BEGA 50925.1 LED Ceiling Luminaire Downlight Instruction Manual
- October 30, 2023
- BEGA
Table of Contents
BEGA 50925.1 LED Ceiling Luminaire Downlight Instruction Manua
Bega
Deckenleuchte · Tiefstrahler für die Verwendung im Innenbereich
Ceiling luminaire · downlight for indoor use
Plafonnier · spot pour utilisation à l’intérieur
Instructions for use
Application
Ceiling luminaire downlight · indoor luminaire with symmetrical wide beam light distribution. BEGA Hybrid Optics® : Highly efficient and low- loss light distribution, thanks to reflector and optical lens.
Product description
Ceiling luminaire downlight »GENIUS« Die-cast aluminium housing,
Colour velvet white finish Trim ring · Chrome finish Clear safety glass
Optical silicone lens · BEGA Hybrid Optics® Reflector surface made of pure aluminium 2 mounting holes ø 4.5 mm
Distance apart 66 mm Connecting terminals 2.5@ Earth conductor connection BEGA Ultimate Driver®
LED power supply unit 220-240 V x 0/50-60 Hz DC 176-264 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components Safety class I
Impact strength IK08 Protection against mechanical impacts < 5 joule
c – Conformity mark
Weight: 0.55 kg
This product contains light sources of energy
efficiency class(es) E
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
Installation and commissioning may only be
carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation.If subsequent modifications are made to the luminaire, the person
responsible for these modifications shall be considered the manufactur
Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against
e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at
Lamp
Module connected wattage 3.9 W
Luminaire connected wattage 5 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 50 °C 50 925.1 K3
Module designation LED-1029/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 525 lm
Luminaire luminous flux 434 lm Luminaire luminous
efficiency 86,8 lm / W
Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against
e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at
Lamp
Module connected wattage 3.9 W
Luminaire connected wattage 5 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 50 ° 50 925.1 K3
Module designation LED-1029/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 525 lm
Luminaire luminous flux 434 lm Luminaire luminous
efficiency 86,8 lm / W
Light technique
Symmetrical wide beam light distribution
Half beam angle 27°
Installation
LED are high-quality electronic components! Please avoid touching the light
output opening of the LED directly during installation or relamping. Remove
mounting plate from the luminaire housing.
Unplug the earth conductor connection (plug contact).
Please note:
If the luminaire is to be mounted onto a metallic, electroconductive surface,
it is mandatory to make sure that the
mounting surface is connected conductive to the earth conductor of the
luminaire!
Lead the power connecting cable through the mounting plate.
Fix the mounting plate with enclosed or any other suitable fixing material
onto the mounting surface.
Establish the earth conductor connection on the earthing screw (1) of the
mounting plate. Establish the earth conductorconnection to the luminaire
housing (plug contact).
Push silicone hoses over connecting wires and make the electrical connection
at the terminal marked (L) and (N).
IMPORTANT:
To ensure secure connection, the luminaire housing must be positioned
precisely in relation to the mounting plate.
Make sure that the vertical bar inside the luminaire housing is positioned
precisely in the area of the mounting hole on the long bar of the mounting
plate.
Press the luminaire housing firmly against the mounting plate and turn it
clockwise firmly against the stop.
Screw enclosed trim ring with attached reflector into the luminaire housing by turning it clockwise.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to
those of the modules originally fitted. The module can be replaced by
qualified persons using standard tools.
Disconnect the electrical installation. Open the luminaire.
Please follow the installation instructions for the LED module.
Close the luminaire.
Spares __
LED power supply unit DEV-0303/350
LED module 3000 K LED-1029/930
Glass/Trim ring 75 004 418
Reflector unit 75 004 444