BEGA 12210.5 LED Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
Wall luminaire for indoor use
12 210.5
Instructions for use
Application
Enclosed and free-radiating wall luminaire made of hand-blown opal glass, with metal housing, for all lighting tasks in interior applications.
Product description
Metal luminaire housing, finish Colour velvet black Hand-blown opal glass
Metal shield, finish colour velvet black 2 mounting holes ø 4.5 mm Distance
apart 250 mm 2 cable entries for through-wiring for connection cable up to ø
10,5 mm max. 5 x 1.5@ Connection terminal 2.5@ Earth conductor connection
2-pole connecting terminal for digital control BEGA Ultimate Driver ® LED
power supply unit 220-240 V /50-60 Hz DC 176-276 V DALI-controllable Basic
insulation is provided between the mains and control cables BEGA Thermal
Control ® Temporary thermal regulation to protect temperature-sensitive
components without switching off the luminaire Safety class I
– Safety mark
– Conformity mark
Weight: 1.1 kg
This product contains light sources of energy efficiency class(es) D
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
Installation and commissioning may only be carried out by a qualified
electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation.
If subsequent modifications are made to the luminaire, the person responsible
for these modifications shall be considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we
recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.
Lamp
| Module connected wattage | 16.4 W |
|---|---|
| Luminaire connected wattage | 19 W |
| Rated temperature | ta = 25 °C |
| Ambient temperature | ta max = 45 °C |
12 210.5 K3
| Module designation | LED-0594/930 |
|---|---|
| Colour temperature | 3000 K |
| Colour rendering index | CRI > 90 |
| Module luminous flux | 2415 lm |
| Luminaire luminous flux | 1335 lm |
| Luminaire luminous efficiency | 70,3 lm / W |
Installation
LED are high-quality electronic components! Please avoid touching the light
output opening of the LED directly during installation or relamping.
Lead the mains supply cable through the cable entry into the luminaire
housing.
Fix the mounting plate with enclosed or any other suitable fixing material
onto the mounting surface.
Be sure to use the gasket rings supplied.
Establish earth conductor connection and make the electrical connection to the
terminals.
For digital control please use the connecting terminal DA, DA.
In case this terminal is not used the luminaire will be operated at full light
output.
Insert the glass into luminaire housing and fix it by screwing the shield
hand-tight clockwise onto the glass.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.
Defective glass must be replaced.
Replacement of the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to
those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Defective glass must be replaced.
Close the luminaire.
Spares
| Spare glass | 11 003 167 .1 |
|---|---|
| LED power supply unit | DEV-0312/700 |
| LED module 3000 K | LED-0594/930 |
| Shield | 72 000 896 M1 |
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>