BEGA 33 514 Wall Luminaire Instruction Manual

BEGA 33 514 Wall Luminaire

Product Information

• Product Name: Wandleuchte Wall luminaire Applique
• Model Number: 33 514
• Module Name: LED-0291/830
• Colour Temperature: 3000 K
• Colour Rendering Index (CRI): > 80
• Module Luminous Flux: 550 lm
• Luminaire Luminous Flux: 205 lm
• Luminaire Luminous Efficiency: 50 lm / W

Product Usage Instructions

1. Ensure that the luminaire is installed on columns or wall faces.
2. Installation and commissioning should only be carried out by a qualified electrician.
3. Before installation, make sure to read and comply with all national safety regulations.
4. The manufacturer will not be liable for any damage caused by improper use or installation.
5. The luminaire is equipped with overvoltage protection, but additional overvoltage protection components are recommended for enhanced protection against transients.
6. In outdoor areas, ensure that the light emission is directed downwards.
7. To install or replace the LED module, undo the screw and lift off the luminaire top. Avoid touching the light output opening directly during installation or relamping.
8. If any parts need to be replaced, refer to the following part numbers: LED power supply unit (DEV-0303/350), LED module 3000 K (LED-0291/830), LED module 4000 K (LED-0291/840), Gasket (83 001 314).

Please note that this is a summary of the product information and usage instructions. For complete details and further assistance, refer to the user manual provided with the product.

Application

Shielded wall luminaire with directed light makes it particularly well-suited for installation on columns and wall faces.

Lamp Specification

• Module connected wattage 3 W
• Luminaire connected wattage 4.1 W
• Rated temperature ta = 25 °C
• Ambient temperature ta max = 50 °C

33 514 K3

• Module designation LED-0291/830
• Colour temperature 3000 K
• Colour rendering index CRI > 80
• Module luminous flux 550 lm
• Luminaire luminous flux 205 lm
• Luminaire luminous efficiency 50 lm / W

33 514 K4

• Module designation LED-0291/840
• Colour temperature 4000 K
• Colour rendering index CRI > 80
• Module luminous flux 565 lm
• Luminaire luminous flux 211 lm
• Luminaire luminous efficiency 51,5 lm / W

Product Description

• Luminaire made of aluminium alloy, aluminium and stainless steel
• BEGA Unidure® coating technology
• Colour graphite or silver
• Silicone gasket 2 mounting holes ø 4.5 mm
• Distance apart 168 mm 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm
• Connection terminal 2.5@
• Earth conductor connection
• BEGA Ultimate Driver®
• LED power supply unit 220-240 V x 0/50-60 Hz
• DC 176-264 V
• BEGA Thermal Switch®
• Temporary thermal shutdown to protect temperature-sensitive components
• Safety class I
• Protection class IP 64
• Dust-tight and protection against splash water
• Impact strength IK07
• Protection against mechanical impacts < 2 joule
  • Safety mark
  • Conformity mark
• Weight: 0.5 kg
• This product contains light sources of energy efficiency class(es) C

Dark Sky
The light from this luminaire is directed evenly and highly efficiently onto the surface to be illuminated and emits less than 1 % of the luminaire luminous flux into the upper halfspace of the luminaire.

Safety

• The installation and operation of this luminaire are subject to national safety regulations.
• Installation and commissioning may only be carried out by a qualified electrician.
• The manufacturer accepts no liability for damage caused by improper use or installation.
• If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

• The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
• To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
• You can find them on our website at www.bega.com.

Installation

• In outdoor areas, the light emission may only be directed downwards.
• Undo screw and lift off luminaire top.
• LED are high-quality electronic components!
• Please avoid touching the light output opening of the LED directly during installation or relamping.
• Lead the mains supply cable through the cable entry of the luminaire base.
• Note position of application of the luminaire “arrow down”.
• Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
• Be sure to use the gasket rings supplied.
• Make earth conductor connection.
• Push silicone sleeves over the lines and make electrical connection.
• Make sure that gasket is positioned correctly.
• Make earth conductor connection between luminaire top and luminaire base.
• Install the luminaire top, press-on and tighten screw.

Dimension

Cleaning And Maintenance

• Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
• Do not use high pressure cleaners.

Replacing the LED module

• The designation of the LED module is noted on a label in the luminaire.
• The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
• The module can be replaced by qualified persons using standard tools.
• Disconnect the system and open the luminaire.
• Please follow the installation instructions for the
• LED module.
• Inspect and, if necessary, replace the luminaire gaskets.
• Defective glass must be replaced.
• Close the luminaire.

Spares

• LED power supply unit DEV-0303/350
• LED module 3000 K LED-0291/830
• LED module 4000 K LED-0291/840
• Gasket 83 001 314

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com.

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>