TESLA HS500GF Pro Flex Cordless Vacuum Cleaner User Manual

TESLA HS500GF Pro Flex Cordless Vacuum Cleaner User Manual

IMPORTANT WARNINGS

PLEASE READ THE SAFETY INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.

Safety instructions :

• The battery must be removed safely.

• Do not use near stairs or on the balconies. This machine does not have a no avoidance sensors.

• This unit can be used by children from 8 years old and people with physical, sensory or mental skills or lack of experience and knowledge provided they have been placed under supervision or have received instructions for using the machine safely and that they understand the dangers. Children should not play with the appliance. The cleaning and maintenance by the user should not be made by children without supervision.

• This device is intended for domestic use only.This unit is suitable for low to medium felt back carpets. It is not suitable for uneven floors or mixed carpets.

• Remove side brush at the under-carpet cleaning to protect the side brush.

• If the adapter’s power cord is damaged, the adapter must be discarded.

• Recharge / battery / s only with the charger supplied by the manufacturer

• Use the device with the battery(S) specifically created (S) for this purpose. The use of any (S) other (S) battery (S) could cause an explosion or fire

• Please use an adapter to use this product only.

• Do not use on wet or greasy dust.

• Before use, keep fragile items (glass, light, etc.) and other objects that could entangle the brushes (long hair, plastic bags, rope, wire, etc.).
  Do not sit on the machine and do not put heavy things on it.

• WARNING: Make sure the unit can function freely in the room (it is not blocked by an obstacle, it cannot fall over) and that there is no obstacle on which the device may tip and create a risk of danger (such as lighted candles or a vase filled with water).

• Regularly clean the machine.

• Empty the dust container.

• Load the machine without using it for three months.

• Recharge only in the situation of a low power alarm or when the power is turned off. Use it after fully charged.

• The battery must be removed from the apparatus prior to its disposal; the device must be disconnected from the mains when removing the battery;

• Do not dispose of batteries with household waste. Eliminate them in accordance with local regulations.

• Recharge the battery / the robot only with the adapter provided witn the device.

• The cable of this adapter external flexible cannot be replaced; in case of damage to the cord, it is necessary to put the adapter discarded and replaced by an adapter of the same model.

• The appliance must be disconnected from the supply mains when removing the battery.

• This appliance contains battery that are replaceable.

• WARNING: For the purposes of recharging the battery, only use the definable supply unit provided with this appliance.
  Detachable supply unit

• WARNING: Risk of entrapment hazard. Keep loose clothing, hair, finger, etc. away from the motorized brushes and nozzles.

• WARNING: the plug must be removed from the socket-outlet before cleaning or maintaining the appliance.

IMPORTANT

It is forbidden to replace the power cable by yourself if damage.

If the device is dropped, please ask a qualified person to check it before using it again. Internal damage could cause accidents.
For any kind of problems or repairs, please contact the customer service of the local distributor, manufacturer or a qualified person to avoid danger.

DESCRIPTION OF THE DEVICE

Product overview

Engine block

Electric brush

Dust sensor

Power change indicator:
This is an option when “AUTO MODE” is on to see the power level change.

Rotary brush lock indicator:
Indicator indicates that the motor brush in the pedal is blocked or not working. Recommendation to release the brush for normal operation or clean it.

Automatic mode switch:
With this switch you can turn “AUTO MODE” on or off. Vacuum cleaner operation. In “Auto Mode” it means that the vacuum cleaner works at one strength of suction power and when it draws in a large amount of dust and it passes over the sensor, it detects that dust and increases the suction power while the sensor detects that there is no more dust and returns to the previous strength of suction power.

Auto mode indicator:
This is an indicator that the “AUTO MODE” cleaning mode is on/off.

Dust sensor indicator:
When the indicator turns on more than half of the lights, it is necessary to clean the upper HEPA filter. Ignoring the led indicator can lead to side effects: clogged Hepa filter, weakening of the suction power, destruction of the engine.

Engine lock indicator:
This is an indicator when the air supply is blocked, the air flow to the engine is obstructed or interrupted on the path of the floor brush, pipe, dust container, metal filter, TOP HEPA filter, Back HEPA filter).

Manual switch:
These switches (+, – ) are used to adjust the suction power, there are five power levels.

PACKAGING CONTENTS

• Main body
  

• Electric brush
  

• 2in1 dusting brush

• Crevice tool
  

• Charging deck
  

• Charger
  

• Long aluminium tube with flexible hose
  

Due to the continuous improvement of the product, the above configuration will vary according to the model. We reserve this right. The right to explain is owned by the company

INSTRUCTIONS FOR USE

Installation instructions tor aluminum tubes

• Push the end of the aluminum tube horizontally into the vacuum hole of the main machine to ensure that it is compact and not loosened, and that the installation is successful after the sound of clacking is heard. (figure 1
  

• To remove the aluminum tube, hold the main body with one hand and pull it out with the other hand pressing the button. (figure 2)
  
  

The electric brush installation instructions

• Push one end of the round brush mouth into the tube end of the air outlet to ensure it is tight and not loose; if the sound is heard, it is installed successfully (Figure 3).
  

