Eterna LINKCS4 Linkable LED Strip Lights Instruction Manual
- June 12, 2024
- Eterna
Table of Contents
Eterna LINKCS4 Linkable LED Strip Lights
Product Information
The product is a linkable LED strip light available in three models: LINKCS4, LINKCS9, and LINKCS13. It has a rated wattage of 4W, 9W, or 13W, depending on the model. The luminaire lumens with diffuser range from 380 lm to 390 lm, and the lumens from the chip array range from 425 lm to 437 lm. The useful lumens from the array range from 353 lm to 363 lm. The nominal lifetime of the lamp is 25,000 hours, and it has a color temperature of 3000K, 4200K, or 6500K. The number of switching cycles before premature lamp failure is 12,500, and the warm-up time up to 60% of the full light output is 0.5 seconds. The voltage/frequency is 220-240V~50Hz.
Product Usage Instructions
-
Check the pack and make sure you have all of the parts listed on the front of this booklet. If not, contact the outlet where you bought this product.
-
This product must be installed by a competent person in accordance with the current building and IEE wiring regulations.
-
As the buyer, installer and/or user of this product it is your own responsibility to ensure that this fitting is fit for the purpose for which you have intended it. Eterna Lighting cannot accept any liability for loss, damage or premature failure resulting from inappropriate use.
-
This product is designed and constructed according to the principles of the appropriate British Standard and is intended for normal domestic service. Using this fitting in any other environments may result in a shortened working life, for example where there is prolonged periods of use or higher than normal ambient temperatures such as lighting public or shared spaces or in nursing/care home facilities.
-
Switch off the mains before commencing installation and remove the appropriate circuit fuse or lock off MCB.
-
This light fitting is suitable for indoor use only.
-
This product is suitable for use in living areas only.
-
This product is designed for permanent connection to fixed wiring: this must be a suitable circuit
(protected with the appropriate MCB or fuse). -
This product is suitable for installation on surfaces with normal flammability e.g. wood, plasterboard and masonry. It is not suitable for use on highly flammable surfaces (e.g. polystyrene, textiles).
-
Before making fixing hole(s), check that there are no obstructions hidden beneath the mounting surface such as pipes or cables.
-
The chosen location of your new fitting should allow for the product to be securely mounted and safely connected to the mains supply (lighting circuit).
-
Do not attach to surfaces which are damp, freshly painted or otherwise electrically conductive (e.g. metallic surfaces).
-
When making connections ensure that the terminals are tightened securely and that no strands of wire protrude. Check that the terminals are tightened onto the bared conductors and not onto any insulation.
-
This product is double-insulated. DO NOT CONNECT ANY PART TO EARTH.
-
This product is not intended to be used by children and persons with sensory, physical and/or mental impairments that would prevent them from using it safely.
-
You are advised at every stage of your installation to double-check any electrical connections you have made. After you have completed your installation there are electrical tests that should be carried out, these tests are specified in the current IEE wiring and building regulations.
For more information on replacability and recycling, please visit the
manufacturer’s website: www.eterna-lighting.co.uk
If you have any technical inquiries or need assistance, you can contact Eterna
Lighting via email:
- Sales: sales@eterna-lighting.co.uk
- Technical Support : technical@eterna-lighting.co.uk
Please note that this product is made in China and contains a Light Source of Energy Efficiency Class F. It is not suitable for accent lighting.
Specifications
| LED LAMP SPECIFICATIONS: | 4W | 9W | 13W |
|---|
Luminaire lumens (with diffuser)
Warm White, Cool White, Daylight White| 3000K – 380 lm
4200K – 385 lm
6500K – 390 lm| 3000K – 896 lm
4200K – 901 lm
6500K – 905 lm| 3000K – 1264 lm
4200K – 1280 lm
6500K – 1295 lm
Lumens from chip (array)
Warm White, Cool White, Daylight White| 3000K – 425 lm
4200K – 431 lm
6500K – 437 lm| 3000K – 1009 lm
4200K – 1011 lm
6500K – 1013 lm| 3000K – 1386 lm
4200K – 1410 lm
6500K – 1434 lm
Useful lumens (array)| 3000K – 353 lm
4200K – 358 lm
6500K – 363 lm| 3000K – 833 lm
4200K – 837 lm
6500K – 841 lm| 3000K – 1175 lm
4200K – 1190 lm
6500K – 1204 lm
Rated Wattage| 4W| 9W| 13W
Rated luminous flux| 353/358/363 lm| 833/837/841 lm| 1175/1190/1204 lm
Nominal life time of the lamp| 25,000 hrs| 25,000 hrs| 25,000 hrs
Colour temperature| 3000/4200/6500K| 3000/4200/6500K| 3000/4200/6500K
Number of switching cycles before premature lamp failure| 12,500| 12,500|
12,500
Warm-up time up to 60% of the full light output| <2s| <2s| <2s
Dimmable| No| No| No
Nominal beam angle| 130°| 130°| 130°
Rated power| 4W| 9W| 13W
Rated lamp lifetime| 25,000 hrs| 25,000 hrs| 25,000 hrs
Displacement factor| >0.5| >0.5| >0.5
Lumen maintenance factor at end of nominal life| >0.958| >0.958| >0.958
Starting time| <0.5s| <0.5s| <0.5s
Colour rendering| >80| >80| >80
Colour consistency| Within 6 step Macadam ellipse| Within 6 step Macadam
ellipse| Within 6 step Macadam ellipse
Voltage / Frequency| 220-240V~50Hz| 220-240V~50Hz| 220-240V~50Hz
Lumen efficacy| 3000K – 95 lm / W
4200K – 96.25 lm / W
6500K – 97.5 lm / W| 3000K – 99.55 lm / W
4200K – 100.11 lm / W
6500K – 100.55 lm / W| 3000K – 97.23 lm / W
4200K – 98.46 lm / W
6500K – 99.61 lm / W
This product contains a Light Source of Energy Efficiency Class F
Not suitable for accent lighting
LAMP REPLACEMENT:
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
EVENTUALLY, YOU MAY WANT TO REPLACE THIS PRODUCT
Regulations require the recycling of Waste from Electrical and Electronic
Equipment (European “WEEE Directive” effective August 2005—UK WEEE Regulations
effective February 2014). Environment Agency Registered Producer:
WEE/GA0248QZ.
WHEN YOUR PRODUCT COMES TO THE END OF ITS LIFE OR YOU CHOOSE TO REPLACE IT,
PLEASE RECYCLE IT WHERE FACILITIES EXIST – DO NOT DISPOSE WITH HOUSEHOLD
WASTE.
CLEANING
- Clean this fitting only with a soft dry cloth.
- Do not use any chemical or abrasive cleaners.
IF YOU EXPERIENCE PROBLEMS
If you believe your product is defective, please return it to the point of
purchase. Our Technical Team will gladly advise on any Eterna Lighting
product, but may not be able to give specific instructions regarding
individual installations.
INSTALLATION
-
When positioning the fitting, make sure there is a gap of at least 5mm between the LED lamp area and any adjacent surface.
-
Using the fixing clips, mark off the fixing points on to the surface. If fixing to a shelf or under a cupboard, check the screw size required and screw into place. (See opposite for clip positions).
-
If fixing directly to the wall, drill holes using a suitable drill bit to a depth of 30mm and insert wall plugs (included).
-
Secure the fixing clips in place using appropriate screws (included).
-
Set the colour temperature to the desired option:
DL = 6500K / CW = 4200K / WW = 3000K -
Attach the fitting to the clips.
-
Connect the mains lead or link lead to the socket on your fitting.
-
Restore the power supply and switch on.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>