BELLA PRO SERIES Steam Espresso Machine User Guide
- June 1, 2024
- Bella
Table of Contents
BELLA PRO SERIES Steam Espresso Machine
For first use and to clean the unit, follow the instructions below without adding ground espresso.
INITIAL SET UP
- Make sure the function knob is in the OFF position.
- Plug the unit into a 120V AC electrical outlet. The POWER light should be OFF .
- Remove water tank safety lid by turning it counter-clockwise.
BREWING
-
Fill glass carafe with 2 or 4 cups of cold water (use markings as a guide). Pour water into tank and turn safety lid clockwise until sealed tight.
-
Remove the filter basket by firmly grasping the handle and turning it to the left until the filter basket holder releases.
-
Scoop medium-grind espresso into the filter basket. Fill to the 2- or 4-cup markings inside the filter. Gently tamp.
NOTE: DO NOT fill past the 4 cup marker, it may disrupt the brewing process. -
Align filter basket holder with slots under the machine’s brew head and firmly turn to the right to lock in place.
WARNING: Ensure to completely align the filter basket handle with the locked position icon as shown below. Failure to do so could result in serious injury and damage to the machine during the brewing process. -
Place lid on carafe and return it to drip tray. Align hole in lid under filter nozzle.
-
Turn the function knob to ESPRESSO . The POWER light will illuminate and the unit will begin to build steam. Espresso brewing will begin within approximately 2 minutes.
-
At the end of the brewing cycle, turn the function knob to OFF . The POWER light will turn off.
Unplug the unit after every use.
-
Turn the function knob to STEAM . If steam comes out of the steam wand, then the water reservoir is still under pressure. When the steam wand stops releasing steam, turn the function knob to the OFF position.
-
Remove the water reservoir cap and the filter basket holder.
WARNING: Do not remove the water reservoir cap or brew basket until pressure is completely relieved. Failure to do so could result in serious injury.
WARNING! Read the instruction manual completely. This unit is under pressure and proper handling is required to avoid scalding or injury.