myCharge Portable Power Bank 3000 RFAM-0006 User Manual

myCharge Portable Power Bank 3000 RFAM-0006

OWNER’S MANUAL

Thanks for choosing myCharge

In The Box

• myCharge Portable Power Bank 3000
• USB to Micro-USB Charging Cable
• Owner’s Manual

Quick Start

1. Unfold the appropriate built-in connector from its storage position and connect it to the device you want to charge. You can also supply your own USB device cable and connect it to the full-size USB port.
2.  Move the function switch left into the on/charge position (green indicator) to begin charging. (Fig. 1)
3. When finished, move the function switch back into the off/sync position (red indicator) to prevent unnecessary discharging.

Charging Power Bank

Please fully charge your Power Bank before using the first time.
To charge, connect the included USB cable’s Micro-USB connector to Power Bank’s charging port (Fig. 2) and the other end to the USB wall adapter. When connected, the LEDs on the side of the unit will flash indicating that it is charging. Charge time for Power Bank alone is less than 3.5 hours from a standard 1A iPod®/ iPhone® USB wall adapter. Note: USB wall adapters not included.

Note: It is normal for Power Bank to be warm to the touch while in use.

Charging Devices

A Micro-USB, Mini-USB and Apple connector are built-in to let you charge hundreds of devices without the need for any additional adapters. To charge a device, connect it to the appropriate connector and move the move the function switch left into the on/ charge position (green indicator). Power Bank is capable of charging up to 3 devices at the same time.

When Power Bank’s internal battery is depleted beyond the ability to charge the connected devices, all LEDs will flash indicating it’s time to connect a power source. Use a standard USB iPod/iPhone wall adapter or one that came with your device rated for 1A output or more. The charge time of your Power Bank with devices attached will vary depending on the current charge level of those devices and its internal battery.

Overload Protection

Power Bank enables you to charge multiple devices. Because devices vary in their power requirements, it’s possible to connect a group of devices that need more than what Power Bank can supply. When this occurs, Power Bank will implements overload protection. LEDs will flash indicating which device cannot be charged because its power needs are too great:

• Left 2 LEDs flash – A device connected to the Micro or Mini USB connector
• Right 2 LEDs flash – A device connected to the Apple connector

In the event of an overload, unplug the last device connected. To  manually reset, disconnect all devices, move the function switch to the off/sync position and then back to on/charge before reconnecting devices in the priority order you prefer.

Syncing

Your iPhone or iPod can be synced to a computer while connected to Power Bank. Simply connect Power Bank to your computer with the provided USB cable, move the function switch to the off/sync position (right) and connect your device.

Note: Power Bank does not support sync through the built-in Micro-USB or Mini-USB connectors.

Battery Indication

To check how much battery is left, make sure the function switch is in the on/charge position (green indicator) and press the level check button on Power Bank’s side. (Fig. 1).

• LED 1 is lit – 00-17% Power
• LED 2 is lit – 17-34% Power
• LED 3 is lit – 34-50% Power
• LED 4 is lit – 50-67% Power
• LED 5 is lit – 67-84% Power
• LED 6 is lit – 84-100% Power

Hours Chart

| Talk| Standby| Browsing| Video| Audio/Music
---|---|---|---|---|---
iPhone 4|  +12hrs
(3G)|  +514hrs|  +17hrs (Wifi)
+10hrs (3G)|  +17hrs|  +69hrs
iPod touch| | | |  +18hrs|  +101hrs
Average
**Smartphone***|  +12hrs|  +514hrs|  +17hrs (Wifi)
+10hrs(3G)|  +17hrs|  +69hrs

*Average smartphone statistics are based on a 1400mAh battery

Maintenance

To keep your Power Bank operating at its full potential, please do the following:

1. Re-charge every three months when not in use.
2. Keep dry and away from moist and corrosive materials.
3. Do not immerse in water, air dry. To clean, wipe surface with damp cloth.

Product Specifications

Battery: 3000mAh Lithium Polymer
Input: 5VDC, 1.8A
Apple Connector Output: 5VDC, 1A
Mini-USB/Micro-USB Output: 5VDC, 1A combined

Troubleshooting

• My device is not charging or (The status indicator lights are not glowing): Confirm that your device is properly connected to the appropriate connector on Power Bank. Make sure the function switch for Power Bank is in the on/charge position (left with green indicator). Press the level check button to verify that Power Bank’s battery has a charge. If no status is shown, please connect Power Bank to a power source with the included USB cable.
• My device is not charging and Power Bank’s LEDs are flashing in pairs: Power Bank is in overload protection. Unplug the last device connected, noting that it may take some time for the lights to stop flashing. To manually reset, disconnect all devices, move the function switch to off/sync and then back to on/charge before reconnecting devices. If the overload occurs again, you may have a combination of devices that require too much power to connect simultaneously.
• My device is not charging and all Power Bank’s LEDs are flashing: Your Power Bank is out of power. Connect the included USB cable to Power Bank and the other end to a power source.
• My Apple device is not syncing: Confirm that your device is properly connected to the Apple connector. Confirm that the Power Bank is properly connected to your computer with the included USB cable. Make sure that the function switch is in the off/sync position (right with red indicator).

