BEGA 23 414 Ceiling and Wall Luminaire for Indoor Use Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 23 414 Ceiling and Wall Luminaire for Indoor Use
Product Information
Safety Information
Product Usage Instructions
DIMENSION
Instructions for use
Product Description
Installation
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 23 414 Ceiling and Wall Luminaire for Indoor Use

Product Information

The product is a luminaire with a metal housing and a white finish. It features hand-blown opal glass with a sliding-bolt closure. The luminaire has a distance of 150 mm between its components. It has one cable entry for through-wiring and a connecting terminal with a plug connection for the mains cable. The LED power supply unit operates on a voltage range of 220-240 V and a frequency range of 50-60 Hz. The luminaire has a weight of 3.5 kg and contains light sources of energy efficiency class D.

Safety Information

The installation and operation of this luminaire must comply with national safety regulations. Only qualified electricians should perform the installation and commissioning. The manufacturer is not liable for any damage caused by improper use or installation. If modifications are made to the luminaire, the person responsible for those modifications will be considered the manufacturer. The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. Additional overvoltage protection components are recommended for protection against transients.

Product Usage Instructions

Before installation, ensure that you have read and understood all safety instructions provided in the manual.
Disassemble the LED module by loosening the LED connection and earth connection (plug connection).
Dismantle the mains supply cable up to a maximum of 80 mm.
Lead the main supply cable through the cable entry into the luminaire housing.
Fix the luminaire housing onto the mounting surface using the enclosed gaskets or any other suitable fixing material.
Make sure to establish proper earth and electrical connections.
Avoid touching the light output opening of the LED directly during installation or relamping.

Note: For detailed technical specifications and additional information, please refer to the product manual available on the manufacturer’s website at www.bega.com.

DIMENSION

BEGA-23-414-Ceiling-and-Wall-Luminaire-for-Indoor-Use-
FIG-1

Instructions for use

Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass and metal housing, for all lighting tasks. They are ideal for places where a soft and uniform lighting distribution is required.

Product Description

Metal housing, finish Colour white
Hand-blown opal glass, with sliding-bolt
closure
2 mounting holes ø 5.5 mm
Distance apart 150 mm
1 cable entry for through-wiring
for mains cable
Connecting terminal 2.5@
with plug connection
Earth conductor connection
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-280 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect
temperature-sensitive components
Safety class I
- r – Safety mark
- c – Conformity mark
Weight: 3.5 kg

This product contains light sources of energy efficiency class(es) D
Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Lamp

Module connected wattage 17 W
Luminaire connected wattage 19.6 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 45 °C
23 414 K3
Module designation LED-0530/930
Color temperature 3000 K
Color rendering index CRI > 90
Module luminous flux 2605 lm
Luminaire luminous flux 1900 lm
Luminaire luminous efficiency 96,9 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Disassemble the LED module. Loosen LED connection and earth connection (plug connection). Dismantle the mains supply cable max. 80 mm. Lead mains supply cable through the cable entry into the luminaire housing. Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface. It is imperative to use the enclosed gaskets. Make earth and electrical connections to the terminal. Make an earth connection between the LED module and luminaire housing (plug connection). Push the plug into the coupler as far as it will go. Assemble LED module. Tighten the screws evenly. Please observe that the LED board is not damaged mechanically.
ATTENTION! It is mandatory to make sure not to damage the wires while fixing the opal glass. Insert the opal glass into the luminaire housing with sliding bolt glass closure and turn the glass clockwise up to the stop. Place glass in the luminaire housing and observe that the holding spring bolts fit into the notches of the glass. Turn the glass clockwise until it is locked. Thus, you reach a safe and vibration-resistant holding of the glass. To release the glass from the luminaire housing, turn it counterclockwise.
Replacement of the LED module · Maintenance
The designation of the LED module is noted on a label in the luminaire. The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools. Disconnect the system. Unscrew the glass from the luminaire housing by turning it counterclockwise. Clean glass and luminaire regularly with solvent-free cleansers from dirt. Please follow the installation instructions for the LED module. Screw in the glass by turning it clockwise as far as it will go. A broken glass must be replaced.
Spares