BEGA 33147 Wall Luminaire Instruction Manual

BEGA 33147 Wall Luminaire

Product Information

Product Usage Instructions

The Wandleuchte Wall luminaire Applique is a shielded wall luminaire made of aluminium alloy and hand-blown three-ply opal glass. It provides uniform light distribution and can be used for various lighting tasks in both interior and exterior applications.

Safety: The installation and operation of this luminaire must comply with national safety regulations. Only a qualified electrician should perform the installation and commissioning. The manufacturer is not liable for any damage caused by improper use or installation. Any modifications made to the luminaire must be done by a responsible person who will then be considered the manufacturer.

Additional BEGA LED lamps: This luminaire is compatible with additional BEGA LED lamps. The following product codes are available:

For detailed technical and lighting data for the lamps, please  refer to the data sheets available on our website.

Spares: The following spare parts are available for this product:

Instructions for use

Application
Shielded wall luminaire made of aluminium alloy and hand-blown three-ply opal glass. A luminaire with uniform light distribution for a variety of lighting tasks in interior and exterior lighting applications.

Product Description

• Luminaire made of aluminium alloy and stainless steel
• BEGA Unidure® coating technology
• Opal glass with sliding bolt glass closure
• 2 mounting holes ø 5.5 mm
• Distance apart 150 mm
• 1 cable entry for mains supply cable
• up to ø 10,5 mm
• Lampholder terminal 2.5@
• Earth conductor connection
• Lampholder E 27
• Safety class I
• Protection class IP 44
• Protected against granular foreign bodies
• ≥ 1 mm and splash water
• Impact strength IK06
• Protection against mechanical  impacts < 1 joule
• – Safety mark
• – Conformity mark
• Weight: 2.2 kg

Lamp

• Luminaire with screw base E 27
• Lamp output max. 75 W
• This product contains light source of energy efficiency class E

Supplied lamp

• BEGA LED lamp 13 590
• LED Retrofit 12 W
• 1400 lm
• 3000 K
• Luminaire efficiency: 39%

Additional BEGA LED lamps are available for this luminaire:

• 13 584 LED 7 W
• 805 lm
• 3000 K
• 13 586 LED 7 W
• 805 lm
• 3000 K dimmable
• 13 588 LED 8 W
• 1055 lm
• 3000 K
• 13 592 LED 12 W
• 1400 lm
• 3000 K dimmable

Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Installation

Lead the mains supply cable through the cable entry into the luminaire back housing. Note position of application of the luminaire arrow down«. Fix luminaire back housing with enclosed or any other suitable fixing material onto the mounting surface. It is absolutely essential to use the enclosed gaskets. Make earth conductor connection.Push silicone sleeves over the lines and make mains supply connection. Insert the lamp. Insert the opal glass into the luminaire back housing with sliding bolt glass closure and turn it clockwise.

Relamping · Maintenance

Disconnect the electrical installation.Open the luminaire and clean. Use only solvent-free cleansers. Change the lamp. Close the luminaire. When cleaning please do not use high pressure cleaners.

Spares

• Spare glass with graphite cap: 11 002 376 S1
• Spare glass with white cap: 11 002 376 W1
• LED lamp 3000K: 13 590
• Lampholder: 63 000 052

BEGA Gantenbrink-Leuchten KG
Postfach 31 60
58689 Menden
info@bega.com
www.bega.com

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>