For additional troubleshooting tips, please visit us at www.mychargepower.com

Warnings

Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which myCharge is not responsible.

1. Do not store battery in high temperature environment, including intense sunlight or heat. Do not place battery in fire or other excessively hot environments.

2. Be cautious of excessive drops, bumps, abrasions or other impacts to this battery. If there is any damage to the battery such as dents, punctures, tears, deformities or corrosion, due to any cause, discontinue use and contact the manufacturer or dispose of it in an appropriate manner.

3. Do not disassemble the battery or attempt to repair or modify it in any manner.

4. Do not expose this battery to moisture or submerge it in liquid. Keep battery dry at all times.

5. Do not attempt to charge battery using any other method, apparatus, or connections other than the device’s USB connector. For directions on the various ways to charge your
   myCharge product please refer to the owner’s manual.

6. Do not attempt to replace any part of the battery.

7. If this battery is intended by the Purchaser to be used by a minor, purchasing adult agrees to provide detailed instructions and warnings to any minor prior to use. Failure to do so is the sole responsibility of the purchaser, who agrees to indemnify the Manufacturer for any unintended use or misuse by a minor.

8. All batteries have gone through a thorough quality assurance inspection. If you find that your battery is excessively hot, deformed, cut, emitting odor, experiencing or demonstrating an abnormal phenomenon, immediately stop all battery use and contact the manufacturer.

9. For extended storage, first charge your battery for one hour.

10. Never dispose of batteries in the garbage. This is unlawful under state and federal environmental laws and regulations. Always take used batteries to your local battery-recycling center.

Note: The Manufacturer is not responsible for any damages one may suffer as a result of use, intended or unintended, or misuse of this battery in conjunction with any device or accessory other than the appropriate entertainment device for which this battery is designed.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ONE YEAR LIMITED WARRANTY

RFA Brands sells its products with the intent that they are free of defects in manufacture and workmanship for one year from the date of original purchase, except as noted below. RFA Brands warrants that its products will be free of defects in material and workmanship under normal use and service. This warranty extends only to consumers and does not extend to Retailers.

To obtain warranty service on your myCharge product, mail the product and your dated sales receipt (as proof of purchase), postpaid, to the following address:

RFA Brands Service Center

Dept. 168
43155 West Nine Mile Suite 3
Novi, MI 48375
No COD’s will be accepted.

RFA Brands does not authorize anyone, including, but not limited to, Retailers, the subsequent consumer purchaser of the product from a Retailer or remote purchasers, to obligate RFA Brands in any way beyond the terms set forth herein. This warranty does not cover damage caused by misuse or abuse; accident; the attachment of any unauthorized accessory; alteration to the product; improper installation; unauthorized repairs or modifications; improper use of electrical/power supply; loss of power; dropped product; malfunction or damage of an operating part from failure to provide manufacturer’s recommended maintenance; transportation damage; theft; neglect; vandalism; or environmental conditions; loss of use during the period the product is at a repair facility or otherwise awaiting parts or repair; or any other conditions whatsoever that are beyond the control of RFA Brands.

This warranty is effective only if the product is purchased and operated in the country in which the product is purchased.

A product that requires modifications or adoption to enable it to operate in any other country than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications is not covered under this warranty.

THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF THE COMPANY WITH RESPECT TO PRODUCTS COVERED BY THIS WARRANTY. RFA BRANDS SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.

IN NO EVENT SHALL THIS WARRANTY REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND TO BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY. NO REFUNDS WILL BE GIVEN. IF REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT AVAILABLE, RFA BRANDS RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF REPAIR OR REPLACEMENT.

This warranty does not extend to the purchase of opened, used, repaired, repackaged and/ or resealed products, including but not limited to sale of such products on Internet auction sites and/ or sales of such products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately cease and terminate as to any products or parts thereof which are repaired, replaced, altered, or modified, without the prior express and written consent of RFA Brands.

This warranty provides you with specific legal rights. You may have additional rights, which may vary from state to state. Because of individual regulations, some of the above limitations and exclusions may not apply to you.

For more information regarding our product line in the USA, please visit: www.mychargepower.com 

For service or repair – do not return this unit to the retailer. Instead, contact:

RFA Brands Consumer Relations at 1-888-251-2026
Email: cservice@rfabrands.com
Mail To: RFA Brands Service Center
Dept. 168
43155 West Nine Mile Suite 3
Novi, MI 48375

© 2011 RFA Brands and its affiliated companies, all rights reserved. The myCharge name and logo are trademarks of RFA Brands and its affiliated companies. All rights reserved. Apple, iPod, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect to iPod, iPhone or iPad respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless performance.

DOWNLOAD

myCharge Portable Power Bank 3000 RFAM-0006 User Manual – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>