BEGA 635K3 Ceiling And Wall Iuminaire For Indoor Use Instructions

: June 12, 2024
: BEGA

Table of Contents

DIMENSIONS
Application
Product description
Safety
Overvoltage protection
Installation
- Replacement of the LED module
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**BEGA 635K3 Ceiling And Wall Iuminaire For Indoor Use Instructions

**

DIMENSIONS

Dimensions

Application

Ceiling and wall luminaire · indoor luminaire made of crystal glass, inside white and metal housing, for all lighting tasks in interior applications.

Product description

Luminaire made of painted metal housing, finish Colour white

Crystal glass, inside white

cable entry for mains supply cable The luminaire is suitable for through- wiring.

mounting holes ø 5.5mm Distance apart 200mm Connection terminal 2.5@ Earth conductor connection LED power supply unit 220-240 V x 0/50-60 HzDC 176-276 VBEGA Thermal Switch® Temporary thermal shutdown to protect temperature- sensitive components Safety class I Impact strength IK06 Protection against mechanical.

impacts < 1 joule

Safety mark
Conformity mark

Weight: 3.5 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com

Lamp

Module connected wattage: 11.6 W
Luminaire connected wattage: 13.6 W
Rated temperature: ta=25 °C
Ambient temperature: ta max=45 °C

78 635K3

Module designation: 4x LED-0293/930
Colour temperature: 3000 K
Colour rendering index: CRI > 90
Module luminous flux: 1880 lm
Luminaire luminous flux: 1153 lm
Luminaire luminous efficiency: 84,8 lm/W

Installation

LED are high-quality electronic components! Please avoid touching the light output openingof the LED directly during installation or relamping. Pass the mains supply cable through the luminaire housing.

Notice position of application »arrow down« when installed at the wall.

Fix luminaire housing with enclosed or any other suitable fixing material on to the mounting surface.

It is imperative to use the enclosed gaskets.

Make earth conductor connection. Push silicone sleeves over the lines and make electrical connection.

Spring closure

The spring closure provides a safe and vibration-resistant holding of the glass. Attach glass to luminaire housing and turn the glass clockwise until it is locked.

To release the glass from the luminaire housing, turn it counter-clockwise beyond the spring closure resistance.

Replacement of the LED module

Disconnect from main supply
Unscrew the glass by turning it counterclockwise beyond the spring closure resistance and take it off the luminaire housing. Clean glass and luminaire regularly with solvent-free cleansers from dirt. Disassemble LED module. Assemble LED replacement module. Note installation instructions of the LED module.

Attach glass to luminaire housing and turn the glass clockwise until it is locked. A broken glass must be replaced.

Spares