Acoustic Audio AA321W Mountable Indoor Speakers User Manual

Acoustic Audio AA321W Mountable Indoor Speakers

PRODUCT INSTRUCTIONS

• Unboxing:
  To begin, cut open the package and extract its components one by one with extreme caution. Make sure you have all of the following things with you:

  • AA321W speakers by Acoustic Audio, sold as a pair
  • brackets for mounting, in pairs
  • Screws and anchors used for mounting
  • User manual

• Placement:
  Find out where your speakers should be placed for the best sound. The AA321W speakers are meant to be used inside and have the ability to be installed on either the ceiling or the wall. You should choose a spot that not only maximizes the sound dispersion but also enhances the experience of the listening environment.

• Mounting:
  Make a mark at the appropriate spot on the wall or ceiling for each speaker using the mounting brackets that are provided in the package. Check to ensure that the brackets are fastened firmly and at the correct level. When mounting the brackets to the surface, use the screws and anchors that were given to you. Be careful to follow the instructions for the correct way to mount anything on the wall or ceiling, taking into account the particular surface that you have.

• Wiring:
  After the brackets have been secured in a secure manner, the speaker wires should be connected to the terminals located on the back of each speaker. In most cases, there will be two terminals that are indicated by the symbols “+” (for positive) and “-” (for negative). When connecting the wires, you need to pay attention to the polarity so that you may continue to get accurate audio reproduction.

• Powering:
  The AA321W speakers are passive speakers, which means they cannot provide their own power and must instead be powered by an external amplifier or receiver. Make the connection between the relevant speaker output terminals on your amplifier or receiver and the other end of the speaker cables. you ensure that your audio equipment is properly connected, be sure you follow the directions that came with it.

• Testing:
  Once everything is hooked up, you can begin playing audio by switching on your audio source (for example, a stereo system or an AV receiver) and turning it on. You should test the sound coming out of the speakers to check that they are functioning properly. Make the necessary adjustments to the volume levels.

• Fine-tuning:
  Experiment with the positioning and direction of the speakers to see what yields the best results in the area where you will be listening, if necessary. To get the best possible sound reproduction, it is important to take into account aspects such as the acoustics of the space, the positioning of the furniture, and your own tastes.

Note:
It is very necessary to read the user handbook that is included with the Acoustic Audio AA321W speakers and to adhere to any particular instructions or safety precautions that may be included in the document.

Congratulations on your purchase and welcome to the world’s finest brand of audio equipment. If you ever have questions on your product, please contact your authorized dealer and their highly experienced staff will be more than willing to help. Please read the following manual carefully before installing, connecting, or adjusting your new speaker.

Note: These speakers are water-resistant and can be used both outdoors and indoors. Please do not submerge these in water (i.e. pool or pond) as submersion will void your manufacturer’s warranty.

Features

AA321

• Recommended Power: 20-400 Watts per pair
• Frequency Response: 150Hz-20,000Hz
• Efficiency/Sensitivity: 88dB at 1 watt 1 meter
• Impedance: 8 Ohm
• 2.5″ Polypropylene Full Range Woofers
• Quick Release Spring Loaded Wire Terminals
• Heavy Duty ABS Construction Sealed Cabinets
• Each Speaker Size (H x W X D): 3.5″ x 3.5″ x 4.5″
• Designed And Engineered in the USA
• Full Instructions, Mounting Brackets, and Hardware Included
• Available in black and white

AA32

• Recommended Power: 20-300 Watts
• Frequency Response: 90Hz-20,000 kHz
• Efficiency/Sensitivity: 90dB at 1 watt 1 meter
• Impedance: 8 Ohm
• Two 2.5″ Polypropylene Full Range Woofers
• Quick Release Spring Loaded Wire Terminals
• Heavy Duty ABS Construction Sealed Cabinet
• Speaker Size (H x W X D): 3.625″ x 8″ x 4.25″
• Designed And Engineered in the USA
• Full Instructions, Mounting Brackets, and Hardware Included
• Available in black and white

AA35

• Recommended Power: 20-400 Watts
• Frequency Response: 70Hz-20 kHz
• Efficiency/Sensitivity: 92dB at 1 watt 1 meter
• Impedance: 8 Ohm
• Two 3″ Polypropylene Full Range Woofers
• 1″ Soft Dome Tweeter
• Quick Release Spring Loaded Wire Terminals
• Heavy Duty ABS Construction Sealed Cabinet
• Speaker Size (H x W X D): 4.1″ x 9.6″ x 3.9″
• Designed And Engineered in the USA
• Full Instructions Included
• Available in black and white

