LANDMANN 82427 Firewood Caddy with Cover Owner’s Manual

: July 27, 2024
: LANDMANN

Table of Contents

82427 Firewood Caddy with Cover
PARTS LIST
FIREWOOD CADDY ASSEMBLY INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Landmann 82428
Owner’s Manual

82427 Firewood Caddy with Cover

This Owner’s Manual is provided and hosted by Appliance Factory Parts.
Shop genuine replacement parts for Landmann 82428
Find Your Landmann Fireplace Parts – Select From 49 Models
——– Manual continues below ——– FIREWOOD CADDY
Assembly and Use
Instructions for Model:
82427
82428
VER. 3, 10/5/2012

READ FIRST!
RULES FOR SAFE USE

DO NOT USE OR STORE NEAR SOURCES OF HEAT.
DO NOT OVERLOAD.
THE MAXIMUM WEIGHT CAPACITY IS 150 LBS.
LOAD WOOD CAREFULLY AND DISTRIBUTE FIREWOOD EVENLY ON THE FIREWOOD CADDY.
USE CAUTION AS FIREWOOD MAY SHIFT DURING USE.
DO NOT OVER INFLATE THE TIRES!
SLOWLY AND CAREFULLY INFLATE THE TIRES TO 30 PSI.
MAXIMUM TIRE PRESSURE IS 30 PSI, DO NOT EXCEED!

Thank you for your purchase of the Firewood Caddy with Cover. At Landmann USA, we strive to provide you with an easy to use, easy to assemble product. Should you have questions, issues, a defective part or if you have any questions concerning its use, please contact us at: customerservice@landmann- usa.com
-OR1-800-321-3473 M-F 8-5 Eastern Time Proof of purchase may be required.
Distributed by Landmann® USA
Cartersville, GA 30120
www.landmann-usa.com
Made in China
© 2012 Landmann USA

PARTS LIST

FIREWOOD CADDY ASSEMBLY INSTRUCTIONS

For easiest assembly, follow the assembly steps in this order.
STEP 1
An adjustable wrench or socket wrench with 10MM socket is needed for assembly.
Assembly time: 10 minutes
STEP 2
Assemble axle rail [ CC1 ] to bottom rail [ BB1 ] using (2) 35MM bolts [ M ], (2) washers [ N ] and (2) hexnuts [ P ] as shown in DIAGRAM 1.
Repeat step for axle rail [ CC2 ] and bottom rail [ BB2 ].
STEP 3
Insert axle [ E ] through holes in bottom rails. Slide axle until it comes to the stops. See DIAGRAM 2 and 2B. Slide on the (2) spacers [ I ] as shown.
Slide tire and wheel [ F ] onto the axle [ E ] and spacers [ I ]. Lock tire and wheel to axle using (1) cotter pin [ J ] per side. Bend cotter pin ends to lock. See DIAGRAM 2 and 2B.
STEP 4
Insert front rail [ DD ] into the bottom rails and attach using (2) 35MM bolts [ M ], (2) washers [ N ] and (2) hexnuts [ P ]. See DIAGRAM 3.
STEP 5
Insert handle rail [ AA ] into the axle rails and attach using (2) 35MM bolts [ M ], (2) washers [ N ] and (2) hexnuts [ P ]. See DIAGRAM 3.
STEP 6
Make sure all bolts are tightened securely.
STEP 7
Note the tires are only partially inﬂated for shipping purposes. Carefully inﬂate tires to 30 psi before use.
STEP 8
Use cover to keep ﬁrewood out of the weather. DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-800-321-3473 FOR ASSISTANCE.
30 PSI
MAXIMUM TIRE PRESSURE!
WARNING!
DO NOT OVER INFLATE THE TIRES!
SLOWLY AND CAREFULLY INFLATE THE TIRES TO 30 PSI. MAXIMUM TIRE PRESSURE IS 30 PSI, DO NOT EXCEED!