SpeaKa 2618627 SP-HSW-300 2 ports HDMI Switch User Manual

SP-HSW-300 2 ports HDMI Switch
2 In 1 Out 8K HDMI Splitter
Item no: 2618627
Operating Instructions

2618627 SP-HSW-300 2 ports HDMI Switch

http://www.conrad.com/downloads

Intended use

The product is a two inputs to one output (max. 8K 60 Hz) HDMI switch.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

Delivery contents

• Product
• USB-A to USB-C® power cable
• Remote control (CR2032 battery inside)
• Operating instructions

Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols

The symbol warns of hazards that can lead to personal injury.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

5.2 Handling

• Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

5.3 Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.
• Do not switch the product on after it has been taken from a cold to a warm environment.
  The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.

5.4 Operation

• Consult an expert when in doubt about the operation, safety or connection of the product.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  – is visibly damaged,
  – is no longer working properly,
  – has been stored for extended periods in poor ambient conditions or
  – has been subjected to any serious transport-related stresses.

5.5 (Rechargeable) Batteries

• Correct polarity must be observed while inserting (rechargeable) batteries.

• The (rechargeable) batteries should be removed from the device if it is not used for a
  long period of time to avoid damage through leaking. Leaking or damaged (rechargeable) batteries might cause acid burns when in contact with skin, therefore use suitable protective gloves to handle corrupted (rechargeable) batteries.

• (Rechargeable) batteries must be kept out of reach of children. Do not leave (rechargeable) batteries lying around, as there is risk, that children or pets swallow them.

• All (rechargeable) batteries should be replaced at the same time. Mixing old and new (rechargeable) batteries in the device can lead to (rechargeable) battery leakage and device damage.

• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-rechargeable batteries. There is a risk of explosion!

5.6 Connected devices

• Also observe the safety and operating instructions of any other devices which are connected to the product.

Remote controller battery

Note:
The product ships with battery preinstalled. Remove the battery release tab when using for the first time.

1. Remove the battery compartment cover.
2. Insert a battery matching the polarity shown inside.
3. Replace the battery compartment cover.

Connection

Notes:

• The infrared sensor IR should point towards the remote controller.
• Your source devices, HDMI cables, and output display should support the desired resolution and refresh rates (e.g., 8K 60Hz or 4K 120Hz).

Preconditions:
**** Product and peripherals are disconnected from the power supply.

1. Connect source device (devices) to the HDMI inputs INPUT1 / INPUT2.
2. Connect a display to the HDMI output OUTPUT.
3. Connect a USB-C® power cable to the input USB/POWER.
4. Connect the other end of the charging cable to a suitable power supply.
   → The LED status indicator will light up to show the product is receiving power.

Operation

1. Switch all connected devices ON.
2. Change inputs using the buttons on the product or remote control.
   → The indicator light on the product (1 or 2) will light up depending on which input is active.
   → The content will show on the connected display.

Notes:
Manual switching
If both HDMI inputs are connected and active, you should manually select the input.
Auto switching
If both HDMI inputs are connected but only one is active, the product will automatically switch to the active input.

Troubleshooting

closer

Cleaning and care

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
  They damage the housing and can cause the product to malfunction.

• Do not immerse the product in water.

1. Disconnect the product and any peripherals.
2. Clean the product with a dry, fibre-free cloth.

Disposal

11.1 Product
This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
11.2 (Rechargeable) batteries
Remove batteries/rechargeable batteries, if any, and dispose of them separately from the product. According to the Battery Directive, end users are legally obliged to return all spent batteries/rechargeable batteries; they must not be disposed of in the normal household waste.
Batteries/rechargeable batteries containing hazardous substances are labelled with this symbol to indicate that disposal in household waste is forbidden. The abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or wherever (rechargeable) batteries are sold. You thus fulfil your statutory obligations and contribute to environmental protection.
Batteries/rechargeable batteries that are disposed of should be protected against short circuit and their exposed terminals should be covered completely with insulating tape before disposal. Even empty batteries/rechargeable batteries can contain residual energy that may cause them to swell, burst, catch fire or explode in the event of a short circuit.

Technical data

12.1 HDMI switcher
Input ……………………………………….. 5 V/DC 1 A via USB-C®
DVI signal support (via adaptor) ….. yes
Power consumption …………………… max. 1.5 W
Supported resolutions………………… 8K@60Hz, 4K@120Hz, 1080p@240 Hz, 720p@50/60 Hz, 576p@50/60 Hz, 480p@50/60 Hz
Signal speed…………………………….. max. 48 Gbps
Vertical frequency range…………….. 60 Hz
HDCP compliant ……………………….. yes
HDR support…………………………….. Yes
Input video signal………………………. 0.5 – 1.0 V P-P
Input DDC signal ………………………. 5 V P-P (TTL)
Deep colour ……………………………… 12 bit
Single link range ……………………….. 8K (7680 x 4320)
HDMI input/output……………………… 2x inputs, 1x output Cable length: max. 5 m
Switching type ………………………….. manual
USB power cable………………………. 80 cm
Dimensions (W x H x D) …………….. 102 x 65 x 16 mm
Weight …………………………………….. 104 g
12.2 Remote control
Power supply ……………………………. 1x 3 V CR2025
Range ……………………………………… max. 8 m
Communication protocol…………….. Infrared
12.3 Environment
Operating conditions………………….. 0 to +70 °C, 20 – 90 % RH (non-condensing)
Storage conditions…………………….. -20 to +85 °C, 5 – 95 % RH (non-condensing)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2618627_V1_1122_dh_mh_en 699167755-2 I1/O1 en

References

• Conrad Electronic » All parts of success
• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>