SAMSUNG HW-Q800C-ZC 5.1.2 Channel Sound Bar with Bluetooth User Guide
- June 9, 2024
- Samsung
Table of Contents
HW-Q800C-ZC 5.1.2 Channel Sound Bar with Bluetooth
Product Information: F/W Upgrade Guide Samsung Electronics
The F/W Upgrade Guide Samsung Electronics is a guide that provides step-by- step instructions on how to upgrade the firmware of Samsung Soundbars. The guide includes information on how to prepare a USB memory drive and how to upgrade the firmware using the USB drive. The guide is compatible with the following models: HW-Q9C/Q8C/Q7**C.
Product Usage Instructions
Step 1: How to prepare the USB Memory Drive
-
Download the firmware file from Samsung.com into your computer.
File Name: SAT-iMX8M23WWC_10xx.x_USB.zip -
Connect the USB Memory Drive to the USB port of your PC. Copy the file to USB Memory Drive.
-
Follow below steps to extract the file and make a folder for firmware. The folder should have the same name as the file and exist in the root directory. An extracting process might be different by application in PC.
-
Click the file and
Extract All.... Then select USB
driver that files will be extracted.
SAT-iMX8M23WWC_USB.zip
-
Make sure that USB Driver has a folder named
SAT-iMX8M23WWC.
OK
NG
SAT-iMX8M23WWC_USB
SAT-iMX8M23WWC
-
Safely disconnect the USB memory drive by clicking in
Safely Removein Task Bar.
Step 2: How to upgrade the Firmware by USB (For HW-Q9C/Q8C/Q7C)**
- Turn on the Soundbar and insert the USB drive into the SERVICE port located on the bottom of the Main Unit. The software will begin to update automatically in less than one minute.
- A sequence of
UPDATE BYE ONwill appear on the display 3 times. It would take around 6 minutes. - After the 3 cycles are complete, the Soundbar will restart and last source used will appear on the display for about 20 seconds and then it will go off. (UPDATE BYE ON) 3 times D.IN OFF
Cycle and duration of update may differ by models.
Important: Please DO NOT turn off the power or remove the USB while
updating.