Minka Lavery 2542-726 Park 11 Inch 2 Light Coal and Soft Brass Transitional Vanity Light Bar Instruction Manual

June 12, 2024
MINKA LAVERY

2542-726 Park 11 Inch 2 Light Coal and Soft Brass Transitional Vanity Light Bar
Instruction Manual
Item# 2542-726 (New. 02/18/2022)

2542-726 Park 11 Inch 2 Light Coal and Soft Brass Transitional Vanity

Light Bar

READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

Minka Lavery 2542 726 Park 11 Inch 2 Light Coal and Soft Brass Transitional
Vanity Light Bar - Assembly

MOUNTING THE FIXTURE (Fig. 1)

  1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
  2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.
  3. Thread all thread (E) into crossbar (C). Note: The length of all thread (E) into crossbar (C) may be adjusted, if necessary.
  4. Secure all thread (E) to crossbar (C) using lock washer (B) and hex nut (A).
  5. Take this crossbar assembly (C) and mount it to outlet box (not included) with mounting screws (D) (Size: #8-32N*L0.5”). The side of crossbar marked with “GND” must face out.

CONNECTING THE WIRES (Fig. 2)

  1. Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the crossbar (C) using the green screw provided. After the wires are connected, tuck them carefully inside the outlet box.

COMPLETING THE INSTALLATION (Fig.1)

  1. Place fixture body (F) over all thread (E) and secure with finial (G)
  2. Install (2) two medium base T10 bulb (I) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification — DO NOT EXCEED THE MAXIMUM WATTAGE RATING! .
  3. Place glass shade (J) over socket (H).
    Your installation is now complete. Return power to the junction box and test the fixture.
    Note: Illustration (Fig. 1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

LA-3510E

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

MINKA LAVERY User Manuals

Related Manuals