BEGA 50912.6 LED Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50912.6 LED Wall Luminaire
Product Information
Product Usage Instructions
Instructions for use
Product description
Overvoltage protection
Installation
Cleaning · Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50912.6 LED Wall Luminaire

Product Information

Product Description: Wall luminaire STUDIO LINE
Aluminium luminaire housing: Finish Colour velvet black inside hue matt copper
Synthetic cover: Translucent white
Distance apart: 190 mm
Cable entry: 1 for through-wiring
Mains cable connection terminal: 2.5@
Earth conductor connection: Yes
2-pole connecting terminal for digital control LED power supply unit: 220-240 V x 0/50-60 Hz DC 196-250 V
DALI-controllable: Yes
Basic insulation: Provided between the mains
Temporary thermal regulation: To protect temperature-sensitive components without switching off the luminaire
Energy efficiency class(es): D

Product Usage Instructions

1. The installation and operation of this luminaire are subject to national safety regulations.

Installation and commissioning may only be carried out by a qualified electrician.
Avoid touching the light output opening of the LED directly during installation or relamping.
To install, remove the mounting plate with LED unit from its packaging.
Loosen the knurled screw (slotted) and remove…

(More instructions may follow, but they are cut off in the provided text)

Safety Note: The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage Protection: The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. For additional protection against transients, etc., it is recommended to use separate overvoltage protection components. These can be found on the website www.bega.com.

Module Information

Lamp Module connected wattage: 16 W
Luminaire connected wattage: 18 W
Rated temperature: Not specified
Ambient temperature: Not specified

Note: Some module information is incomplete or missing in the provided text.

LED Characteristics:

Module designation: LED-1174/930
Colour temperature: 3000 K
Colour rendering index (CRI): > 90
Module luminous flux: 2550 lm
Luminaire luminous flux: 504 lm
Luminaire luminous efficiency: 28 lm / W

Note: Some LED characteristics are incomplete or missing in the provided text.

Weight: 2.9 kg

For more information, visit the website:www.bega.com

Instructions for use

BEGA-50912.6-LED-Wall-Luminaire-01

Application

Wall luminaire · Indoor luminaire with velvet black metal housing.
Luminaire with light source shielded to the front and metallic inside colour of the reflection surface.
Radial light emission 360°.

Product description

Wall luminaire “STUDIO LINE”
Aluminium luminaire housing, finish Colour velvet black inside hue matt copper Synthetic cover, translucent white
2 mounting holes ø 4.5mm
Distance apart 190mm
1 cable entry for through-wiring for mains cable
Connection terminal 2.5°
Earth conductor connection
2-pole connecting terminal for
digital control
LED power supply unit
220-240 V x 0/50-60 Hz
DC 196-250 V
DALI-controllable
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without
switching off the luminaire
Safety class I
– Conformity mark
Weight: 2.9 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability forndamage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 16 W
Luminaire connected wattage 18 W
Rated temperature ta=25 °C
Ambient temperature ta max=45 °C
50 912.6K3
Module designation LED-1174/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 2550 lm
Luminaire luminous flux 504 lm
Luminaire luminous efficiency 28 lm/W

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
Remove the mounting plate with LED unit from its packaging.
Loosen the knurled screw (slotted) and remove the ring made of synthetic material from the LED unit.
Pass the power connecting cable through the cable entry in the mounting plate.
Fasten the mounting plate with the supplied fastening material or other suitable fastening material to the installation surface.
Establish the earth conductor connection on the earthing screw ( ) of the mounting plate.
Make the electrical connection to the terminals.
Observe the correct configuration of the connecting cable. Connect the live conductor to the brown wire (L) and the neutral conductor to the blue wire (N).
The two connecting terminals marked DA, DA are provided for digital control purposes.
If these terminals are not assigned, the luminaire will work with full light output.
Insert the ring made of synthetic material back into the LED unit and tighten the knurled screw (slotted).
Unpack luminaire housing and carefully guide it over the LED unit.
Position and align the luminaire housing on the mounting plate and tighten the locking screw on the side.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacing the LED module ·

Replacing the power supply unit
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The replacement can be carried out by a qualified person using standard tools.
Disconnect the system from the power supply.
Loosen the locking screw on the side and lift the luminaire housing off the mounting plate.
Loosen the knurled screw (slotted) and remove the ring made of synthetic material from theLED unit.
Disconnect the earth conductor connection and the electrical connection to the terminal.
Loosen the mounting screws of the power supply unit, the round blank bracket and earthing screws (Torx).
Remove the pot with LED module. Install the replacement pot.
Please follow the installation instructions for the LED module.
Replace defective LED power supply unit.
Install in reverse order.