PHILIPS BGP760 DigiStreet lighting User Manual
- June 3, 2024
- Philips
Table of Contents
DigiStreet
BGP760/761/762/763
User Manual
BGP760 DigiStreet lighting
| LED COLOUR | 722 E | 727 | 730 | 740 | 757 | 830 |
|---|---|---|---|---|---|---|
| LIGHT SOURCE OF ENERGY EFFICIENCY CLASS | E | E | D | D | D | E |
http://www.lighting.philips.com/main/systems/themes/service-tag.html
|
https://play.google.com/store/apps/details?id=com.philips.servicetag
---|---
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control
conductors.
The light source and/or control gear and/or the external flexible cable
contained in this luminaire shall only be replaced by the manufacturer or his
service agent or a similar qualified person.
Storage, installation, use, operation and maintenance of the products needs to
be performed exactly according the instructions in this manual and/or other
instructions as may be provided by us to guarantee safe use of the product
over its entire lifetime. Failure to adhere to these instructions will
invalidate your entitlement to warranty. Bolts with indication of torque
strength on the drawing need to be tightened using a calibrated torque wrench.
Pre-assembled bolts need to be retightened again to the required torque
specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or
label.
Zhaga-D4i and SR certified compatibility – For Zhaga-D4i/SR-Certified
based luminaires only Zhaga-D4i/SR-Certified components/sensors are to be used
(see also: https://www.zhagastandard.org/products /
https://www.lighting.philips.co.uk/oem-emea/products/driving-connected-
lighting ). The functional compatibility of two SR-certified and/or Zhaga-
D4i controllers/sensors to be used in combination, as well as the override
possibility of any line-switch function used in an SR-based/Zhaga-D4i
luminaire, is to be released by the master controller/sensor supplier. If
using a NEMA 7-pin socket on an SR-based luminaire, a full system verification
is required. Not following this advice can/will cause risk of damage and non-
compliance for which Signify cannot take any responsibility.
©2021 Signify Holding
All rights reserved. Reproduction in whole or in part is prohibited without
the prior written consent of the copyright owner. The information presented in
this document does not form part of any quotation or contract, is believed to
be accurate and reliable and may be changed without notice. No liability will
be accepted by the publisher for any consequence of its use. Publication
thereof does not convey nor imply any license under patent- or other
industrial or intellectual property rights.
Signify Holding
The Netherlands