TVSurf 2AVK9 DR graphic processor Installation Guide
- June 5, 2024
- TVSurf
Table of Contents
- TVSurf 2AVK9 DR graphic processor
- Overview
- Important Instructions Before Use
- Package Contents
- Installation Steps:
- Power up your Remote
- Complete the on-screen setup
- Tips and Troubleshooting
- Technical Specifications
- FCC STATEMENT WARNING
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TVSurf 2AVK9 DR graphic processor
Overview
IMPORTANT SAFETY INFORMATION
Caution:
Do not use the device if there is obvious damage
Warning:
Choking hazard. This device is not a toy. Keep away from children.
Important Instructions Before Use
- The device should only be used for the intended purpose as outlined in the instructions
- Do not expose the device to moisture or extreme heat
- Do not submerge the device underwater. Do not expose to liquid, smoke, or steam.
- Put the cap back on HDMI connector when not in use to avoid damage
Package Contents
- Remote x 1
- TVSurf 4K Stick x 1
- IR receiver cable x 1
- HDMI extender cable x 1
- Micro USB cable x 1
- Power adapter x 1
- User manual x 1
Installation Steps:
- Connect one end of the micro-USB cable to your TVSurf 4K Stick and the other end to the power adapter
- Plug the jack of the IR receiver cable into TVSurf and place the IR sensor in the line of sight of your remote to point to
- Plug your TVSurf 4K Stick into the HDMI port on your TV, then plug the power adapter into a nearby outlet
- Turn on your, then select the appropriate HDMI input
- For 4K streaming, connect the TV Stick to an HDMI HDCP 2.2 port on your 4K TV
Use the included HDMI extender to improve Wi-Fi and remote performance, Or if you have trouble fitting your TVSurf Stick 4K into an HDMI port on your TV.
Power up your Remote
- Open the back of the remote and insert 2 AAA batteries ( not included in the package)
- Follow the on-screen instructions to control the power and volume of your TV
Complete the on-screen setup
Using your Remote, follow the on-screen instructions
- Choose your language from the list
- Select your Wi-Fi network from the networks displayed on the screen
Note:
If your WiFi network is password-protected, have your WiF1 network password
handy to connect your TVSurf 4K Stick to the internet. If your network is
hidden, select the “Join Other Network” title from the list. If required,
enter your network password using the on-screen keyboard.
Tips and Troubleshooting
WiFi
- Use the 5GHz band on your wireless route if available lo the best wifi performance
- If you see a lock icon, your WiFi network requires a password, so make sure you have it available
- Ensure your Internet is working properly. Restarting your router and modem will solve most WiFi issues
- Do not place your wireless router or TVSurf 4K Stick in a cabinet. as it may impact WiFi signal strength
- Some WiFi issues may be improved by connecting the included HDMI extender
TVSurf Android or iOS App
Scan the below OR Code to download the app
Technical Specifications
Memory | 2GB |
---|---|
Flash | 16GB |
WiFi | IEEE 802.11 |
Bluetooth | N/A |
HDMI | 2.1, Support HDMI CEC, Dynamic HDR and HDCP 2.2,4Kx2K@75 max resolution |
output
| 3.0
Micro USS|
SD Card| Up to 256GB
Power| DC 5V/2A
| 94 x 34×13mm (without cap)
100 x 34 x 13mm (with cap)
The device complies with the European Directives 2014/30 EU At the end of its service life, this product may not be disposed of in the normal household waste, but rather must be disposed of at a collection point for recycling electrical and electronic devices The materials are recyclable according to their labeling. You make an important contribution to protecting administration where the appropriate disposal facility is located Subject to change
FCC STATEMENT WARNING
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is
applicable to only mobile configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least
20cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.