Acoustic Audio WS1005 In-Wall Subwoofer Amplifier USER’S MANUAL
- June 12, 2024
- Acoustic AUDIO
Table of Contents
Acoustic Audio WS1005 In-Wall Subwoofer Amplifier
Thank You for your purchase of your new
Acoustic Audio Passive In-Wall Subwoofer Amplifier!
Acoustic Audio amplifier for a passive in-wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. It delivers crisp, clean power with easy connectivity to a vast array of audio sources for your household audio entertainment. Compatible with In Wall Subwoofers, In-Wall or Ceiling Home Entertainment, Home Theater systems, multiple room systems, and industrial sound systems. Used in accordance with the information provided, this product will give you years of trouble-free listening enjoyment!
IMPORTANT:
Before operating or connecting anything to the amplifier, please read the accompanying instruction manual carefully for correct operating precautions and wiring procedures.
Amplifier Front Panel
- Power ON/OFF Button
- Power LED Indicator
- Crossover Control Dial
- Sub Volume Control Dial
Amplifier Back Panel
- Left Input / LFE Input
- Right Input
- Normal/ LFE Switch
- Black(-) Output
- Red(+) Output
- Fuse 3A / 250V
- AC In 18V
Features
- Power Amplifier Output: 200 Watts
- Frequency Response: 50 – 200 Hz,+/- 3dB
- Output Impedance: 4-8 ohm
- Sub Volume and crossover control knobs
- LFE and RCA Inputs for use from a home audio receiver
- Raw Wire Outputs
- Power Supply: AC 18V
- Fuse: 3A / 250V
- Dimensions (HxWxD): 2.25″ x 8.5″ x 6″
Package Contains
- WS 1005 Subwoofer Amp
- 6-Foot RCA Cable
- “Y” Adapter
- AC Power Supply Cord
- User Manual
Safety Precautions
- Please review the full manual before using the equipment.
- To reduce the risk of electric shock DO NOT open the unit. Any service should be done by an audio technician.
- Do not expose this unit to direct sunlight or sources of extreme heat.
- Clean only with a damp cloth and avoid using solvents or detergents.
- Do not expose this unit to rain or submerge in water.
- Make sure all equipment is turned off and volume levels down when connecting equipment or before turning it back on again.
- This unit cannot accept amplified signals. All input sources must be at line level.
PRODUCT USAGE
The Acoustic Audio WS1005 In-Wall Subwoofer Amplifier is a specialized piece of audio equipment that was developed to provide power to subwoofers that are installed in ceilings or walls.
The following information is provided as it pertains to the product usage of the Acoustic Audio WS1005:
-
Amplification:
The WS1005 is a power supply and amplifier that was developed with the express purpose of meeting the requirements of in-wall and in-ceiling subwoofers. It is not a subwoofer that stands on its own but rather an amplifier that is designed specifically for use with subwoofers. -
Compatibility with Subwoofers:
The WS1005 is compatible with the vast majority of passive in-wall or in- ceiling subwoofers, all of which require an external amplifier in order to function properly. -
Power Coming Out:
The attached subwoofer is driven by the WS1005 amplifier, which supplies a predetermined amount of power, measured in watts. Because there is a possibility of variation in the power output of the amplifier, it is essential to check the specifications of the particular model that you have. -
Connection:
In order to function properly, the WS1005 amplifier needs to be connected to a subwoofer that is compatible with it. Depending on the kind of inputs that are available on the subwoofer, it will normally connect using speaker wire or RCA cables. -
Modifications and Controls:
In most cases, the WS1005 amplifier will come equipped with controls for the volume, crossover frequency, phase, and power. You have the ability to fine- tune the performance of the attached subwoofer thanks to these controls. -
Installation:
The WS1005 amplifier was developed to be mounted in a wall or in another concealed area, so giving a setup that is clean and devoid of clutter. Installation may require the assistance of a professional or specific knowledge applicable to in-wall installations. -
The Power Sources Are:
In order to function, the WS1005 amplifier needs a power supply, which is normally a regular electrical socket. Make sure that the amplifier is hooked up to an appropriate power supply. -
Compatibility:
The WS1005 amplifier is compatible with the vast majority of home theater receivers and audio systems on the market today, provided that these other devices provide a preamp output or dedicated subwoofer output. It is possible to incorporate it into a more comprehensive audio system in order to achieve improved low-frequency performance. -
Performance of the Subwoofer:
The linked subwoofer is driven by the WS1005 amplifier, which supplies the necessary power to reproduce low-frequency bass precisely and with greater force. -
Positioning of the Subwoofer:
Because it is possible to put the amplifier in-wall or in a concealed location apart from the subwoofer itself, the WS1005 amplifier makes it possible to position the subwoofer in a variety of different locations. -
Concerns Regarding the Wiring:
When connecting the WS1005 amplifier to the subwoofer, make sure to use speaker wire or RCA cables of the appropriate gauge. This should be done in accordance with the requirements provided by the manufacturer of both the amplifier and the subwoofer. -
Additional Characteristics:
