GALAXY AUDIO JIB-PA5 Compact Power Amplifier User Manual
- June 9, 2024
- GALAXY AUDIO
Table of Contents
JIB-PA5 Compact Power Amplifier
User Manual
JIB-PA5 Compact Power Amplifier
http://www.galaxyaudio.com/JIBPA50.php
Introduction
Thank you for choosing the Galaxy Audio JIB/PA50 Compact Power Amplifier. You
have joined the hundreds of thousands of other satisfied Galaxy customers.
Since 1977 Galaxy Audio’s professional experience in design and manufacturing
ensure our products’ quality, performance and reliability.
System Components Warning Statements
Prior to the installation of this product, these installation instructions
must be read and completely understood. Keep these instructions for future
reference.
Proper installation procedure by a qualified service technician must be
followed, as outlined in these installation instructions. Failure to do so
could result in property damage, serious personal injury, or even death.
Galaxy Audio does not warrant against damage caused by the use of any Galaxy
Audio product for purposes other than those for which it was designed or
damage caused by unauthorized attachments or modifications, and is not
responsible for any damages, claims, demands, suits, actions or causes of
action of whatever kind resulting from, arising out of or in any manner
relating to any such use, attachments or modifications. For the most up to
date manual and information visit
www.galaxyaudio.com.
**Features
**
The JIB/PA50 Compact Power Amplifier is an energy-efficient, 50amp Energy Star
rated® Class-D amplifier and is perfect for the classroom or meeting room
environment.
Automatic Standby
Standby mode activates if no input signal is detected for 20 minutes. Once an
input signal is detected the unit resumes normal function.
**Installing the Compact Power Amplifier
**
Wiring Step 1
If you are connecting the sound sources directly to the projector, follow the
suggested Option A wiring diagram (Figure 1) for reference.
If you are connecting the sound sources directly to the JIB/PA50 Power Amp and
are using the external volume control, follow the suggested Option B wiring
diagram (Figure 2) and 10k Pot Volume Wiring Diagram (Figure 3) for
reference. Step 2
-
Use standard RCA connectors and/or 1/8″ (3.5mm) mini-cables to connect the input devices (e.g., the projector, other audio sources) to the power amp.
Match the wiring polarity. For example, red for positive, black or white for negative.
Make sure no wire strand bridges (shorts) the adjacent terminals. -
Insert all four wires on each speaker into the blue 4-pin captive screw plug supplied with the power amp.
Use a #1 Phillips screwdriver to tighten the locking screws. -
Insert the captive screw plug into the receptacle on the amp’s rear panel (see drawing).
-
Attach the power amp plug to the amplifier.
Do you need to wire the 10k pot volume? If Yes, proceed to Step 3 below
Step 3
When wiring the 10V, Vol/Mute and GND outputs, strip off the insulation from
the external volume control wire by 3/16″. Make sure the wire ends do not
touch. Keep
exposed wire ends short after stripping. If the wires touch, they may short
the amp.
-
Follow the 10k Pot Volume Wiring Diagram to connect the external volume control to the amp (Figure 4).
-
Insert all three pins from the external volume control into the green 3-pin captive screw plug supplied with the amp (see drawing).
Use a #1 flat blade screwdriver to tighten the locking screws. -
Insert the captive screw plug into the receptacle on the amp’s rear panel (Figure 5).
Setup
Input 1 Control and Volume Setup If you are using the Option A wiring method of installation on page 3, do the following:
- Insert a #1 flat blade screwdriver to the Input 1 control.
- To test the volume, use the screwdriver to gently turn the Input 1 control on the amp counter-clockwise to the end (Figure 6).
- Turn Input 1 control clockwise 1/4 turn.
- Play sound from the loudest audio source input on the projector to help adjust the amp volume.
- Turn the Input 1 control on the amp clockwise slowly until the sound distorts.
- Turn the Input 1 control counter-clockwise until the distortion disappears.
- Adjust the projector volume until you reach the desired sound level.
If you are using the Option B wiring method of installation on page 3, do the following:
- Insert a #1 flat blade screwdriver to the Input 1 control.
- To test the volume, use the screwdriver to gently turn the Input 1 control on the amp counter-clockwise to the end (Figure 6).
- Turn the Input 1 control clockwise 1/4 turn.
- Turn the 10k pot volume to the maximum level.
- Play sound through all the audio inputs on the amp.
- Choose the loudest audio source to help adjust the amp volume.
- Turn the Input 1 control on the amp clockwise slowly until the sound distorts.
- Turn the Input 1 control counter-clockwise until the distortion disappears.
- Adjust the 10k pot volume until you reach the desired sound level.
After setting up the Input 1, let the sound continue to play and proceed to
the “Input 2 Setup” section on page 6.
Input 2 Control Setup
-
Attach a device such as a wireless microphone to the amp input.
Be sure the mic is turned on. -
Insert a #1 flat blade screwdriver to the Input 2 control.
-
Use the screwdriver to gently turn the Input 2 control on the amp counterclockwise to the end (Figure 7).
-
Turn on the mic receiver, if applicable.
-
Have someone stand in the desired presentation location and speak into the mic.
-
Turn the Input 2 control clockwise until you reach the desired sound level.
-
Test feedback by having someone walk around the room and speak into the mic.
Is there feedback coming from the mic? If Yes, turn the Input 2 control counterclockwise until the feedback is gone. -
If No, continue to step
-
Play music through the amp as you test the mic.
Is the music too loud compared to the voice on the mic?
If Yes, turn the Input 1 control counterclockwise until you reach the desired
sound balance.
If No, you have finished installation.
Technical Specifications
MAKERS OF THE ORIGINAL
HOT SPOT PERSONAL MONITOR http://www.galaxyaudio.com/
THREE YEAR LIMITED WARRANTY
WARRANTY Information can be viewed online at
http://www.galaxyaudio.com/warranty.phphttp://www.galaxyaudio.com/warranty.php
Specifications in this manual are subject to change without notice.
For the most up to date manual and information
visit www.galaxyaudio.com.
1-800-369-7768
www.galaxyaudio.com
© Copyright Galaxy Audio 2013
Printed in Taiwan
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>