VOLLRATH CM2-12020 Electric Cheese Melter Instructions
- June 1, 2024
- VOLLRATH
Table of Contents
VOLLRATH CM2-12020 Electric Cheese Melter
Wiring
Specifications
- Model: CM2
- Terminal Blocks: Two-position and five-position
- Motor : Fan motor
- Switch : On/Off switch
- Timer : Included
Product Usage Instructions
Wire Connections:
Refer to the wire diagram provided for proper wire connections. Connect
wire #10 to T1 and wire #11 to T2. Ensure all connections are secure.
Terminal Blocks
Use the two-position terminal block for connecting the fan motor. Connect
T1 and T2 to the designated terminals on the block. For additional
connections, utilize the five-position terminal block following the provided
diagram.
Switch and Timer
Use the on/off switch to control the operation of the device. The timer can
be set according to your requirements for automated functionality. Refer to
the rear view of timer connections for proper setup.
Plug and Power
Ensure the device is plugged into a suitable power source as indicated on
the product label. Verify all connections before turning on the device.
FAQ
Q: How do I reset the timer?
A: To reset the timer, locate the reset button and press it using a
suitable tool or object. The timer will then be reset to its default settings.
Q: What do the different wire numbers signify?
A: The wire numbers correspond to specific terminals or components for easy
identification during installation. Refer to the wiring diagram for accurate
connections.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>