Moes WRS-USC-WH-MS Smart Curtain Switch Instruction Manual
- June 13, 2024
- MOES
Table of Contents
Instruction Manual
Smart Curtain Switch
Wi-Fi+RF
WRS-USC-WH-MS Smart Curtain Switch
https://drive.google.com/drive/folders/1UMOlVNgFYaNsgGpOHzRb35yund7qaL0x?usp=sharing
Product Description
This new designed glass panel wireless touch smart curtain switch is designed with many new updates. The WiFi+RF version easily replaces traditional switches with a variety of ways to control. Multi-control association is added into Tuya Smart Life App as a new feature to control with other smart switches, together with the backlight on/off and relay status when power off. Its scratch resistance glass panel is suitable for different decoration styles with its best value.
Transportation：
The products shall be free from severe vibration, impact, exposure to rain,
dumping and other problems during transportation, and shall comply with the
provisions of the marks on the packing boxes.
Safety Information：
- Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professional assistance from a qualified Electrician.
- Do not disassemble, reassemble, modify, or attempt to repair the product by yourself.
- This product has no waterproof and dustproof function.
Storage：
Products should be put in the warehouse where the temperature is between the
range -10℃ ~ +45℃,and the relative humidity ≤70%RH, indoor environment with no
acid, alkali, salt and corrosive, explosive gas, flammable matter, protected
from dust, rain and snow.
Technical Parameters:
Model: WS-USR-C / WS-EUR-C
Working Voltage: 90-250V AC, 50/60Hz
Max. Current: 2.5A/Gang; Total 2.5A
Load Power: ≤600W
Standby Power: ≤0.5W
Wireless Protocol: Wi-Fi 2.4GHz IEEE 802.11 b/g/n
Standby Consumption: 0.1mA
Wireless Range: 30 Meters(Indoor)
Warnings:
Turn off the power at the circuit breaker and test that power is off before
wiring.
Installation
Note:
- Make sure that the power at the circuit breaker is off before wiring.
- Neutral Wire is required.Confirm the wall box contains a Neutral Wire(typically white).If the wall box don’t have a Neutral Wire,please try another location at your home or call a professional electrician to install the switch.
- The wire colors indicated in this manual are the usual colors and may differ in some houses.
- Ensure the wire conductors are securely fastened to each wire.
- Ensure the Wi-Fi signal is steady and normally working before wiring.
- If you don’t have any wiring experience,please call a professional electrician.
Step 1
- Turn off the circuit breaker and use the electrical tester to test the power.
- Ensure the circuit breaker is off before wiring.
Attention:
Please disconnect the power supply before installing or removing the device
for avoiding irreversible damage on the device from the electric current or
some unpredictable problems such as lamp flashing.
Step 2
Remove the old switch
Step 3
- Remove the switch and pull it away from the wall.
Identify Line/Load Wire(Note:The color of your wire may be different from the color shown on the manual.)
Verify power is off
- We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit.
- You may need to turn off more than one circuit breaker.
Step 4
- Take pictures of the wiring
- Follow the wiring diagram to connect the switch wires to the wires in the wall box with the wire conductors.
Step 5
-
Open the switch panel from the bottom of the switch with a screwdriver
-
Mount the switch with the provided screws and snap the wall plate on it.
Step 6
Turn the power back on at the circuit breaker and then switch the light on.
Preparation For Use
-
Download MOES App on App store or scan the QR code
https://a.smart321.com/moeswz
MOES App is upgraded as much more compatibility than Tuya Smart/Smart Life App, functional well for scene controlled by Siri, widget and scene recommendations as the fully new customized service.
(Note: Tuya Smart/Smart Life App still works, but MOES App is highly recommended) -
Registration or Log in
• Download “MOES” Application.
• Enter the Register/Login interface; tap “Register” to create an account by entering your phone number to get verification code and “Set password”. Choose “Log in” if you already have a
• MOES account.
Steps for connecting the APP to the device
Method One:
- Make sure your phone is connected to Wi-Fi and Bluetooth.
- Scan the QR code to configure the network guide.
https://smartapp.tuya.com/s/p?p=xqvhthwkbmp3aghs&v=1.0
Method Two:
-
Make sure your phone is connected to Wi-Fi and Bluetooth.
-
Reset:Press the switch button for 6 times,and hold on the 6th time,then release until the blue indicator on the switch flashes fast.Pair/Reset is successful.
-
Open MOES App,then the prompt page will automatically show on the screen.Click “Add”, Select the device you want to add and click “+”.
