BEGA 12 149 Ceiling and Wall Luminaire for Indoor Use Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 12 149 Ceiling and Wall Luminaire for Indoor
Product Usage Instructions:
Instructions for use
Product Description
Safety
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 12 149 Ceiling and Wall Luminaire for Indoor

Product Information:

Product Description: This luminaire is made of aluminium alloy with a white finish. It features hand-blown opal glass with a satin matte texture.
Earth Conductor Connection: The luminaire has an earth conductor connection for safety purposes.
Digital Control: It has a 2-pole connecting terminal for digital control.
LED Power Supply Unit: The luminaire operates on a LED power supply unit with an input voltage range of 220-240 V and output voltage range of DC 170-280 V. The frequency range is 50-60
Hz. – DALI-Controllable: The luminaire can be controlled using a DALI system.
Basic Insulation: There is basic insulation provided between the mains and control lines.
Safety Class: The luminaire belongs to Safety Class I, which means it has an additional protective grounding connection.
Protection Class: It has a protection class rating of IP 44, which means it is protected against solid objects larger than 1 mm and splash water.
Impact Strength: The luminaire has an impact strength rating of IK05, which means it is protected against mechanical impacts. – Weight:
The weight of the luminaire is 4.0 kg.

Product Usage Instructions:

Safety Precautions:

The installation and operation of this luminaire should comply with national safety regulations.

Only a qualified electrician should carry out the installation and commissioning.
Improper use or installation may cause damage, and the manufacturer does not accept liability for such instances.
Any modifications made to the luminaire should be done by a responsible person who will be considered the manufacturer.
Overvoltage Protection: – The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547 standards. – For additional protection against transients and other electrical disturbances, it is recommended to use separate overvoltage protection components, which can be found on the manufacturer’s website.
Product Specifications:

Lamp Module

Connected Wattage: 26.4 W
Luminaire Connected Wattage: 30.6 W –
Rated Temperature: The luminaire can operate within a certain temperature range. Please refer to the manufacturer’s specifications for the specific values.
Ambient Temperature: The luminaire can be used in environments within a certain temperature range. Please refer to the manufacturer’s specifications for the specific values.

Module Information:

Module Designation: 4x
LED-0262/927 – Colour Temperature: 2700 K
Colour Rendering Index (CRI): > 90
Module Luminous Flux: 4440 lm
Luminaire Luminous
Flux: 2976 lm
Luminaire Luminous Efficiency: 97.3 lm/W 5. Module Information (Alternate Option):
Module Designation: 4x LED-0262/930 – Colour Temperature: 3000 K
Colour Rendering Index (CRI): > 90
Module Luminous Flux: 4460 lm
Luminaire Luminous Flux: 2990 lm
Luminaire Luminous Efficiency: 97.7 lm/W Please refer to the manufacturer’s website or contact customer support for further assistance or detailed information.

Ceiling and wall luminaire for indoor use

Instructions for use

Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt and aluminium alloy housing, for all lighting tasks. They are ideal for places where a soft and uniform lighting distribution is required. Luminaire with a high protection class.

Product Description

Luminaire made of aluminium alloy
Finish Colour white
Hand-blown opal glass, satin matt 2 mounting holes ø 5.5 mm
Distance apart 165 x 165 mm 2 cable entries for through-wiring for mains cable up to ø 11 mm max. 5 x 1.5@ Connection terminal 2.5@
Earth conductor connection 2-pole connecting terminal for digital control
LED power supply unit 220-240 V x 0/50-60 Hz
DC 170-280 V
DALI-controllable
Basic insulation is provided between the mains and control cables
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 44
Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK05
Protection against mechanical impacts < 0.7 joule
– Safety mark
– Conformity mark
Weight: 4.0 kg
This product contains light sources of energy efficiency classes D

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 26.4 W
Luminaire connected wattage 30.6 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 30 °C

12 149 K27

Module designation 4x LED-0262/927
Colour temperature 2700 K
Colour rendering index CRI > 90
Module luminous flux 4440 lm
Luminaire luminous flux 2976 lm
Luminaire luminous efficiency 97,3 lm / W

12 149 K3

Module designation 4x LED-0262/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 4460 lm
Luminaire luminous flux 2990 lm
Luminaire luminous efficiency 97,7 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Lead the mains supply cable through the cable entry into the luminaire back housing.
Fix luminaire back housing with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets. Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection.
For digital control please use the connecting terminal DA, DA.
In case this terminal is not used the luminaire will be operated at full light output. Disassemble the rod safety clamps.
Insert the opal glass into lower spring clips, centralise it and push into the upper spring clips.
Assemble the rod safety clamps.

Relamping · Maintenance

Disconnect the electrical installation. Disassemble the rod safety clamps.
Pull glass out of the spring clips and remove from the luminaire back housing.
Clean glass and luminaire regularly with solvent-free cleansers from dirt.
Disassemble LED module.
Assemble LED replacement module.
Note installation instructions of the LED module.
Snap the glass into the lower spring clips, centralise and push into the upper spring clips. Assemble the rod safety clamps.
A broken glass must be replaced.

Spares