BEGA 24219 Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 24219 Wall Luminaire
DIMENSIONS
Application
Wall luminaire with directed light.
A luminaire with concentrated light distribution downwards which additionally
utilises the reflection properties of the mounting surface.
Product description
Luminaire made of aluminium alloy, aluminium and stainless steel BEGA Unidure®
coating technology Colour graphite or silver Matt safety glass Silicone gasket
Reflector made of pure anodised aluminium 2 mounting holes ø 5mm Distance
apart 240mm 2 cable entries for through-wiring of mains supply cable ø
7-10.5mm Connecting terminal and earth conductor terminal 2.5@ LED power
supply unit 220-240 V 0/50-60 Hz DC 176-276 V BEGA Thermal Switch® Temporary
thermal shutdown to protect temperature-sensitive components Safety class I
Protection class IP65 Dust-tight and protection against water jets Impact
strength IK07 Protection against mechanical impacts < 2 joule
– Safety mark
– Conformity mark
Weight: 3.7 kg
This product contains light sources of energy efficiency class(es) B, C
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the luminaire, the
person responsible for these modifications shall be considered the
manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e.g. transients, etc. we recommend
separate overvoltage protection components.
You can find them on our website at www.bega.com.
Dark Sky
The light from this luminaire is directed evenly and highly efficiently onto the surface to be illuminated and emits less than 1% of the luminaire luminous flux into the upper half space of the luminaire.
Lamp
Module connected wattag e 13.4 W
Luminaire connected wattage 16.8 W
Rated temperature ta =25 °C
Ambient temperature ta max =45 °C
24 219K3
Module designation LED-0731/830
Colour temperature 3000 K
Colour rendering index CRI >80
Module luminous flux 2650 lm
Luminaire luminous flux 1762 lm
Luminaire luminous efficiency 104,9 lm/W
24 219K4
Module designation LED-0731/840
Colour temperature 4000 K
Colour rendering index CRI >80
Module luminous flux 2725 lm
Luminaire luminous flux 1811 lm
Luminaire luminous efficiency 107,8 lm/W
Installation
LED are high-quality electronic components! Please avoid touching the light
output opening of the LED directly during installation or relamping.
In outdoor areas, the light emission may only be directed downwards.
Undo the screws and lift off the luminaire top. Lead the mains supply cable
through the cable entry of the luminaire base.
Note position of application of the luminaire “arrow down”.
Fix luminaire base with enclosed or any other suitable fixing material onto
the mounting surface.
Be sure to use the gasket rings supplied.
Make the earth conductor connection and the electrical connection.
In order to guarantee the maximum service life of the electrical components,
the enclosed desiccant pouch must be placed in the luminaire.
Remove the desiccant pouch from the foil packaging and place it in the
position marked by the red information label immediately before finally
closing the luminaire.
Make sure that gasket is positioned correctly.
Make earth conductor connection between luminaire top and luminaire base.
Replace the luminaire top and tighten the screws evenly
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use high pressure cleaners.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to
those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation
instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced. Close the luminaire.
Spares
LED power supply unit DEV-0152/350
LED module 3000 K LED-0731/830
LED module 4000 K LED-0731/840
Reflector 76 001 161
Gasket 83 001 036
BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>