ELEKTRA 42654 LED Wall Lamp Instruction Manual
- June 13, 2024
- ELEKTRA
Table of Contents
ELEKTRA 42654 LED Wall Lamp Instruction Manual
ASSEMBLY&INSTALLATION
Please read carefully and save these instructions, as you may need them a
later date.
CAUTION
Turn off the main power at the circuit breaker before installing the
fixture, in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
ASSEMBLY AND INSTALLATION
- Carefully unpack the fixture, lay out all parts on a clean surface.
- Use the wire connector(7) to connect the ground wire from the fixture (4) to the ground wire from the post (3). Use the wire connector(7) connect the white wire from the fixture (2) to the white wire (1 neutral wire) from the post. Use the wire connector(7) connect the black wire from fixture (6) to the black wire (5 live wire) from post. Position the wires back inside the post cap(12 ). Then put the post cap(12) over post.
- Install the bulb (11 not included) into the socket. Make sure they do not exceed the maximum wattage specified on the fixture’s wattage rating label.
- Insert the glass panel(10) into the top edge of the cage,then secure the glass panel by pressing the tabs on to the top and bottom edge. added the Soft pads(15) (include in the parts bag) under the tabs acoordingly if anyone loose.
- Put the cage (13) onto the metal sheet (14), then secure it by fixture screw (9).
- Screw the screw (8) through the holes on the post cap until the fixture is secure.
- Turn on the power.
INSTALLATION IS NOW COMPLETED
Read User Manual Online (PDF format)
Loading......