BEGA 66 151 Compact Downlight Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

Dimension
Application
Product description
Safety
Overvoltage protection
Lamp
Lighting technology
Installation
Cleaning · Maintenance
Replacing the LED module
Spares
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 66 151 Compact Downlight

Dimension

Installation

Application

Compact downlight with symmetrical narrow beam light distribution.

Product description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite or white
Safety glass with optical structure
Silicone gasket
BEGA Vortex Optics® .
Reflector surface made of pure aluminium 2 mounting holes ø 4.8mm
Distance apart 70mm
1 cable entry for mains supply cable up to ø 10,5mm
Connection terminal 2.5@
Earth conductor connection
BEGA Ultimate Driver®
LED power supply unit
220-240 V 0/50-60 Hz
DC 176-264 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect
temperature-sensitive components
Safety class I
Ball proof according to DIN VDE 0710 part 13
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK06
Protection against mechanical impacts < 1 joule
– Safety mark
– Conformity mark
Weight: 0.85 kg
This product contains light sources of energy efficiency class(es) C

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage: 3 W
Luminaire connected wattage: 4.1 W
Rated temperature: ta=25 °C
Ambient temperature: ta max=50 °C

66 151K3

Module designation: LED-0591/830
Colour temperature: 3000 K
Colour rendering index: CRI >80
Module luminous flux: 560 lm
Luminaire luminous flux: 353 lm
Luminaire luminous efficiency: 86,1 lm/W

66 151K4

Module designation: LED-0591/840
Colour temperature: 4000 K
Colour rendering index: CRI >80
Module luminous flux: 580 lm
Luminaire luminous flux: 365 lm
Luminaire luminous efficiency: 89 lm/W

Lighting technology

Half beam angle 24°

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.

Undo the screws and lift off the luminaire top. Lead the mains supply cable through the cable entry into the luminaire back housing. Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
Be sure to use the gasket rings supplied. Make earth conductor connection. Push silicone sleeves over the lines and make electrical connection.

In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.

Make earth conductor connection between luminaire top and luminaire base. Push plug into coupler as far as it will go.

Installation

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use high pressure cleaners.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced. Close the luminaire.

Spares

Housing + Glass graphite: 25 000 013
Housing + Glass white: 25 000 014
LED power supply unit: DEV-0303/350
LED module 3000 K: LED-0591/830
LED module 4000 K: LED-0591/840
Reflector: 76 001 426G
Gasket: 83 001 570