BEGA 51150.2 Indoor Table Lamp Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 51150.2 Indoor Table Lamp
Product Information
Specifications
Installation
Spares
DIMENSION
Instructions for use
Product Description
Cleaning · Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 51150.2 Indoor Table Lamp

Product Information

The product is a luminaire that requires installation and operation according to national safety regulations. The manufacturer is not liable for damage caused by improper use or installation. The luminaire is equipped with electronic components that are protected against overvoltage in accordance with DIN EN61547. For additional protection against transients, it is recommended to use separate overvoltage protection components.

Specifications

Lamp Module connected wattage: 8.5 W
Luminaire connected wattage: 10 W
Rated temperature: ta = 25°C
Ambient temperature: ta max = 50°C
Module designation: LED-0581/930
Colour temperature: 3000 K
Colour rendering index (CRI): > 90
Module luminous flux: 1200 lm
Luminaire luminous flux: 755 lm
Luminaire luminous efficiency: 75.5 lm / W

Installation

Avoid touching the light output opening of the LED directly during installation or relamping.
Set the desired beam direction by tilting the luminaire.
To replace the LED module, disconnect the electrical installation, open the luminaire, follow the installation instructions for the LED module, and then close the luminaire.
Optional wooden bases in three surfaces (natural oak, ash black, and ash white) are available as accessories and must be ordered separately.

Spares

LED power supply unit: DEV-0402/250
Connecting cable with dimmer: 62 001 185
LED module 3000 K: LED-0581/930
Glass/Trim ring: 75 003 683
Reflector: 75 003 689

DIMENSION

BEGA-51150-2-Indoor-Table-Lamp-fig-1

Instructions for use

Application
Table lamp · indoor luminaire with wide beam light distribution. Luminaire for positioning on a wooden base for a variety of lighting situations with adjustable light. Wooden base optionally available in three different colour versions, as listed below.

Product Description

Table lamp »STUDIO LINE«
Cast aluminum luminaire housing, finish Colour velvet black, inside hue aluminum matt
Trim ring · Chrome finish
Clear safety glass
Light-diffusing silicone lens
Reflector made of pure anodized aluminum
Cable dimmer (touch-controlled dimmer) for infinite light adjustment
Black cable · 2,5m, with safety plug
LED power supply unit 220-240 V y 50-60 Hz
Safety class I
- c – Conformity mark
Weight: 1.2 kg

This product contains light sources of energy efficiency class(es) E
Safety
The installation and operation of this luminaire are subject to national safety regulations. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Lamp

Module connected wattage 8.5 W
Luminaire connected wattage 10 W
Rated temperature ta=25 °C
Ambient temperature ta max=50 °C

51 150.2K3

Module designation LED-0581/930
Color temperature 3000 K
Color rendering index CRI > 90
Module luminous flux 1200 lm
Luminaire luminous flux 755 lm
Luminaire luminous efficiency 75,5 lm/W

Installation
LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. For precise positioning of the reflector and cover ring, it is advisable to lift the luminaire at the connecting cable. The opening of the luminaire housing points downwards. Screw the enclosed trim ring with the attached reflector into the luminaire housing by turning it clockwise. Position the luminaire on a separate wooden base. Insert the connecting cable into the groove of the wooden base. For this purpose, wooden bases in three different surfaces are available – accessories 13 318, 13 319 and 13 320. Connect luminaire to mains supply (230 V). Press the sensing device gently to turn the luminaire on or off. Holding the sensing device enables to adjust the light intensity infinitely. Set the desired beam direction by tilting the luminaire.

Cleaning · Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the electrical installation.
Open the luminaire.
Please follow the installation instructions for the LED module.
Close the luminaire.

Accessory · Wooden bases
For this luminaire wooden bases in 3 surfaces are optionally available. Wooden bases are accessories and must be ordered separately

Part. No