• If you want to remove the brush, the brush is held in one hand, and the button is pressed by the other hand simultaneously, and the brush will be pulled out. (Figure 4)
  

• Electric brush can also use the method of aluminum tube connection, and directly be installed on the host.

Accesories

Instructions for using the accessories
In addition to using the aluminium tube and the electric brush, you can use a 2- in-1 brush and the long nozzle to adapt the product to all situations (Fig. 5):

The accessories can be inserted in 2 different ways: directly at the end of the flexible tube (Mode 1) or at the end of the motor block (Mode 2).
Mode 1: Take the long nozzle attachment, insert it into the end of the aluminium tube until you hear a click that confirms installation. To remove it, pull directly on it. Take the 2 in 1 brush accessory and do the same manipulation: insert it into the end of the aluminium tube until  you hear a click that confirms installation. To remove it, pull directly on it. (Figure 6 and 7)

Mode 2: To insert the accessories directly to the engine block, repeat the operation (Figure 8 and 9).

Battery installation instructions

Install the battery into the machine in the direction of (Fig.10) and install it as (Fig.11) to ensure no loosening. If the sound is heard, it has been installed successfully

ATTENTION:
For long term use, keep the battery in a cool and dry place, and leave the battery in a semi-charged state. Please wrap the battery with non-conductive material to avoid direct contact with the battery which may cause damage to the battery.

Usage

1. Preparation
   Before use, please install the battery and check whether it is charged. If it is not, please charge it in time (refer to “charging the product”), it can be used after recharging. According to the cleaning area, the accessories can be chosen according to the demand. The company has been specially equipped with various accessories. According to the clean area, the use can be chosen according to the clean area. (refer to the “Operation Instructions Annex” for more details)

2. Starting work
   Press the “switch button”, touch the button, the machine will start to work, if you need to stop working, loosen the “switch button”. (Figure 12)
   

3. Product dumping ash
   After stopping the machine, tap the dust tray on the side of the dust-barrel (Fig. 13) Open the caver, dump the dust, and close the dust-barrel cover. (Fig. 14)
   
   

4. Disassemble the filter core
   Rotate and remove the dust tray, you have access to the stainless steel filter, turn it to remove it. Do the reverse to replace the stainless steel filter and the dust pan. (Fig. 15).
   
   

Remove the filter element in the direction indicated by the arrow. (Fig. 16)

Product charging
Connect the charger directly to the vacuum cleaner or charging station (Figure 17) and the other end to a wall outlet in your home. (Figure 18)

About charging indicator
In operation: the light is illuminated continuously. Partially charged: LED flashes.
Fully charged: the light is illuminated continuously

NOTE

• After the product leaves the factory every 3 months (in the case of conditions), please use our special charger to charge the battery for 3 hours (do not need to be fully charged).
• Do not charge the battery for a long time, if you are still charging beyond normal charging time, please stop immediately, otherwise there may be risks such as battery heating, deformation or burning.
• When the battery is not in service for a long time or when it is in deep discharge, it may decrease in the first few times. It is recommended to discharge fully after charging (usually more than 6 hours). It is only need to repeat the action twice.

CLEANING AND MAINTENANCE

In order not to affect the performance of the machine, it is recommended that you maintain its components on a regular basis.
Before cleaning the main body (the engine block) (the holding section), make sure the machine stops working and the product is not in recharging.

Scrub with water or neutral detergent. Before scrubbing, ensure the cloth is dry. Do not infiltrate water into the internal parts of vacuum cleaners (Fig. 19) After cleaning, do not to put it under the direct sunlight or in wet place.

Cleaning dust barrel
Once the amount of dust reaches the “MAX” value, please clear it as soon as possible and do not overfill it. In order to make it easier to empty the dustbin, it is recommended that you remove the aluminum pipe or other accessories before cleaning.
After the machine is stopped, open the dust barrel cover and dump the dust. If any stubborn dirt is found in the inner wall of the dust barrel, please wipe it carefully with a wet rag.
After cleaning, close the dust barrel cover and make sure the lock button is in place

NOTE

After wiping the inner wall of the dust barrel with wet rag, it is necessary to be placed under the sun, and then cover the dust barrel after thoroughly drying.