-
Enter Wi-Fi Password and click “Next”,waiting for completing the connection.Add the device successfully, you can edit the name of the device to enter the device page by click “Done” .
-
enjoy your smart life with home automation.
How to pair/reset Wi-Fi
Press the switch button for 6 times,and hold on the 6th time,then release
until the blue indicator on the switch flashes fast.Pair/Reset is successful.
3.2 Remote radio frequency(RF)link method: Pair and clear up the RF code
-
How to pair the RF code
Press and hold the touch button until you hear “Di”(1 time), and press the button on the remote control switch.Then it would begin to enter the remote radio frequency(RF)pairing. -
How to clear up the RF code
Press the switch button for a long time until you hear “Di”(1 time), and then keep pressing the button until you hear “Di-Di-Di-Di”(4 times).The RF code is now cleared up.
Note:This operation can only clear one button,repeat the operations for clearing other codes.
FAQ
-
After the device is installed, why does the light not respond when I click the switch button?
A: Please cut off the power supply and check whether the connection is correct according to the instructions. -
Why is there no reset button on my switch?
A: Hello, generally speaking, the reset button of the switch device is the switch button itself. You can press the switch button to configure the APP according to the instructions.The power indicator light will start to blink when entering into successful pairing mode. -
What if my smart switch malfunctions and doesn’t respond for a long time?
A: Hello, please try to reset the device. Firstly remove the smart switch from your APP and re-configure the network for use.
Enter Smart Life Skill in Alexa APP
-
Complete product networking configuration in the App
Complete the device’s networking configuration according to the prompts in the App.
Note: In the App, change the name of the device to an easily identifiable name such as Alexa; names are usually in English, such as “bed light”. -
Configure the Amazon Echo device
(If you have already configured Amazon Echo, you can skip this step. The following instructions are based on the iOS client.)
Make sure you Amazon Echo device is powered on and connected to a Wi-Fi network.
Open the Alexa App on your phone. After successful login, tap on the menu in the upper left corner of the Home page, select “Settings” and tap “Set Up A New Device” to set up the Amazon Echo.
Choose your Amazon Echo device type and language for connecting. Press and hold the small dot on the device until the light turns yellow. Then tap “Continue” to connect to the hotspot.
After connecting to the Amazon Echo hotspot, return to the page. At this point, the connection is successful.
Tap “Continue” to proceed to the next step. Choose a Wi-Fi
network to connect to. Amazon Echo will take a few minutes to try to connect
to the network.
After the network connection is successful, tap “Continue”. An introduction video will appear. After the video ends, tap “Continue” to jump to the Alexa Home page. You have now completed the Amazon Echo’s configuration process. -
Key step —— Link Skill
Tap on “Skills” in the Alexa App menu.
Then search for “App Name”. Tap “Enable” to enable the Skill.
Enter the App account and password, then tap “Link Now” to link your App account to enable the Skill. Now you can start your smart home journey. -
Common commands
Control the device via voice commands, now you can control your smart device with Echo. You can control your device (such as your bedroom light) with the following commands:
Alexa, turn on/off bedroom light. (Turn on/off the light)
Alexa, set bedroom light to 50 percent. (Set the light to any brightness)
Alexa, brighten/dim bedroom light. (Increase/weaken the brightness of the light)
Alexa, set bedroom light to green. (Adjust the color of the light)
SERVICE
- During the free warranty period, if the product breaks down during normal use, we will offer free maintenance for the product.
- Natural disasters/man-made equipment failures, disassembly and repair without the permission of our company, no warranty card, products beyond the free warranty period, etc., are not within the scope of free warranty
- Any commitment (oral or written) made by the third party (including the dealer/service provider) to the user beyond the warranty scope shall be executed by the third party
- Please keep this warranty card to ensure your rights
- Our company may update or change the products without notice. Please refer to the official website for the updates.
RECYCLING INFORMATION
All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.
WARRANTY CARD
Product Information
Product Name____
Product Type_
Purchase date__
Warranty Period_
Dealer Information
Customer’s Name
Customer Phone__
Customer Address_____
Maintenance Records
| Failure date | Cause Of Issue | Fault Content | Principal |
|---|---|---|---|
Thank you for your support and purchase at we Moes, we are always here for
your complete satisfaction, just feel free to share your great shopping
experience with us.
If you have any other need, please do not hesitate to contact us first, we will
try to meet your demand.
FOLOW US
@moessmart
@moes_smart
MOES.Official
www.moes.net
@moes_smart
@moes_smart
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China
EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road Business
Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: [email protected]
Manufacturer:
WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation
Center, NO.238, Wei 11 Road, Yueqing Economic
Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: [email protected]