RIGHT WEIGH 201-EBT-21B Exterior Digital Scale Installation Guide
- June 3, 2024
- Right Weigh
Table of Contents
RIGHT WEIGH 201-EBT-21B Exterior Digital Scale Installation Guide
WHAT’S INCLUDED
-
1 x 201-217-31 – Gauge and mounting bracket
-
2 x 221-SK – Epoxy strain sensor installation kit
-
1 x 201-SK – Air line and electrical installation kit
SENSOR CONFIGURATION
The gauge should be set to detect 2 Spring Sensors. See Air/Spring
Suspension Gauge manual for more information on how to set the sensor
configuration.
APPLICATIONS
Straight Truck: Dual Spring Steer and Air Drive Suspension
Sensor Location:
Strain sensors “A” and “B” should be mounted on the top, center of each steer axle with sensor “A” being on the front axle. See the 221-SK installation manual for more information on how to install the strain sensors.
The air sensor should be connected directly to an air bag on the drive axle group. See the 201-SK installation manual for more information on how to install the air line connection.
Mode:
Set the gauge to Spring Average Air Average (SA AA) mode to see two separate weights for the steer axle group and the drive axle group.. See Air/Spring Suspension Gauge manual for information on how to set the mode.
Scan here to see additional resources on our website including full
installation manuals, quick set up guides, and video tutorials!
CONTACT US
Right Weigh, Inc.
888-818-2058
www.rwls.com
[email protected]
Follow Us!
Documents / Resources
|
RIGHT WEIGH 201-EBT-21B Exterior Digital
Scale
[pdf] Installation Guide
201-EBT-21B, Exterior Digital Scale, 201-EBT-21B Exterior Digital Scale,
Digital Scale, Scale
---|---