Cleaning the outlet filter
In order to ensure the performance of the product, it is recommended that you regularly clean it and replace it after 3-6 months. (depending on the usage), press and hold down the dust barrel release button, remove the body and turn the cover, remove the sponge, and dust off the sponge filter. (see Fig. 16) If dust is accumulated too much, wash it thoroughly and dry it before loading it into the main body.

NOTICE!

During washing the sponge filter, use cold water and dry it thoroughly (usually in sunlight for 24 hours, then put it back into the body.

Cleaning brush
It is recommended that the brush be cleaned once after 4-5 times of operation with electric brush:

1. Turn off the power and remove the electric brush.
2. Flip the brush and turn the lock button on the fixed cover with a coin to open the lock. (Figure 20)
3. Remove the roller brush to fix the cover plate, lift one end of the roller brush and pull out the roller brush. (Figure 21)
4. Use a pair of scissors or other sharp instrument to remove tangled animal hair and other waste (Figure 22).
5. When the cleanup is complete, push one end of the rolling brush into the floor brush and then clip the other end into the floor brush. (Figure 23)
6. Cover the cover and lock it.
   

Sorting and storage

Charging   deck storage: easy to take, saving space. (Figure 24)

Accessory storage: easy to take, easy to collection. (Figure 25)

TROUBLESHOOTING **

**

Analysis and treatment of common faults.

contact our after-sales service for maintenance.
The motor operates with abnormal sound.| The main suction pipe or aluminum pipe is blocked.| Clear the obstacles inside the main suction pipe, aluminum pipe.
After excluding the above situation, the situation remains the same.| Please contact our after-sales service for maintenance
The product cannot be recharged.| The main computer and charger interface is not well connected.| Please check and connect it well.
After excluding the above situation, the situation remains the same.| Please contact our after-sales service for maintenance.

If above steps are not able to work properly with your device, please contact our after-sales service department for help.

TECHNICAL SPECIFICATIONS

| Technical parameter
---|---
Working voltage (V)| 25.2 V
Rated power (W)| 400 W
Battery capacity (mAh)| 2500 mAh
Dust barrel capacity (L)| 0.6 L
Once charging time (h)| Between 3 to 5 hours
Continuous operating time (min)| Up to 60 min
Product dimension (mm)| 369 x 125 x 227mm
Net weight (kg)| 2.65 kg

DISCLAIMER OF WARRANTY

The warranty does not cover the wear parts of the product, nor the problems or damage resulting from:

1. surface deterioration due to normal wear and tear of the product;
2. defects or deterioration due to contact with liquids and corrosion caused by rust or the presence of insects;
3. any incident, abuse, misuse, alteration, disassembly or unauthorized repair
4. improper maintenance, improper use concerning the product or connection to an incorrect voltage;
5. any use of accessories not supplied or not approved by the manufacturer.

The guarantee will be cancelled if the nameplate and / or serial number of the product are removed.

Disposal and environmental responsibility
In order to be environmentally friendly, we encourage you to have your device correctly. You can contact your local authorities or recycling centers for more information.

DISPOSAL

The presence of this logo on the product means that the disposal of the device is governed by Directive 2012/19 / EU dated July 4, 2012 relating to waste electrical and electronic equipment (WEEE).

Any hazardous substance contained in electrical or electronic equipment can have a potential impact on the environment and health during recycling. Consequently, at the end of the device’s useful life, it must not be disposed of with unsorted municipal waste.

Your role as an end consumer is essential in terms of reuse, recycling and obtaining other types of value creation from this product. You have the choice of different collection and exchange systems organized by local authorities (recycling centers) and distributors. It is your duty to use these possibilities.

IN THE END OF BATTERY LIFE

This appliance contains battery that are non-replaceable.
Used batteries must be supported by a selective collection system in order to be recycled thus reducing the impact on the environment.
When the battery reaches its end of life, you must place it in an appropriate selective collection system that will handle its destruction and / or recycling.

• If the battery acid has leaked, avoid contact with skin, eyes and mucous membranes! The liquid that leaks from the battery can cause rashes. If acid still had to contact with skin, immediately flush the affected areas with clean water and consult a doctor immediately.
• The batteries must be installed with the correct polarity +/-.
• Do not recharge non-rechargeable batteries because of the risk of explosion

MPORTANT
Under no circumstances should you dispose of the device or battery on the public highway.

Information for external power supplies for Commission Regulation 2019 /1782/EU

| Value
---|---
Input voltage| 100-240V
Input AC frequency| 50/60 Hz
Output voltage| 30V
Output current| 0.5A
Output power| 15W
Average active efficiency| >86.8%
Efficiency at low load (10 %)| >72%
No-load power consumption| 0.1 W

tesla.info

References

• Tesla.info | Technology for all

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>