MEEC TOOLS 024340 Timber Jig for Chain Saw Instruction Manual

MEEC TOOLS 024340 Timber Jig for Chain Saw

Product Information

• Product Name: Timber Jig for Chain Saw
• Manufacturer: Jula AB
• Product Weight: 6 kg
• Dimensions: Width 74 cm, Height 62 cm, Depth 32 cm

Technical Data:

• Capacity in Wood: 12-24 inches (30-60 cm)
• Splitting Diameter: Not specified
• Bar Length: Not specified

Product Usage Instructions

1. Read the safety instructions carefully before assembly and use to avoid the risk of serious personal injury.
2. Put 2 screws M8 x 75 through the adjusting strut and into the clamp. Make sure the scale on the adjusting strut is turned away when fitting. Screw on the nuts below the clamp. Do not overtighten, leaving space for the saw bar.
3. Put 2 screws M8 x 75 through the adjusting strut, through the bar tip guard, and through the clamp. Fit hex screws in the nuts below the clamp. Do not overtighten, leaving space for the saw bar.
4. Repeat step 3 at the other end, but do not overtighten the nut as in step 3 and step 4.

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.

SAFETY INSTRUCTIONS

Read these instructions carefully before assembly and use. Failure to follow all the instructions and safety instructions can result in a risk of serious personal injury

SYMBOLS

Read the instructions.

TECHNICAL DATA

• Capacity in wood: 0.5-30 cm
• Splitting diameter: Ø53 cm
• Bar length: 12-24″ (30-60 cm)
• Size: W74 x H62 x D32 cm
• Weight: 6 kg

DESCRIPTION

Converts the chain saw to a one-man sawmill to turn logs into planks with a thickness of 0.5-30 cm. Works for logs up to Ø53 cm and fits chain saws with a bar length from 12” (30 cm) – 24” (60 cm). The lightweight, but robust framework is made of aluminium and is easy to use. The jig has a chain saw holder for positioning the saw when in use, a support handle for stability, saw guard for personal safety, and a plank thickness gauge

ASSEMBLY

1. Put 2 screws M8 x 75 through the adjusting strut and into the clamp. Make sure the scale on the adjusting strut is turned away when fitting. Screw on the nuts below the clamp. Do not overtighten, so that there is space for the saw bar.
   FIG. 1:

2. Put 2 screws M8 x 75 through the adjusting strut, through the bar tip guard, and through the clamp. Fit hex screws in the nuts below the clamp. Do not overtighten, so that there is space for the saw bar
   FIG. 2:

3. Fit the adjusting strut for the chain saw end on the end piece with U-bolt, strut clamp, 2 flat washers, and connecting nuts
   FIG. 3:

4. Fasten the handle at the chain saw end in line with the end piece with ball headed screw and lock nut.
   FIG. 4:

5. Repeat in the tip end, but do not tighten the nut (as in step 3 and step 4).
   FIG. 5:

6. Fit the stay and handle on the guide stay for the power switch with on/off switch med carriage bolts, 2 lock washers and nuts and 1 connection nut. Fit the composite unit on the thickness rails with 2 screws, flat washers and nuts.
   FIG. 6:

7. Fit the end piece on the thickness rails with carriage bolts, 2 flat washers and hex nuts. Tighten the nuts with your fingers. Fit the other end piece on the thickness rails with carriage bolts, 2 flat washers and hex nuts. Tighten the nuts. Check that the end pieces are in line with the thickness rails.
   FIG. 7:

Documents / Resources

| MEEC TOOLS 024340 Timber Jig for Chain Saw [pdf] Instruction Manual
024340, 024340 Timber Jig for Chain Saw, Timber Jig for Chain Saw, 024340 Timber Jig, Timber Jig, Jig
---|---

References

• Jula – products for home and garden

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>