BEGA 33 243 Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 33 243 Wall Luminaire
Product Information
Product Usage Instructions
Application
Product Description
Safety
Overvoltage protection
Installation
Dimension
Lamp Specification
Cleaning And Maintenance
Replacing the LED module
Spares
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 33 243 Wall Luminaire

BEGA-33-243-Wall-Luminaire-product

Product Information

Product Name: Wandleuchte Wall luminaire Applique
Model Number: 33 243

Application:
Wall luminaire with directed light. A luminaire with concentrated light distribution downwards which additionally utilises the reflection properties of the mounting surface.

Dark Sky:
The light from this luminaire is directed evenly and highly efficiently onto the surface to be illuminated and emits less than 1% of the luminaire luminous flux into the upper halfspace of the luminaire.

Safety:
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection:
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against e.g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Installation:
LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Make sure that the gasket is positioned correctly. Make an earth conductor connection between the luminaire top and luminaire base. Replace the luminaire top and tighten the screws evenly.

Lamp Module connected wattage: 29.8 W
Luminaire connected wattage: 34 W
Rated temperature: 25°C
Ambient temperature: 40°C
Module Designation: LED-0315/830
Colour temperature: 3000 K
Colour rendering index: CRI > 80
Module luminous flux: 5825 lm
Luminaire luminous flux: 4234 lm
Luminaire luminous efficiency: 124.5 lm / W

Product Usage Instructions

Ensure that the installation and operation of the luminaire comply with national safety regulations. Only a qualified electrician should carry out the installation and commissioning.
Avoid touching the light output opening of the LED directly during installation or relamping to prevent damage to the high-quality electronic components.
Position the gasket correctly before installation.
Create an earth conductor connection between the luminaire top and luminaire base.
Replace the luminaire top and tighten the screws evenly.
If subsequent modifications are made to the luminaire, consider the person responsible for these modifications as the manufacturer.
For additional protection against overvoltage and transients, consider using separate overvoltage protection components available on the manufacturer’s website.

Application

Wall luminaire with directed light.
A luminaire with concentrated light distribution downwards which additionally utilises the reflection properties of the mounting surface.

Product Description

Luminaire made of aluminium alloy and stainless steel
BEGA Unidure® coating technology
Matt safety glass
Silicone gasket
Reflector made of pure anodised aluminium 2 mounting holes ø 5 mm
Distance apart 240 mm 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5 G 1.5@
Connecting terminal and earth conductor terminal 2.5@
BEGA Ultimate Driver®
LED power supply unit 220-240 V x 0/50-60 Hz
DC 176-264 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK06
Protection against mechanical impacts < 1 joule
- Safety mark
- Conformity mark
Weight: 3.8 kg
This product contains light sources of energy efficiency class(es) C

Dark Sky
The light from this luminaire is directed evenly and highly efficiently onto the surface to be illuminated and emits less than 1 % of the luminaire luminous flux into the upper halfspace of the luminaire.

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.

In outdoor areas, the light emission may only be directed downwards.
Undo the screws and lift off the luminaire top.
Lead the mains supply cable through the cable entry of the luminaire base.
Note position of application of the luminaire “arrow down”.
Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
Be sure to use the gasket rings supplied.
Make the earth conductor connection and the electrical connection.
For digital control please use the connecting terminal DA, DA.
In case this terminal is not used the luminaire will be operated at full light output.
In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
Make sure that gasket is positioned correctly.
Make earth conductor connection between luminaire top and luminaire base.
Replace the luminaire top and tighten the screws evenly.

Dimension

BEGA-33-243-Wall-Luminaire-fig-1

Lamp Specification

Module connected wattage 29.8 W
Luminaire connected wattage 34 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 40 °C

33 243 K3

Module designation LED-0315/830
Colour temperature 3000 K
Colour rendering index CRI > 80
Module luminous flux 5825 lm
Luminaire luminous flux 4234 lm
Luminaire luminous efficiency 124,5 lm / W

33 243 K4

Module designation LED-0315/840
Colour temperature 4000 K
Colour rendering index CRI > 80
Module luminous flux 5990 lm
Luminaire luminous flux 4355 lm
Luminaire luminous efficiency 128,1 lm / W

Cleaning And Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high-pressure cleaners.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the
LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.