BEGA 50072.1 LED Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50072.1 LED Wall Luminaire
Product Information
Product Usage Instructions
DIMENSIONS
Instructions for use
Product Description
Safety
Overvoltage protection
Installation
Cleaning · Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50072.1 LED Wall Luminaire

Product Information

This product is a luminaire that requires installation and operation in compliance with national safety regulations. It is recommended to have a qualified electrician carry out the installation and commissioning. The manufacturer does not accept liability for any damage caused by improper use or installation. The luminaire is equipped with electronic components that are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is advisable to use separate overvoltage protection components, which can be found on the manufacturer’s website.

The product specifications are as follows:

Lamp Module connected wattage: 12.8 W
Luminaire connected wattage: 14.8 W
Rated temperature: 25°C
Ambient temperature: 30°C
Module designation: 2x LED-0518/930
Colour temperature: 3000 K
Colour rendering index (CRI): > 90
Module luminous flux: 1910 lm
Luminaire luminous flux: 652 lm
Luminaire luminous efficiency: 44.1 lm/W

The luminaire is designed with a replaceable LED module. The LED module’s designation can be found on a label inside the luminaire. When replacing the module, ensure that the light color and output of the replacement module match the original module. The replacement process can be carried out by qualified individuals using standard tools. Before replacing the module, disconnect the system and open the luminaire. Follow the installation instructions provided for the LED module. If the glass is defective, it should be replaced before closing the luminaire.

Product Usage Instructions

Ensure that the installation and commissioning of the luminaire are performed by a qualified electrician in accordance with national safety regulations.
Consider using separate overvoltage protection components for additional protection against transients. These components can be found on the manufacturer’s website.
Ensure that the lamp module connected wattage is 12.8 W and the luminaire connected wattage is 14.8 W.
Maintain an ambient temperature of 30°C or below for proper functioning of the luminaire.
Verify that the module designation is 2x LED-0518/930 and the color temperature is 3000 K.
Confirm that the color rendering index (CRI) is greater than 90, the module luminous flux is 1910 lm, and the luminaire luminous flux is 652 lm.
If the LED module needs replacement, follow these steps:
Disconnect the system and open the luminaire.
Locate the label inside the luminaire to identify the designation of the LED module.
Select a replacement module with matching light color and output.
Replace any defective glass before closing the luminaire.

DIMENSIONS

BEGA-50072-1-LED-Wall-Luminaire-FIG-1

Instructions for use

Application

Wall luminaire · indoor luminaire with integrated power supply unit for many lighting tasks in interior applications.
The light emits upwards and downwards.

Product Description

Die-cast zinc luminaire housing, finish Colour white
Crystal glass, inside white 2 elongated fixing holes
Width 4.5 mm · 150 mm spacing 2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@
Connection terminal 2.5@
Earth conductor connection
LED power supply unit 220-240 V 0/50-60 Hz
DC 176-276 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
– Safety mark
– Conformity mark
Weight: 1.3 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 12.8 W
Luminaire connected wattage 14.8 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 30 °C

50 072.1 K3

Module designation 2x LED-0518/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 1910 lm
Luminaire luminous flux 652 lm
Luminaire luminous efficiency 44,1 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Undo screws and lift off luminaire top.
Lead the mains supply cable through the cable entry into the luminaire back housing.
Note position of application “arrow down”.
Fix luminaire back housing with enclosed or any other suitable fixing material onto the mounting surface.
Pull silicone sleeves over the wires.
Make earth connection and electrical connection to the terminals.
Make earth conductor connection between luminaire top and luminaire base (plug connection).
Note position of application “arrow down” of luminaire housing.
Install luminaire top part, adjust it and tighten screws.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Defective glass must be replaced.
Close the luminaire.

Spares