BEGA 51 204.5 System Pendant Luminaire for Indoor Use Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 51 204.5 System Pendant Luminaire for Indoor Use
Product Information
The product is a pendant luminaire downlight designed for use in combination with various modular BEGA installation components. It features a die-cast aluminium luminaire housing with a velvet black finish and a reflector surface made of pure aluminium. The weight of the luminaire is 1.5 kg. This product contains light sources of energy efficiency class(es) D.
The luminaire requires an additional BEGA installation component (accessory) for connection. It is equipped with a clear safety glass and has the following specifications:
- Lamp Module connected wattage: 16.8 W
- Luminaire connected wattage: 19.8 W
- Colour temperature: 3000 K
- Colour rendering index (CRI): > 90
- Module luminous flux: 2440 lm
- Luminaire luminous flux: 2005 lm
- Luminaire luminous efficiency: 101.3 lm / W
Dimension
Application
- Pendant luminaire downlight · indoor luminaire with wide beam light distribution.
- BEGA Hybrid Optics® : Highly efficient and lowloss light distribution, thanks to reflector and optical lens.
- BEGA System pendant luminaire for use in combination with various modular BEGA installation components.
Product Description
- Pendant luminaire downlight
- Die-cast aluminium luminaire housing, velvet black, Reflector surface made of pure aluminium
- Optical silicone lens · BEGA Hybrid Optics®
- Trim ring · Chrome finish
- Clear safety glass
- Black flex suspension 2 x 0,75
- Overall length of luminaire approx. 1500 mm
- Safety class: III
- CE: Conformity mark
- Weight: 1.5 kg
- This product contains light sources of energy efficiency class(es) D
- Luminaire without canopy, for connection to an additional required
- BEGA Installation component (accessory)
Specifications
Lamp
- Module connected wattage: 16.8 W
- Luminaire connected wattage: 19.8 W
- Rated temperature: ta = 25 °C
- Ambient temperature: ta max = 35 °C
51 204.5 K3
- Module designation: LED-0978/930
- Colour temperature: 3000 K
- Colour rendering index: CRI > 90
- Module luminous flux: 2440 lm
- Luminaire luminous flux: 2005 lm
- Luminaire luminous efficiency: 101,3 lm / W
Lighting technology
- Half beam angle 32°
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Please note
- The luminaire can only be operated with an operating device that fulfills the requirements according to EN 61347-2-13.
- The maximum idle voltage of 60 V DC must conform to SELV or SELV equivalent.
Installation
- LED are high-quality electronic components!
- Please avoid touching the light output opening of the LED directly during installation or relamping.
- Screw enclosed trim ring with attached reflector into the luminaire housing by turning it clockwise.
- To operate this luminaire one of the following additional BEGA Installation components must be ordered – accessoire.
- Please refer to the instructions for use for the BEGA installation component selected for luminaire installation
Please note: The manufacturer accepts no liability for damage caused by improper use or installation if no BEGA installation component is used to install this BEGA system pendant luminaire.
Maintenance
Cleaning /Maintenance
- Clean luminaire regularly with solvent-free cleansers from dirt.
Replacing the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by a qualified person using commercially available tools.
- Disconnect the system and open the luminaire.
- Please follow the installation instructions for the LED module.
- Close the luminaire.
Accessories
- BEGA Installation components with LED power supply unit.
Satin black finish
Depending on the desired type of installation, the following suitable installation components are available for this BEGA system pendant luminaire:
For all level ceilings:
- 13 237: Surface-mounted canopy (Type A)
- DALI · 220-240 V · 490 mA DC
- 13 265: Surface-mounted canopy (Type AS) Smart controllable/dimmable ·
- 220-240 V · 490 mA DC
Suitable for level ceilings and sloped ceilings with a pitch of 0 – 40°:
- 13 243: Surface-mounted canopy (Type B)
- DALI · 220-240 V · 490 mA DC
- 13 249: Recessed canopy (Type C)
- DALI · 220-240 V · 500 mA DC
- 13 271: Recessed canopy (Type CS)
- Smart controllable / dimmable · 220-240 V · 500 mA DC
For flush and surface-mounted 3-phase Eurostandard-Plus® track systems:
- 13 219: Stromschienenadapter (Typ D)
- DALI · 220-240 V · 500 mA DC
For the accessories a separate instructions for use can be provided upon request.
Spares
- Glass/Trim ring: 20 000 042 B4
- LED module 3000 K: LED-0978/930
- Reflector unit: 76 001 611 .1M
BEGA Gantenbrink-Leuchten KG
- Postfach 31 60 · 58689 Menden
- info@bega.com
- www.bega.com