American Standard 607B121 IoT DetectLnk Exposed Urinal Flush Valve User Manual
- June 12, 2024
- American Standard
Table of Contents
American Standard 607B121 IoT DetectLnk Exposed Urinal Flush Valve User Manual
American Standard is devoted to making life, in the heart of your home,
better every day…
…so, thank you for inviting us in! With the very best in kitchen and bathroom
products, we are here to help make your life happier, healthier and simpler.
Our commitment to quality, innovation and performance has made us part of your
everyday routine for nearly 150 years, and we look forward to being a part of
your life for many years to come.
Learn more at www.AmericanStandard.com
Try the easy-scan QR code to quickly enter your information or find your product’s detailed warranty here: www.AmericanStandard.com/warranty
Registering allows you to keep your product information safe, and us the ability to contact you in the event of a product recall or any news about your purchase.
And if ever you have a question or need help…?
Call us at 1-855-815-0004
INSIDE THE BOX (BATTERY VERSION)
INSIDE THE BOX (AC VERSION)
NOTE TO INSTALLER: Please give this manual to the customer after installation.
To learn more about American Standard Selectronic® Products visit our website at: www.americanstandard-us.com or e-mail us at: ASdetectlnk@lixil.com
For Parts, Service, Warranty or other Assistance, please call (844) CRT-TEAM / 844-278-8326 (In Toronto Area only: 1-905-306-1093)
PRIOR TO INSTALLATION
Note: Prior to installing the DetectLnk™ Flush Valve the following items must be installed.
1. Urinal/Toilet
2. Drain line
3. Water supply line
IMPORTANT:
- All plumbing and electrical wiring should be installed in accordance with applicable codes and regulations.
- The use of water hammer arrestors is strongly recommended for commercial applications. All piping behind the walls should be properly secured and fastened.
- Water supply lines must be sized to provide an adequate volume of water for each fixture.
- Flush all water lines prior to operation Dirt and debris can cause flush valve to run continuously.
- With the exception of Stop Valve Inlet, DO NOT use pipe sealant or plumbing grease on any valve component or coupling!
- Protect the chrome or special finish on the Flushometer. DO NOT USE toothed tools on finished surfaces to install or service these valves. Also see “Care and Cleaning” section of this manual.
- This product contains mechanical and/or electrical components that are subject to normal wear. These components should be checked on a regular basis and replaced as needed to maintain the valve’s performance.
RECOMMENDED TOOLS
Installation steps will indicate which tools should be used with asscociated letter
Consult fixture manufacturer for minimum pressure requirements. Most High Efficiency water closets require a minimum flowing pressure of 25 psi (172 kPa). Many building codes and the ASME A112.19.2 fixture standard list Maximum static water pressure as 80 PSI (552 kPa).
FLUSH VAVLE INSTALLATION
Have a question or need help on install?
For questions or help on installation call us at
855-815-0004.
APPENDIX A
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: IoT Detectlnk UPS and 6078013.002, 6078051.002, 607B013.002, 607B051.002
Responsible Party : AS America, Inc. d/b/a LIXIL Americas
Address :
AS America, Inc. d/b/a LIXIL Americas
865 Centennial Ave.
Piscataway, New Jersey 08854
www.americanstandard.com |
www.dxv.com |
www.grohe.com/us | lixil.com
FCC Compliance Statement : According to FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The equipment complies with the safety requirements for RF exposure for mobile (>20 cm) use conditions in accordance with FCC rule part 2.1091.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
- The equipment complies with the safety requirements for RF exposure in accordance with RSS-102
TELL US WHAT YOU THINK!
Please leave us a product review or story at
AmericanStandard.com/reviews
Find installation videos at youtube.com/americanstandard
Register your warranty and sign up for an idea-filled newsletter at AmericanStandard-us.com/support/warranty
PLEASE COMPLETE AMERICAN STANDARD WARRANTY REGISTRATION PROCESS AND SAVE THIS WARRANTY INFORMATION IMPORTANT: Registration of the sink must be completed for this warranty to become effective. Your registration will make it easier to contact you in the event of a product recall.
- INSTRUCTIONS: Register your sink at www.americanstandard.com. Please save your proof of purchase (sale receipt). If you need assistance or do not have access to our website, please contact American Standard Customer Care at: 800-442-1902. An American Standard representative will assist in completing the warranty registration.
*In California, your warranty rights remain intact even if you do not complete the registration process.
SHARE YOUR NEW PRODUCT!
Tag us @american_standard on Instagram and show us how your new product looks.
WANT MORE INFO?
For questions or help call us at
855-815-0004, or visit
AmericanStandard.com
UNITED STATES
American Standard Brands
865 Centennial Ave.
Piscataway, New Jersey 08854
Attention: Director of Customer Care
For residents of the United States, warranty information may also be obtained
by calling the following toll free number:
855-815-0004
www.AmericanStandard.co
CANADA
LIXIL Canada, Inc.
5900 Avebury Rd.
Mississauga, Ontario
Canada L5R 3M3
Toll Free: 800-387-0369
AmericanStandard.ca/support/
warranty
MEXICO
American Standard B&K Mexico
S. de R.L. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
Toll Free: 800-839-1200
AmericanStandard.com.mx/garantia
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>