GT Band Smart Sports Watch User Manual
- June 7, 2024
- GT Band
Table of Contents
GT Band Manual
GT Band Smart Sports Watch
Bind Watch
- Download and install App You can set up the watch through the”VeryFit”app for iOS or Android devices. The steps are shown as follows:
Notes: The hardware platform of the equipment system shall meet requirements.| iOS 9.0 version or above
---|---
| Andriod 6.0 system or above
| Support Bluetooth 4.0
Correct operation: Scan the QR code below or download Very Fit APP through the
mobile APP store to pair with the watch.
Wrong
operation: Pair the watch directly with the bluetooth in your mobile phone’s
settings.
Note: Not for PC, Tablet or Samsung J3
Instruction for Use
-
Charging schematic The watch needs to be charged to activate when it is first used.
Make sure the metal contacts of the watch match well with the charging
dock, then the watch can be charge properly
Basic Operations
1.
Wear it correctly: make sure that the bottom sensor is properly attached to
the skin, and the strap shall be one finger away from the wrist.
2. Touch operation: the GT Band supports full-screen touch operations. Single click: select; long press: enter or confirm.
3. Touch key: the GT Band has a touch key. Short press: return or close a notification. -
Bind process
Please download VeryFit from App Store/Google Play or scanthe QR code above to download.
1. Open the VeryFit app on your smartphone, fill in your personal info and step goal.
2. Go to the “Device” page, tap “Add Device” and select “Bracelet”, then your smartphone starts searching devices.When “GT Band” appears, tap it to connect the tracker to your smartphone.
3. You can also use the VeryFit app to scan the QR code displayed on your tracker to connect it to your smartphone (Go to the “Device” page tap scan icon in the upper right corner of the page to scan the QR code on the tracker).
Notes:
1. During binding process, VeryFit will prompt you to enable GPS and Bluetooth, and authorize VeryFit to get access to the GPS on you mobile phone.
2. Apple phones need to click “pair”, then the watch will be able to receive message notifications.
-
Synchronize data
In daily wear, the watch will track many kinds of your activity data. The user needs to connect the watch via bluetooth on the APP before synchronous operation. The detailed operations are shown as follows:
Open
the mobile APP> swipe down the page> sync prompt appears
Notes! Please synchronize the data at least once within 7 days to avoid data loss at the watch end.
Touch key
Touch key
- Tap to wake the screen/return to the previous interface.
- Hold to pause or exit the exercise.
**Function Description
**
Tracker Interfaces
This is a full-touch screen: You can swipe the screen to go to different interfaces, and tap the screen to enter the function, or press the touch key to pause/exit.
- Swipe up/down to switch function interfaces, including messages, health data, workout, heart rate, stress, blood oxygen, sleep, relax, timer, music and settings.
- Swipe left to go to view daily activity data and weather notifications.
- Swipe right to Alexa voice control, quick settings bar(brightness levels, wrist sensor, do not disturb mode).
Note: The weather & music control functions are turned off by default. If you want to activate these functions, please turn them on manually on the VeryFit app (Go to the “Device” page tap “GT Band” tap “Device Settings” turn on the “Weather Notification” /”Music Control”).
- Dial Customize Your Home Screen You can customize the home screen of your tracker following the steps below:
Method 1:
- Tap the touch key to light up the screen, then long press the screen for 3-4 seconds.
- Swipe left/right to choose one and tap to confirm.
Method 2:
1)Open the VeryFit appgo to the “Device” page tap “GT Band” “Watch face market” “More”.
2)Select a watch face or choose a photo in your phone album to display on the home screen.
- Sports
14 Sports modes are provided: Outdoor runIndoor run outdoor walk indoor walkHikingOutdoor cycleIndoor cycle rocket Pool swim Open water swimYogaRowerEllipticalWorkout. You can choose to show or hide any sports mode in “veryfit”.
GT
Band has the Intelligent Sports Detection function, it can detect if the user
is running or walking; this function can be enabled or disabled in the App.
The Sports Summary of GT Band contains a variety of sports data,and the
details can be viewed in the veryfit App.
1. Start an exercise
Tap “Workout” in the function list of tracker Swipe down the screen to select the workout mode you want to start.
2. Set target
Before beginning an exercise, you can set training goals such as distance, duration, calories burned, etc.
3. During the exercise
• Swipe the screen up/down to flip through the workout data.
• Tap and hold the touch key until the progress circle is full to pause the exercise. Tap to resume the exercise.
4. End the exercise
- Tap and hold the touch key until the progress circle is full to pause the exercise.
- Tap to end the exercise and tap to confirm Exercise data will be displayed
after the exercise has ended. Swipe up the screen to flip through exercise
data.
Note: When enter the “pool swim”/”open water swim” mode, the screen of tracker will be locked automatically to prevent mistakenly? touching. Just scroll the screen in the direction of arrow for twice to unlock it.
5. Use your phone’s GPS to track workout route/distance
You can also use the GPS function of your phone to track your route & pace, distance during walks, hikes, runs or rides while mapping out your exercise on your phone (Take the phone with you while using the GPS function during exercise).In the “Training” page of the VeryFit app, choose an exercise mode and tap “Start” to start the exercise. After the exercise, you can effortlessly check your exercise data in both the app and the tracker.
Alexa Voice Control
Check the weather, set timers and alarms, and more by speaking to your tracker
through Alexa.
Set up Alexa
- Go to the “Device” page in the “VeryFit” app. Then tap “GT Band” icon “Amazon Alexa”.
- Log in to your Amazon account or create one if necessary.
