BEGA 50 658 Ceiling and Wall Luminaire for Indoor Use Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 50 658 Ceiling and Wall Luminaire for Indoor Use
Product Information
| Feature | Description |
|---|---|
| Safety | The installation and operation of this luminaire are subject to |
national safety regulations. Installation and commissioning may
only be carried out by a qualified electrician. The manufacturer
accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the
luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Overvoltage Protection| The electronic components installed in the luminaire
are
protected against overvoltage in accordance with DIN EN 61547. To
achieve additional protection against transients and other issues,
separate overvoltage protection components are recommended. These
components can be found on the manufacturer’s website at
www.bega.com.
Lamp Module Connected Wattage| 11.2 W
Luminaire Connected Wattage| 13.4 W
Rated Temperature| Ambient temperature range: 25°C to 45°C
Module Designation| 4x LED-0264/927
Colour Temperature| 2700 K
Colour Rendering Index| CRI > 90
Module Luminous Flux| 1780 lm
Luminaire Luminous Flux| 1189 lm
Luminaire Luminous Efficiency| 88.7 lm/W
Product Usage Instructions
- Luminaire with trim ring: Before installing onto the mounting surface, the luminaire housing must be inserted into the trim ring (accessory).
- Metal trim rings in 4 surfaces are optional accessories available for this luminaire. Trim rings must be ordered separately.
- If any replacement parts are needed, the following items can be ordered:
| Part | Description | Part Number |
|---|---|---|
| Spare Glass | Ersatzglas | 11 002 873 .0R G |
| LED Power Supply Unit | LED-Netzteil | DEV-0136/500 |
| LED Module 2700 K | LED-Modul 2700 K | LED-0264/927 |
| LED Module 3000 K | LED-Modul 3000 K | LED-0264/930 |
Ceiling and wall luminaire for indoor use
DIMENSIONS
Instructions for use
Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt and aluminium alloy housing, for all lighting tasks. They are ideal for places where a soft and uniform lighting distribution is required. Luminaire with a high protection class.
Product Description
- Luminaire made of aluminium alloy Finish Colour white Hand-blown opal glass, satin matt, with sliding-bolt closure 2 mounting holes ø 5.5 mm Distance apart 150 mm
- 1 cable entry for mains supply cable up to ø 10.5 mm max. 3 x 1.5@ Connection terminal 2.5@ Earth conductor connection
- LED power supply unit 220-240 V x 0/50-60 Hz DC 176-280 V
- BEGA Thermal Switch® Temporary thermal s hutdown to protect temperature-sensitive components
- Safety class I
- Protection class IP 44
- Protected against granular foreign bodies ≥ 1 mm and splash water
- Impact strength IK04
- Protection against mechanical
- impacts < 0.5 joule
- Safety mark
- Conformity mark
- Weight: 1.7 kg
This product contains light sources of energy efficiency classes D
Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.
Lamp
-
Module connected wattage: 11.2 W
-
Luminaire connected wattage: 13.4 W
-
Rated temperature: ta = 25 °C
-
Ambient temperature: ta max = 45 °C
50 658 K27 -
Module designation: 4x LED-0264/927
-
Color temperature: 2700 K
-
Color rendering index: CRI > 90
-
Module luminous flux: 1780 lm
-
Luminaire luminous flux : 1189 lm
-
Luminaire luminous efficiency : 88,7 lm / W
50 658 K3 -
Module designation: 4x LED-0264/930
-
Color temperature: 3000 K
-
Color rendering index: CRI > 90
-
Module luminous flux Luminaire: 1800 lm
-
Luminaire luminous efficiency : 1203 lm
-
Luminaire with trim ring: 89,8 lm / W
Luminaire with trim ring:
Before installing onto the mounting surface the luminaire housing must be
inserted into the trim ring (accessory).
Installation
LED are high-quality electronic components!
- Please avoid touching the light output opening of the LED directly during installation or relamping. Lead mains supply cable through the cable entry into the luminaire housing.
- Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface. It is imperative to use the enclosed gaskets. Make earth conductor connection.
- Push silicone sleeves over the lines and make electrical connection.
- Place glass to the luminaire housing and observe that the holding spring bolts fit into the notches of the glass.
- Turn the glass clockwise until it is locked. Thus, you reach a safe and vibration-resistant holding of the glass.
- To release the glass from the luminaire housing, turn it counterclockwise.
Replacement of the LED module Maintenance
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
- Disconnect the system.
- Unscrew glass from the luminaire housing by turning it counterclockwise.
- Clean glass and luminaire regularly with solvent-free cleansers from dirt.
- Please follow the installation instructions for the LED module.
- Screw in glass by turning it clockwise as far as it will go.
- A broken glass must be replaced.
Accessory Trim rings
For this luminaire metal trim rings in 4 surfaces are optionally available. Trim rings are accessories and must be ordered separately.
Item
- Color white: 13 058
- Stainless steel: 13 059
- Chrome: 13 060
- Brass: 13 061
Spares
- Spare glass: 11 002 873 .0R G
- LED power supply unit: DEV-0136/500
- LED module 2700 K: LED-0264/927
- LED module 3000 K: LED-0264/930
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com