THINKRIDER A1 Power Trainer User Manual
- June 4, 2024
- ThinkRider
Table of Contents
THINKRIDER A1 Power Trainer
Product introduction
- Construction: Steel triangle type
- Power accuracy: ±3%
- Wireless connection: ANT+(connect to PC), Bluetooth 4.0 (connect smartphones and tablets)
- Device system: IOS/Android/Windows
- Drive type: Direct drive
- Application: Cycling simulation
- Weight: About 15kg
- Simulated slope: Fixed 3%
- Maximum resistance power: About 1200watts
- Noise level: 58 db (@1.0m& 30KPH)
- Battery: CR 2032
Bicycle adaptation
- Rim size: Roadbike: 650c /700c, MTB: 24”/26”/29”
- Hub type: 130/135QR,12×142 and 12×148 thru axle (optional)
- Cassettes: Shimano/ SRAM 8,9,10,11 Speed
- Software adaptation: Powerful, Rouvy, Zwift, PerfPRO, ONE LAP, etc.
Product Composition
Note:
- Products and accessories may be changed due to different batches. Please refer to the actual products.
- Please keep the box and foam for future transportation and storage.
Trainer Installation
- Place the trainer on a level surface, and install two horizontal feet.
- Note that the length of the two feet is not the same, left and right directions can not be installed in the opposite direction. Refer to the top view below.
- There is a freehub on the cycling trainer, which supports the standard Shimano and SRAM 8-11 speed cassettes.
- Install your bike on the trainer, just like installing the rear wheel on the bike.
- The installation method of Q.R. /Thru Axle converters is shown below.
- Make sure your bike is LOCKED to the trainer, in case it comes loose and causes harm.
Caveat
- Do not let children and pets get close to the bike trainer.
- Please use the trainer on stable ground.
- Please consult your doctor before starting or modifying any exercise program.
- Do not touch the moving parts of the trainer with your hands or objects.
- The flywheel will generate high temperatures after using it for a long time.
- Do not touch it.
- Do not touch the flywheel or disassemble the bicycle while the flywheel is still rotating.
- Be careful when standing on the trainer.
- Keep the trainer away from fire, water, and other obstacles.
- It is strictly forbidden for people with heart or brain diseases and other users
- who are not suitable for high-intensity exercise to use the trainer.
- Users who are not responsible for their own behavior should not use the trainer
Special remind
- ThinkRider A1 is a direct-drive trainer of pure power meters. When you’re using all kinds of cycling software (Such as Zwift, Powerful App), on the connect device page, you need to select the connection “power meter” or “power equipment”, please don’t choose Smart trainer options.
- A1 trainer doesn’t need calibration.
- Trainer A1 firmware upgrade tool:
- For iPhone , download the app from the App Store: Thinkrider tools
- For Androids , please download the app from Google Play: Thinkrider tools
- If the belt skids, it should be tightened according to the videos. (The belt is a consumption item, it is recommended to replace it once a year.)
- Please pay attention when installing the horizontal bracket. There is a difference between front and back and left and right.
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Please add the personnel of customer service on WeChat for more technical support. The company reserves the right to interpret the above content. (Please refer to the relevant content of the WeChat official account of ThinkRider)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>