Inseego BPC100 Home and Business Phone Connect Instruction Manual
- June 12, 2024
- inseego
Table of Contents
Inseego BPC100 Home and Business Phone Connect
About your BPC100
The BPC100 is a wireless communication device that allows you to make calls and connect to the internet. It features multiple ports, antennas for signal enhancement, and a backup battery option.
Rear View
- Item 1 : External Antenna Connector 1
- Item 2 : Power Connector Port
- Item 3 : Ethernet Port
- Item 4 : Alarm Port
- Item 5 : Phone Port
- Item 6 : External Antenna Connector 2
Top View
- Item 1 : BPC Battery Cover
- Item 2 : AA Backup Batteries (3)
- Item 3 : Reset Button
Note: Do not insert USB devices into the power connector port as it may cause damage and void the warranty.
About your BPC100
Rear View
| No. | Item | No. | Item |
|---|---|---|---|
| 1 | External Antenna Connector 1 | 4 | Alarm Port |
| 2 | Power Connector Port | 5 | Phone Port |
| 3 | Ethernet Port | 6 | External Antenna Connector 2 |
Top View
| No. | Item |
|---|---|
| 1 | BPC Battery Cover |
| 2 | 3 AA Backup Batteries |
| 3 | Reset button |
Setting up your BPC100
Your BPC100 comes with the SIM card installed.
Step 1: Install backup batteries for use during power outage
- Open the battery cover.
- Insert three (3) AA batteries.
- Close the battery cover.
Step 2 : Install the antennas
To increase signal strength, you can install the two (2) antennas included.
- Align antennas with the antenna ports and screw securely into place.
- Restart the BPC100 after the antennas are inserted or removed.
Step 3: Install the power adapter
- Insert the power adapter into the power connector port.
- Plug the power adapter into a wall outlet.
Step 4: Connect your telephone to the BPC100
The BPC100 provides one port for the telephone.
-
Unplug telephone that you want to use with the BPC100 from the wall telephone jack.
Warning: If your existing phone has rotary or pulse dialing, it will not work with this product. -
Plug the end of your telephone cord into the PHONE port on the back of your BPC100 (the other end of the cord must remain plugged into the back of your telephone base unit).
-
For best results, place on a firm, flat surface. If your BPC100 needs to be mounted on a wall, please use double-sided mounting tape.
Step 5: Turn on your BPC100
- Press the Power button on the front of the device to turn on the BPC100.
- The power indicator will be green when device is turned on.
Important
- Please make sure your BPC100 is located in an area of your business that receives a strong wireless signal.
Step 6: Make calls
- Before making a call, please listen for a dial tone on your telephone. If the indicator light on your BPC100 is blinking red, move the BPC100 to a location that receives a signal or try installing the optional antenna for greater signal strength.
- Place a call to start using the service.
Important
Customers may need to use the three-digit area code when dialing local and
long distance numbers. The BPC100 does not support fax machines.
Find more information
- For additional information and technical support, contact Inseego online support web page at https://www.inseego.com/support or by calling +1 541-685-9045 Option 2.
- Go to http://my.bpc100 for additional information on BPC100 settings and software updates.
- The BPC User Guide can be found at:https://www.inseego.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>