APTIV FLR4P Advanced Radars User Manual

APTIV FLR4P Advanced Radars

Product Usage Instructions

Safety Precautions
Before using the product, please read and understand the following safety precautions:

• Do not make any changes or modifications to the device that are not expressly approved by the manufacturer, as it may void your authority to operate the equipment.
• This device complies with FCC RF Radiation exposure limits for an uncontrolled environment. To ensure compliance, the device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter.
• When installing and operating the equipment, maintain a separation distance of at least 20cm between the radiator and your body.

Installation

To install the product, please follow these steps:

1. Choose a suitable location for the device.
2. Ensure that there is at least a 20cm separation distance between the device’s antenna and your body.
3. Connect the necessary cables and power supply to the device.
4. Verify that all connections are secure.

Operation

To operate the product, please adhere to the following guidelines:

1. Power on the device using the designated power button.
2. Refer to the user manual for specific instructions on how to use the product features.
3. If you experience any issues or difficulties, consult the troubleshooting section of the user manual or contact customer support.

Maintenance

To ensure optimal performance and longevity of the product, please follow these maintenance guidelines:

• Regularly clean the device using a soft, dry cloth.
• Avoid exposing the device to extreme temperatures or moisture.
• Do not attempt to disassemble or repair the product yourself. Contact authorized service centers for any repairs or maintenance.

FAQs

What should I do if I cannot find the device label?

• If you cannot readily access the device label, please refer to the user manual for the FCC ID (L2CFLR4P) and include it in your manual for regulatory compliance.

What is the recommended separation distance between the device and my body?

• The device should be installed and operated with a normally maintained separation distance of at least 20cm between the radiator and your body to comply with FCC RF Radiation exposure limits.

What is the FCC ID for this device?

• The FCC ID for this device is L2CFLR4P.

What should be done if modifications are necessary?

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

What is the required separation distance between the radiator and the body?

• The equipment should be installed and operated with a normally maintained separation distance of at least 20cm between the radiator and your body.

Is it allowable to use this device with other antennas or transmitters?

• No, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

INSTRUCTION

The device under test is manufactured by the grantee (APTIV Services US LLC), and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, etc., the grantee must ensure the end-user has all applicable/appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user. APTIV Services US LLC will supply this document to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product.

INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
The following information (in blue) must be included in the end-product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user’s manual.

Compliance Specifications

Important Notices
Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Radiation Exposure Statement
This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a normally maintained separation distance of at least 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>