BEGA 51 055.5 Track Spotlight Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 51 055.5 Track Spotlight
Product Information
Product Usage Instructions
Dimensions
Product Description
Specifications
Installation
Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 51 055.5 Track Spotlight

BEGA-51-055-5-Track-Spotlight-product

Product Information

The product is a track spotlight with an adapter. It features a cast aluminum luminaire housing with a velvet black finish. The track adapter is made of polycarbonate and has an integrated LED power supply unit. The luminaire also includes a safety glass with optical texture and a reflector surface made of pure aluminium. The LED cover is made of light-diffusing synthetic material. The LED power supply unit operates at 220-240 V and 50/60 Hz. The luminaire is DALI-controllable, with one DALI address. The product complies with national safety regulations and should be installed and operated by a qualified electrician. The manufacturer does not accept liability for damage caused by improper use or installation. Modifications to the luminaire should only be made by authorized personnel.

The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. Additional overvoltage protection components are recommended for further protection against transients. The product has different module designations based on the colour temperature, colour rendering index, module luminous flux, luminaire luminous flux, and luminaire luminous efficiency. The connected wattage for the lamp module is 21.6 W, and the connected wattage for the luminaire is 25 W. The rated temperature and ambient temperature should be considered for proper operation.

Product Usage Instructions

Ensure that the product is installed and commissioned by a qualified electrician.
Follow the national safety regulations during installation and operation of the luminaire.
If modifications are required, they should be performed by authorized personnel.
Consider using separate overvoltage protection components for additional protection against transients.
Refer to the module designations for information on the colour temperature, colour rendering index, module luminous flux, luminaire luminous flux, and luminaire luminous efficiency.
Take note of the connected wattage for the lamp module and luminaire.
Pay attention to the rated temperature and ambient temperature for proper functioning of the product.

Dimensions

BEGA-51-055-5-Track-Spotlight-fig-1

Application

Ceiling mounted track spotlight · indoor luminaire for 3-phase Eurostandard-Plus® track systems.
The optical system of the washer is swivelmounted and rotatable.
Symmetrical wide beam light distribution.

Product Description

Track spotlight with adapter
Cast aluminium luminaire housing, finish Colour velvet black,
Polycarbonate track adapter with integrated
LED power supply unit
Safety glass with optical texture
Reflector surface made of pure aluminium
Light-diffusing synthetic LED cover
LED power supply unit
220-240 V 50/60 Hz
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
Safety class II
CE: Conformity mark
Weight: 0.65 kg
This product contains light sources of energy efficiency class(es) E

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Specifications

Lamp

Module connected wattage: 21.6 W
Luminaire connected wattage: 25 W
Rated temperature: ta = 25 °C
Ambient temperature: ta max = 30 °C
Service life criteria: 50 000 h / L70

51 055.5 K3

Module designation: LED-1258/930
Colour temperature: 3000 K
Colour rendering index: CRI > 90
Module luminous flux: 2670 lm
Luminaire luminous flux: 1734 lm
Luminaire luminous efficiency: 69,4 lm / W

51 055.5 K4

Module designation: LED-1258/940
Colour temperature: 4000 K
Colour rendering index: CRI > 90
Module luminous flux: 2770 lm
Luminaire luminous flux: 1800 lm
Luminaire luminous efficiency: 72 lm / W

Light technique

Track spot · surface washer with adjustable optical system.
Optical system 0-340° swivel-mounted and ± 310° infinitely rotatable around the vertical luminaire axis.
Symmetrical wide beam light distribution. Half beam angle 90°

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
The track spotlight with adapter is ready for operation in 3-phase EUROSTANDARD-PLUS® track systems.
The mounting is done without tools in the bus bar.

IMPORTANT

Ensure that the adapter’s two lateral stays are located on the same side as the matching guide profile of the track before installing the adapter in the 3-phase EUROSTANDARDPLUS ® track system.
To select the phase ( 1 2 3 ) the turning knob on the rear side of the adapter has to be operated accordingly.
Place the surface washer adapter flush on the conductor rail in the desired position.
Push the two fixing levers on the underside of the adapter to the right until they click into their end position.
Set the desired LED beam direction by turning and tilting the luminaire housing.
Move the two fixing levers in opposite directions until they disengage to unlock the adapter.

Maintenance

Cleaning /Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools.
Disconnect the system and open the luminaire.
Uninstall the reflector.
Please follow the installation instructions for the LED module.
Install the reflector. Defective glass must be replaced. Close the luminaire.

Spares