Signify FluxSpace LED Linear Strip Installation Guide

Signify Classified – Internal

Day-Brite

by

General Purpose Linear

FluxSpace LED Strip

FluxSpace – Wire Guard – 442296081431

CAUTION: THE INSTALLATION AND SERVICING OF THIS PRODUCT SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN OR SERVICE PERSONNEL

INSTALLATION INSTRUCTIONS.

1. Mount (4) metal clamps on Wireguard at the (4) locations shown in Fig. 1. Once in position, squeeze the clamps to keep them in place.
2. Slide the Wireguard from one side of the luminaire housing so the holes in the metal clamps are aligned with holes in the housing.
3. Install (4) screws provided with the Wireguard (Fig. 2).

FIG. 1

1. CLAMPS
2. WIREGUARD

FIG. 2

CAUTION: This fixture is designed for permanent installation in ordinary (Non-Hazardous) locations in accordance with the National Electrical Code and all applicable local codes. Do not use in areas of limited ventilation or in high ambient enclosures. The lamp and fixture operate at high temperatures. Contact with combustible materials can cause fire and personal contact can cause severe burns.

FIG. 3

1. SAFETY CABLE

FIG. 4

1. SNAP HOOK

4. Install Safety Cable in location shown in Fig 3 and 4. Pass one end of the safety cable through the bridge next to endcap and create a loop with the other end (Fig 3).
5. Snap the free end of the safety cable to the hook and then to the wire guard as shown in Fig 4.
6. Repeat steps 4 and 5 for luminaire opposite corner (Fig 4).

FIG. 4

CAUTION: This fixture is designed for permanent installation in ordinary (Non-Hazardous) locations in accordance with the National Electrical Code and all applicable local codes. Do not use in areas of limited ventilation or in high ambient enclosures. The lamp and fixture operate at high temperatures. Contact with combustible materials can cause fire and personal contact can cause severe burns.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital service, pursuant to Part 15 of the FFC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, many cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

© 2021 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.
4/4/2023

Signify North America Corporation
400 Crossing Blvd, Suite 600
Bridgewater, NJ 08807, USA
Telephone 855-486-2216

Signify Canada Ltd.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
Telephone 800-668-9008

All trademarks are owned by Signify Holding or their respective owners.

References

• Commercial Lighting Company - Commercial LED | Signify

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>