BEGA 50 415.1 Ceiling mounted downlight for indoor use Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 50 415.1 Ceiling mounted downlight for indoor use Instruction Manual
Instructions for use
Application
Compact downlight · indoor luminaire with asymmetrical wide beam light
distribution.
Product description
- Die-cast aluminium and aluminium housing, finish Colour white
- Safety glass with optical structure
- Silicone gasket
- Reflector surface made of pure aluminium 2 mounting holes ø 4.8mm
- Distance apart 105mm 2 cable entries for through-wiring of mains supply cable ø 7-10.5mm, max. 5G1.5@
- Connection terminal 2.5@
- Earth conductor connection 2-pole connecting terminal for digital control
- BEGA Ultimate Driver®
- LED power supply unit 220-240 V x 0/50-60 Hz
- DC 176-276 V
- DALI-controllable
- Basic insulation is provided between the mains and control cables
- BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
- Safety class I
- Protection class IP 65
- Dust-tight and protection against water jets
- Impact strength IK07
- Protection against mechanical impacts < 2 joule
- Safety mark
- Conformity mark
- Weight: 1.6 kg
This product contains light sources of energy efficiency class(es) D
Safety
The installation and operation of this luminaireare subject to national safety
regulations. Installation and commissioning may only be carried out by a
qualified electrician. The manufacturer accepts no liability for damage caused
by improper use or installation. If subsequent modifications are made to the
luminaire, the person responsible for these modifications shall be considered
the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.
Lamp
Module connected wattage 17.5 W
Luminaire connected wattage 19.7 W
Rated temperature ta=25 °C
Ambient temperature ta max=35 °C
50 415.1K3
Module designation LED-0586/930
Colour temperature 3000 K
Colour rendering index CRI >90
Module luminous flux 2590 lm
Luminaire luminous flux 1586 lm
Luminaire luminous efficiency 80,5 lm/W
50 415.1K4
Module designation LED-0586/940
Colour temperature 4000 K
Colour rendering index CRI >90
Module luminous flux 2695 lm
Luminaire luminous flux 1651 lm
Luminaire luminous efficiency 83,8 lm/W
Lighting technology
Half beam angle 44/48
Installation
Undo the screws and lift off the luminaire top. LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Lead the mains supply cable through the cable entry into the luminaire back housing. Ensure correct directionality towards the area to be illuminated. Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface. Be sure to use the gasket rings supplied. Make earth conductor connection. Push silicone sleeves over the lines and make electrical connection. For digital control please use the connecting terminal DA, DA. In case this terminal is not used the luminaire will be operated at full light output. Make earth conductor connection between luminaire top and luminaire base. Push plug into coupler as far as it will go. Install the luminaire top, press-on and tighten screws evenly.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire. The
light colour and light output of BEGA replacement modules correspond to those
of the modules originally fitted. The module can be replaced by qualified
persons using standard tools. Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module. Inspect and,
if necessary, replace the luminaire gaskets. Defective glass must be replaced.
Close the luminaire.
Spares
LED power supply unit DEV-0312/500
LED module 3000 K LED-0586/930
LED module 4000 K LED-0586/940
Reflector 76 001 549
Gasket 83 001 571
BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden ·
info@bega.com
www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>