The WS1005 amplifier may be equipped with additional features like an auto- sensing power on/off switch, an adjustable low-pass filter, or line-level inputs, depending on the particular model that is purchased. -
Protection for the Wiring:
When installing the WS1005 amplifier in-wall, make sure to follow all of your community’s electrical standards and guidelines. This will ensure that your wire is properly protected and safe. -
Warranty:
In most cases, the WS1005 amplifier will be accompanied by a warranty that is offered by Acoustic Audio. For specific information regarding the warranty, please refer to the product documentation or get in touch with the manufacturer. -
Audio Calibration:
It is highly suggested that the settings of the WS1005 amplifier be calibrated in collaboration with your audio system in order to obtain maximum performance and seamless integration with any additional speakers. -
Support for a Number of Subwoofers:
You may be able to power and control numerous in-wall or in-ceiling subwoofers concurrently if your WS1005 amplifier model supports multiple subwoofers, as some models of the WS1005 amplifier do. -
Compatibility with the Audio Source:
The WS1005 amplifier is compatible with a wide variety of audio sources, such as stereo amplifiers, home theater receivers, and audio distribution systems that offer a subwoofer output. -
Responses at Lower Frequencies:
The WS1005 amplifier was developed for the purpose of handling low-frequency reproduction and is primarily focused on driving subwoofers in order to produce a bass response that is powerful and impacting. -
Individualized System Integration:
The WS1005 amplifier is appropriate for use in custom audio installations in which a concealed subwoofer is desired. This gives the installation a neat and streamlined appearance because there is no apparent audio equipment. -
Help from Qualified Individuals:
If you are unsure about how to install or configure the WS1005 amplifier, it is strongly advised that you seek the assistance of a professional or review the product literature that has been provided by Acoustic Audio.
FREQUENTLY ASKED QUESTION
What is the Acoustic Audio WS1005 In-Wall Subwoofer Amplifier?
The Acoustic Audio WS1005 is an in-wall subwoofer amplifier designed to power in-wall or in-ceiling subwoofers.
What is the power output of the WS1005 amplifier?
The power output of the WS1005 amplifier may vary depending on the model. It is typically specified in watts (W) and can range from 200W to 400W.
Can I use the WS1005 amplifier with any subwoofer?
The WS1005 amplifier is compatible with most passive in-wall or in-ceiling subwoofers that require an external amplifier for operation.
Can I adjust the settings of the WS1005 amplifier?
Yes, the WS1005 amplifier typically includes controls for volume, crossover frequency, phase, and power. These controls allow you to fine-tune the performance of the connected subwoofer.
Does the WS1005 amplifier require professional installation?
While professional installation is not mandatory, it may be recommended for in-wall installations to ensure proper wiring and placement.
What is the ideal power source for the WS1005 amplifier?
The WS1005 amplifier requires a standard electrical outlet as its power source. Ensure that the amplifier is connected to a suitable power supply.
Is the WS1005 amplifier compatible with home theater receivers?
Yes, the WS1005 amplifier is compatible with most home theater receivers or audio systems that have a dedicated subwoofer output or preamp output.
Can I use the WS1005 amplifier for outdoor subwoofers?
The WS1005 amplifier is not specifically designed for outdoor use. It is recommended to use it in indoor environments or covered outdoor areas.
Does the WS1005 amplifier include an auto-sensing power on/off feature?
WS1005 amplifier may include an auto-sensing power on/off feature, which automatically turns the amplifier on or off when an audio signal is detected.
Can I adjust the low-pass filter on the WS1005 amplifier?
Yes, the WS1005 amplifier typically includes an adjustable low-pass filter that allows you to control the frequency range of the subwoofer.
Can the WS1005 amplifier be used with custom audio installations?
Yes, the WS1005 amplifier is suitable for custom audio installations where a concealed subwoofer is desired, providing a clean and streamlined appearance without visible audio equipment.
Does the WS1005 amplifier require any audio calibration?
It is recommended to calibrate the WS1005 amplifier's settings in conjunction with your audio system to achieve optimal performance and integration with other speakers.
Can I use the WS1005 amplifier with a stereo amplifier or audio distribution system?
Yes, the WS1005 amplifier can work with various audio sources, including stereo amplifiers or audio distribution systems that provide a subwoofer output.
Can I install the WS1005 amplifier in a visible location?
The WS1005 amplifier is typically installed in a concealed location, such as in-wall or in a dedicated equipment closet, to provide a clean and clutter- free setup.
What should I consider regarding wiring when using the WS1005 amplifier?
When connecting the WS1005 amplifier to the subwoofer, ensure that proper gauge speaker wire or RCA cables are used, based on the specifications provided by the amplifier and subwoofer manufacturer.
DOWNLOAD THE PDF LINK:Acoustic Audio WS1005 In Wall Subwoofer Amplifier USER’S MANUAL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>