SIGURO SGR-HS-H100xx Air Heater User Manual
- June 3, 2024
- SIGURO
Table of Contents
SIGURO SGR-HS-H100xx Air Heater
Thank you for purchasing a SIGURO appliance. We are grateful for your trust
and are pleased to introduce the device to you on the following pages and
introduce you to all its functions and uses.
We believe in a fair and responsible company and therefore we only work with
suppliers who meet our strict criteria for protecting the interests of
emÂployees, preventing their abuse and provide fair working conditions. If
you need help with extensive maintenance or repair of the product, which
requires intervention in its internal parts, our authorized service is
available at the email address [email protected], or the
operators at the seller’s info line. We have unified these contact points for
your convenience in solving any probÂlems with the products and the above
contacts can be used in the event of any complaints or post-warranty service.
SAFETY INFORMATION
Please read this manual carefully before use and keep it for future reference. This product is only suitable for well-insulated areas or temporary use.
- This appliance is intended for use by children 8 years of age and older and persons with reduced physical or mental abilities or lack of experience and knowledge, provided they have been given supervision or instruction concerning use of the appliance in a safe manner and understand the potential hazards. Children must not play with the device. Cleaning and user maintenance must not be done by children without supervision. Children under the age of 8 must be kept out of the reach of the appliance and its power supply.
- Make sure that the voltage in your outlet corresponds to the voltage indicated on the type plate of the appliance and that the outlet is properly grounded. The electrical outlet must be installed in accordance with the applicable electrical standard.
- Protect the device from direct contact with water and other liquids to prevent electric shock.
- The product is intended for domestic use only! Do not use the hot air fan outdoors or in a humid environment, or touch the power cord or the appliance with wet hands. There is a risk of electric shock.
- Pay extra attention when using the hot air fan near children!
- Do not use the hot air fan near or under flammable objects, such as drapes. The surfaces’ temperature near the hot air fan (90 cm) may be higher than usual during operation. Place the hot air fan out of the reach of other objects so that the free air circulation required for its proper operation is ensured. Never cover the opening of the hot air fan!
- Do not use this hot air fan with a programmer, timer, stand-alone remote control system, or any other device that automatically switches the fan, as there is a risk of fire if the fan is covered or incorrectly positioned.
- Do not use this fan in the immediate vicinity of a bath, shower or swimming pool!
- Never place the hot air fan on soft surfaces such as a bed, sofa, etc.
- If there is an unusual odour or smoke coming from the machine, unplug it immediately and visit a service center with the machine.
- Do not turn the device on or off by inserting or removing the power plug. Always switch off the hot air fan with the main switch first, then you can unplug the power cord from the power outlet.
- We recommend that you do not leave the hot air fan with the plugged in cable unattended. Unplug the power cord from the AC outlet before maintenance. Do not pull the plug out of the outlet by the cord. Disconnect the cable from the outlet by grasping the plug.
- The power cable must not touch hot parts or run over sharp edges.
- Do not insert fingers or other objects into the openings of the hot air fan.
- . Use the hot air fan only in accordance with the instructions in this manual. The manufacturer is not liable for damage caused by improper use of this device.
- This heater is not equipped with a room temperature control device. Do not use this heater in small rooms if it is occupied by persons who are unable to leave the room on their own, unless permanent supervision is provided
WARNING: Surfaces marked in this way become hot during use.
DESCRIPTION
- Thermostat control
- Main switch and power setting
- Operation indicator
- Air outlet
- Air inlet
| Data | Mark | Value | Unit |
|---|
Heat output
Nominal heat output| ****
p nom
| 1.5| kW
Minimum heat output (approximate)| p mm| 1.0| kW
Maximum heat output| ****
p max,c
| 1.5| kW
Consumption of auxiliary electricity
At nominal heat output| e l m a x| 1.5| kW
At minimal heat output| el mm| 1.0| kW
In standby mode| el59| N/A| kW
Only for storage electric local heaters: type of heat intake (one possible
value)
Manual heat storage control with integrated thermostat| NO
Manual control of heat storage with feedback informing about room tempera
ture and/ or outdoor temperature| NO
Electronic heat storage control with feedback informing about room tempera
ture and/ or outdoor temperature| NO
Heat output with fan| NO
Type of heat output/ room temperature control (one possible value)
One level of heat output without room temperature control
NO
Two or more manual levels, without room temperature control
NO
With mechanical thermostat for room temperature control| YES
With electronic room temperature control| NO
With electronic room temperature control and daily program| NO
With electronic room temperature control and weekly program| NO
Other control options (more possible values)
Room temperature control with detection of the presence of persons| NO
Room temperature control with detection of open window| NO
With remote control| NO
With adaptively controlled start| NO
With limited operating time| NO
With black ball sensor| NO
USE
Start of operation and power setting
-
This hot air fan uses hot air technology with the possibility of temperature control. You can set the required power level by turning the main switch (2) or rotation:
O = the fan is off {,;) = lower power level (1000 W) ({,;)”)=higher power level {1500 W) “-.,II= horizontal rotation at lower or higher power level -
You can turn the switch from the position O (off) to the left or to the right, depending whether you want to activate horizontal fan rotation.
-
When the hot air fan is switched on, the red indicator light comes on.
-
Turn the thermostat knob clockwise to maximum (MAX).
-
When the desired room temperature is reached, turn the thermostat control counter-clockwise until you hear a slight click to indicate that the thermostat is off. The hot air fan turns off and the indicator turns off.
-
The appliance now maintains the set temperature in the room. Once as the room temperature drops, the hot air fan switches on automatically and switches off again automatically when the desired room temperature is reached.
Turning off the device
- Turn the thermostat control counter-clockwise to the minimum {MIN).
- Switch the main switch to position 0.
Temperature safety fuse
The device is equipped with a safety fuse that automatically shuts it off in
case of overÂheating. If it overheats, turn off the hot air fan heater by
turning the switch to position OFF, disconnect from power supply and allow it
to cool for at least 10 minutes. Then you can plug the heater back to
electricity and turn it on again.
Lock preventing the fan from rotating
The device is equipped with an anti-rotation lock, which is activated when you
turn the fan upside down. In this case, it will shut off automatically. It
will only be possible to switch on the fan after turning it to the correct
vertical position.
CLEANING AND MAINTENANCE
- Before cleaning, always unplug the power cord and wait for the appliance to cool down completely. Clean the external surface of the fan with a damp cloth. Do not use sharp objects or abrasives for cleaning, as this could damage the finish of the appliance.
- You can store the appliance only after the main switch has been switched off properly, disconnected from power and after it has cooled down completely.
- If you do not use the appliance for a long time, it should be stored in a clean and dry place protected from dust.