CANARMNA IFM622A16 Oil Rubbed Bronze Polo Single Light 16 Inch Wide Pendant Installation Guide
- June 12, 2024
- CANARMNA
Table of Contents
CANARMNA IFM622A16 Oil Rubbed Bronze Polo Single Light 16 Inch Wide
Pendant
Product Information
The Easy ConnectTM is a light fixture that requires installation. It comes with a mounting bracket and is designed to be connected to an electrical box. The fixture has electrical wires that need to be connected to the corresponding wires in the electrical box. The product is available in two options: Option 1 for single green, black, and white wires, and Option 2 for multiple green, black, and white wires.
Warning: INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE. DO NOT REMOVE INSULATION FROM FIXTURE.
- WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- CAUTION: RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
- TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
TOOLS AND MATERIALS REQUIRED
INSTALLATION
- Attach Easy Connect™ mounting bracket to electrical box with electrical box screws (not included).
- Option 1: Connect (push) electrical wires from electric box (house wiring) into correct inserts.
- Option 2: For multiple green (ground), black (live) and white (neutral) wires joined in the electrical box (house wiring), attach a single “green”, “black” and “white” jumper wire before connecting. Strip 7mm from the 6” jumper wires supplied. Then connect (push) wires into the correct inserts.
- Connect (push) electrical wires from fixture into correct inserts.
- Tuck electrical wires into electrical box and position fixture over studs on mounting bracket assembly. Secure fixture in place with star washers and cap nuts.
- Remove spinner nut from socket. Position the shade on lamp and secure with spinner nut.
- Install proper bulb type and wattage (not included).
Contact
NEED HELP?
Call or Email us first
- PH: 450-665-2535
- FX: 450-665-0910
- Our service team is ready to answer your questions…
- 1-800-265-1833 (English) / 1-800-567-2513 (French) Monday – Friday 8 AM – 5 PM ES.T.
- IN CANADA – ressalescanada@canarmna.ca
- IN USA – ressalesusa@canarmna.ca
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>