- Read about what Alexa can do, and tap “Close” to return to your device settings in the VeryFit app.
- Swipe right of the tracker to go to Alexa voice control. Or press and hold the home button to start talking to Alexa.
- To change the language Alexa recognizes or disconnect your Amazon account, tap “amazon alexa” in the device information page in the app.
Note: The VeryFit app must be allowed to keep running in the background on your phone. And please also make sure the app is connected to WiFi or can access Cellular Data. Otherwise you may experience a delay in Alexa’s response time, or Alexa may not be able to recognize your voice command.
***Notice:
- Saying “Alexa” will not activate the voice assistant on your tracker-You must open Alexa voice control by clicking the Alexa icon of tracker or press and hold the home button to open it.
- Not all skills work with the tracker, as they must be able to display feedback as text on the tracker’s screen. This tracker doesn’t have a speaker, so you won’t hear Alexa respond.TT
Functions
Swipe up or down to select an icon. The icons include: Message, Health Data,
Workout, Heart Rate, Stress, SpO2, Sleep, Relax, Music, Time, and Settings.
-
Health Data
It
supports viewing the daily activity data the following info: Steps, Calories,
Distance and Activity. -
Heart Rate
1. It
supports measuring your heart rate any time or viewing the daily monitoring
data. Also, you can set the measurement frequency in the App settings;
2. After you start the heart rate monitor function, you should keep your arms and wrists still during the measurement.
Note: Automatic heart rate monitoring is ON by default. You can enable/ disable the continuous heart rate measurement in the VeryFit app (“Device” page “GT Band” “Health Monitoring” “HR monitoring”). -
Stress
After you
start the stress measurement , you should keep your arms and wrists still
during the measurement. -
SpO2
After you start
the SpO2 measurement , you should keep your arms and wrists still during the
measurement. -
Sleep
Sync the
tracker to VeryFit app once you get up, the tracker will show you the most
recent sleep record and sleep status at each stage. Or view a comprehensive,
detailed analysis graph of your sleep quality data in the app.(Only record the
sleep lasting more than 3 hrs) -
Relax
1. Enter the
Relax App and choose the duration;
2. Click to start, then follow the vibration frequency and animation instructions to adjust your breathing and it will help you relax. -
Time
A stopwatch and a timer are provided.
a) Stopwatch
You can
set the stopwatch on the bracelet and it supports recording multiple times.
b) Timer
You can set
the duration of timer on the bracelet, and it will remind you when time is up. -
Music
1. When the
bracelet is connected to the App, you can control the music player on your
phone. Common operations like Next /Previous, Play/Pause and Volume +/- are
supported.
2. This function can be displayedhide in the App settings. -
Settings
1. Under
Settings, functions like Find Phone, Restart, Power off, Reset (reset the
bracelet, all data in the bracelet will be cleared and it will be unbound from
the phone) and About are provided. -
Message
It supports different notifications, including message, incoming call, exercise reminder, “Drink Some Water!” tip, daily exercise goal reminder, etc.
FAQ
Q: Failure to connect the tracker to VeryFit app when pairing.
- Please make sure your smartphone’s Bluetooth is enable d, and the system of your phone is?iOS 9.0 or Android 4.4 above smartphones(Not for PC, Tablet or Samsung J3)
- Download the VeryFit app from APP store/Google play on your smartphone go to the “Device” page tap “Add Device” and select “Bracelet” When “GT Band” appears, tap it to connect.
- If the tracker still can’t be found/connected, please reset both your phone & the tracker, then use VeryFit app to scan the QR code displayed on your tracker to connect. (Go to the “Device” page of app tap scan icon in the upper right corner of the page to scan the QR code on the tracker).
Q: The tracker can’t receive message / calls notifications.
- Please make sure your smartphone’s Bluetooth is enable d, and the system of your phone is?i OS 9.0 or Android 4.4 above smartphones (Not for PC, Tablet or Samsung J3)
- Make sure the watch is connected with ‘VeryFit’ app succ essfully, then go to your smartphone Settings to find VeryFit app, enable the Location and all Notifications permissions. Please also make sure your phone’s drop-down menu can show you the message notification when it comes in.
- Open “VeryFit” app → “Device” → Tap the GT Band icon → “Message notification” → switch on “Allow notification” → click “√” to finish the setting)
- If it still doesn’t work, please delete the VeryFit app and also delete/forget the “GT Band” from the Bluetooth paired device list of your phone. Install the Veryfit app aga in, repeat the step #1 – 3.
Q: How to activate the Weather & Music Control function of tracker?
Please make sure the watch is connected with ‘VeryFit’ app successfully Open
the app and click the ‘Device’ below Tap the GT Band ‘Device Settings’ Switch
on the ‘Music Control’ or ‘Weather’ option.(*Note: The weather will not be
updated if disconnection occurs.)
Q: How To Check My Sleep Data?
Please sync the watch to ‘VeryFit’ app when you wake up, then the detailed
sleep data will show on the tracker. You can also view a comprehensive
analysis graph of your sleep quality data in app.(It will only record the
sleep lasting more than 3 hrs.)
Q: How to switch 12 hr/24 hr Mode? And how to switch the
Measure(Mi/Km)/Temperature Unit(°F/°C)?
Please make sure the watch is connected with ‘VeryFit’ app successfully Open
the app and click ‘My’ below Click “Setting’ Change the time mode/unit.
Q: How to turn on the tracker again after you turn it off?
You just need to plug it into any USB port/Wall charger to charge it to turn
it on again.