BEGA 12 209.3 Wall Luminaire for Indoor Use Instruction Manual

BEGA 12 209.3 Wall Luminaire for Indoor Use

Product Information

• Product Name: Wall Luminaire
• Description: Enclosed and free-radiating wall luminaire made of hand-blown opal glass, with metal housing, for all lighting tasks in interior applications.

Safety:
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage Protection:
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against transients, etc., we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

• Lamp Module Connected Wattage: 7.9 W
• Luminaire Connected Wattage: 10 W
• Rated Temperature: 25°C
• Ambient Temperature: 25°C
• Module Designation: LED-0589/830
• Colour Temperature: 3000 K
• Colour Rendering Index (CRI): > 90
• Module Luminous Flux: 1040 lm
• Luminaire Luminous Flux: 556 lm
• Luminaire Luminous Efficiency: 55.6 lm / W
• Spare Glass Part Number: 11 003 155 .1
• LED Power Supply Unit Part Number: DEV-0177/350
• LED Module 3000 K Part Number: LED-0589/930
• Shield Part Number: 72 001 007 M

Product Usage Instructions

1. To replace the LED module, note the designation of the LED module from the label in the luminaire.
2. Disconnect the system and open the luminaire.
3. Follow the installation instructions for the LED module.
4. If the glass is defective, replace it.
5. Close the luminaire.

Note: The replacement modules have the same light color and light output as the modules originally fitted.

Spare Parts

• Spare Glass Part Number: 11 003 155 .1
• LED Power Supply Unit Part Number: DEV-0177/350
• LED Module 3000 K Part Number: LED-0589/930
• Shield Part Number: 72 001 007 M

Application

Enclosed and free-radiating wall luminaire made of hand-blown opal glass, with metal housing, for all lighting tasks in interior applications.

Product Description

• Metal luminaire housing, finish Chrome
• Hand-blown opal glass
• Metal shield, chrome finish 2 mounting holes ø 4.5 mm
• Distance apart 138 mm 2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@
• Connection terminal 2.5@
• Earth conductor connection
• LED power supply unit 220-240 V y 50-60 Hz
• BEGA Thermal Switch®
• Temporary thermal shutdown to protect temperature-sensitive components
• Safety class I
  • Safety mark
  • Conformity mark
• Weight: 1.1 kg
• This product contains light sources of energy efficiency class(es) D

Safety

• The installation and operation of this luminaire are subject to national safety regulations.
• Installation and commissioning may only be carried out by a qualified electrician.
• The manufacturer accepts no liability for damage caused by improper use or installation.
• If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

• The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
• To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
• You can find them on our website at www.bega.com.

Lamp Specification

• Module connected wattage 7.9 W
• Luminaire connected wattage 10 W
• Rated temperature ta = 25 °C
• Ambient temperature ta max = 25 °C

12 209.3 K3

• Module designation LED-0589/830
• Colour temperature 3000 K
• Colour rendering index CRI > 90
• Module luminous flux 1040 lm
• Luminaire luminous flux 556 lm
• Luminaire luminous efficiency 55,6 lm / W

Installation

• The luminaire must only be operated with the complete protective cover.
• LED are high-quality electronic components!
• Please avoid touching the light output opening of the LED directly during installation or relamping.
• Lead the mains supply cable through the cable entry into the luminaire housing.
• Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
• Be sure to use the gasket rings supplied.
• Make earth conductor connection.
• Push silicone sleeves over the lines and make electrical connection.
• Insert the glass into luminaire housing and fix it by screwing the shield hand-tight clockwise onto the glass.
• Remove the protective film from the shield.
• NOTE: If adhesive residue from the protective film remains on the edge of the shield, it can be removed using commercially available lighter fluid.

Dimension

Cleaning And Maintenance

• Clean the luminaire regularly with solvent-free cleansers from dirt.
• The defective glass must be replaced.

Replacement of the LED module

• The designation of the LED module is noted on a label in the luminaire.
• The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted.
• The module can be replaced by qualified persons using standard tools.
• Disconnect the system and open the luminaire.
• Please follow the installation instructions for the LED module.
• The defective glass must be replaced.
• Close the luminaire.

Spares

• Spare glass 11 003 155 .1
• LED power supply unit DEV-0177/350
• LED module 3000 K LED-0589/930
• Shield 72 001 007 M

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com.

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>