Jabra Evolve2 Buds True Wireless Earbuds Instructions
- June 15, 2024
- Jabra
Table of Contents
Jabra Evolve2 Buds True Wireless Earbuds
Specifications
- Product Model: Jabra Evolve2 Buds – USB-A UC
- Compatibility: USB-A
- Connection: Wireless Bluetooth
- Supported Devices: Computers, Laptops, and other devices with USB-A ports
- Battery Life: Up to 24 hours (with charging case)
- Charging Time: Approximately 2 hours
- Wireless Range: Up to 10 meters
Product Usage Instructions
Pairing the Jabra Evolve2 Buds with a device
- Ensure that the Jabra Evolve2 Buds are charged and turned on.
- Put the Jabra Evolve2 Buds in pairing mode by pressing and holding the pairing button on the charging case until the LED indicator starts flashing.
- On your device, enable Bluetooth and search for available devices.
- Select “Jabra Evolve2 Buds” from the list of available devices.
- Follow the on-screen prompts to complete the pairing process.
Charging the Jabra Evolve2 Buds
- Connect the USB-A end of the charging cable to a USB-A port on your computer or other compatible device.
- Connect the other end of the charging cable to the charging case.
- Place the Jabra Evolve2 Buds into the charging case.
- Ensure that the charging case is connected to a power source.
- The LED indicators on the charging case will show the charging progress. When fully charged, all LED indicators will turn solid.
Using the Jabra Evolve2 Buds
- To turn on the Jabra Evolve2 Buds, remove them from the charging case.
- Put the earbuds into your ears and adjust for a comfortable fit.
- To play or pause audio, press the button on either earbud once.
- To answer or end a call, press the button on either earbud once.
- To adjust the volume, press the button on the right earbud for volume up and the left earbud for volume down.
- To activate voice assistant, press and hold the button on either earbud.
FAQ
Q: What can I do if the pairing steps are not successful?
If the pairing steps are not successful, try the following troubleshooting
steps:
- Ensure that the Jabra Evolve2 Buds are charged and turned on.
- Reset the Jabra Evolve2 Buds by placing them in the charging case and holding the pairing button for 10 seconds until the LED indicators flash.
- Restart your device and try pairing again.
- If possible, try pairing with a different device to isolate any device-specific issues.
- Contact Jabra support for further assistance if the issue persists.
PAIRING
What can I do if the pairing steps are not successful?
If the pairing steps are not successful, try the following troubleshooting
steps. Try re-pairing after you complete each troubleshooting step.
- Restart your mobile device by turning it off and on.
- Restart your Jabra device by turning it off and on.
- Ensure your Jabra device is in pairing mode. See the following section,
- Related Frequently Asked Questions, for guidance on how to pair your Jabra device.
- On your mobile device, turn Bluetooth off and on.
- Try to pair your Jabra device using a different mobile device. This is to confirm that a different mobile device will find and pair with your Jabra device.
- Ensure your Jabra device is updated with the latest firmware version.
- Reset your Jabra device. See the following section, Related Frequently Asked Questions, for guidance on how to reset your Jabra device.
- If you still cannot pair your Jabra device with your mobile device, contact support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>