AA40

• Recommended Power: 20-500 Watts
• Frequency Response: 94Hz-20 kHz
• Efficiency/Sensitivity: 94dB at 1 watt 1 meter
• Impedance: 8 Ohm
• Two 4″ Polypropylene Full Range Woofers
• 1″ Soft Dome Tweeter
• Quick Release Spring Loaded Wire Terminals
• Heavy Duty ABS Construction Sealed Cabinet
• Speaker Size (H x W X D): 5.75″ x 15.6″ x 5.75″
• Designed And Engineered in the USA
• Full Instructions Included
• Available in black and white

Applications

• Surround Sound System
• Center Channel Surround Sound
• Home Theater System
• Multiple Room System
• Bookshelf Speaker
• Bathroom/ Kitchen
• Car Audio
• Industrial Sound System

Wiring the Speakers

Please turn off and unplug your system prior to making any connections. To wire your system, use good quality speaker cable with polarity coding (usually identified with a marking on the cable). Use 16 gauge speaker wire for up to 40ft and 14 gauge speaker wire for more than 40 ft. Connect the positive lead of the speaker wire (indicated with”+”) to the red(+) speaker terminal. Connect the negative lead of the speaker wire to the black(-) speaker terminal. Connect the other end of the speaker wire to the respective inputs on the amplifier. See the diagram below.

Mounting to the Wall

First, connect the bracket to the wall using the wall screws and a drill. Once the bracket is secure, use the speaker screws to attach the bracket to the holes in the speaker. Screw tightly by hand leaving enough slack so the speaker may rotate. See the diagram below.

Note: Failure to properly install the speaker could cause injury from falling objects.

Listening Test

Once you have connected your speakers, turn on your system and begin playback of material you are familiar with. Begin at a low volume and increase to a comfortable listening level. The system should sound balanced with stereo sound. If the sound is distorted, check to make sure that the speakers have been correctly wired to your amplifier or receiver.

FREQUENTLY ASKED QUESTIONS

What is the power handling capacity of the Acoustic Audio AA321W speakers?

The Acoustic Audio AA321W speakers have a power handling capacity of 200 Watts per pair or 100 Watts each.

Can I use the AA321W speakers with a Bluetooth device?

No, the AA321W speakers are passive speakers and require an external amplifier or receiver to power them. They do not have built-in Bluetooth functionality.

Are the mounting brackets included with the AA321W speakers?

Yes, the AA321W speakers come with mounting brackets included in the package.

Can the AA321W speakers be used in a home theater setup?

Yes, the AA321W speakers can be used in a home theater setup as front or rear speakers, providing immersive sound for movies and music.

Are the AA321W speakers suitable for outdoor use?

No, the AA321W speakers are designed for indoor use only and are not weatherproof.

Can I connect the AA321W speakers directly to a TV?

No, the AA321W speakers require an amplifier or receiver to power them. They cannot be directly connected to a TV.

What is the frequency response of the AA321W speakers?

The AA321W speakers have a frequency response range of 150Hz to 20kHz.

Do the AA321W speakers come with speaker wires?

No, the AA321W speakers do not come with speaker wires. You will need to purchase speaker wires separately.

Can I paint the AA321W speakers to match my wall color?

Yes, the AA321W speakers have paintable frames, allowing you to customize their appearance to match your wall color.

Can the AA321W speakers be used as surround speakers in a surround sound system?

Yes, the AA321W speakers can be used as surround speakers in a surround sound system to enhance the audio experience.

What is the impedance of the AA321W speakers?

The AA321W speakers have an impedance of 8 Ohms.

Can I mount the AA321W speakers on the ceiling?

Yes, the AA321W speakers can be mounted on the ceiling using the included mounting brackets.

Are the AA321W speakers magnetically shielded?

Yes, the AA321W speakers are magnetically shielded to prevent interference with nearby electronic devices.

Can I use banana plugs to connect the AA321W speakers?

Yes, the AA321W speakers have spring-loaded speaker terminals that can accommodate banana plugs for easy and secure connections.

What is the sensitivity rating of the AA321W speakers?

The AA321W speakers have a sensitivity rating of 88dB.

DOWNLOAD THE PDF LINK: Acoustic Audio AA321W Mountable Indoor Speakers User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>