Eterna VECORDL12 LED Recessed Downlights Instruction Manual
- October 30, 2023
- Eterna
Table of Contents
Eterna VECORDL12 LED Recessed Downlights
Product Information
The LED Recessed Downlights are available in four different models: VECORDL6, VECORDL12, VECORDL18, and VECORDL24. These downlights are designed to provide energy-efficient lighting solutions for various indoor settings.
Disassembly
- Fitting must be removed from mains power
- Control Gear – LED Driver
- Remove both connection covers – lever with screwdriver
- Remove Mains cable by pressing terminal release tabs
- Remove LED output cable by pressing terminal release tabs
- New LED Driver with terminal covers removed
- Twist plug/socket anticlockwise to release LED Driver
- Remove Springs x2
- Remove fixing screws to take off Rear Cover
- Lift out and remove Reflector assembly
- Lift out and remove Light Guide Plate and Diffuser
- LED Tape can then be removed from Body Casting
- Unsolder Connector Lead from LED Tape
After disassembling the downlights, you can replace or repair any damaged components as needed. To reassemble, follow the disassembly steps in reverse order.
Component
- Driver: Various
- Plug Lead Assy: Various
- Spring: Stainless Steel
- Rear Cover: Steel
- Body: Aluminium Casting
- Reflector: Polycarbonate
- Light Guide: Polycarbonate
- Diffuser: Polycarbonate
Read User Manual Online (PDF format)
Loading......