GOLDEN LIGHTING 3415-FM BLK-CLR Flush Mount Light Instruction Manual
- June 12, 2024
- GOLDEN LIGHTING
Table of Contents
GOLDEN LIGHTING 3415-FM BLK-CLR Flush Mount Light
Product Information
The product is a lighting fixture manufactured by Golden Lighting. It is available in model number 3415-FM BLK-CLR. The fixture is designed to provide both task and ambient lighting in various areas of your home, such as kitchen islands, dining rooms, and open spaces. It is recommended to use coordinating fixtures like sconces, flush mounts, and pendants to achieve layered lighting and enhance the aesthetic appeal of your space.
Product Usage Instructions
Pendants & Linear Pendants Above a Kitchen Island
To properly install pendants or linear pendants above a kitchen island, follow
these steps:
- Center a linear pendant over the island.
- If using hanging pendants, use one pendant for every 24 inches of the island.
- The fixtures should hang at least 30 inches above the countertop.
Pendants & Chandeliers Above a Dining Room Table
When installing pendants or chandeliers above a dining room table, follow
these guidelines:
- The fixtures should stay at least 30 inches above the table.
- Choose a fixture that is 12 inches narrower than the width of the table.
Pendants and Chandeliers in Open Areas
When hanging pendants and chandeliers in open areas, consider the following:
- The bottom of the fixture should hang at least 7.5 feet from the floor.
- Ensure there is enough clearance for any opening doors.
To ensure the best lighting experience, it is recommended to install the lights with dimmers that allow you to control the level of light output. For further assistance and expert lighting advice, visit www.GoldenLighting.com.
Note:
For any assembly instructions or replacement parts, please contact the place
of purchase.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style!
Browse our site for coordinating lights and expert lighting advice. To help
create the perfect look, visit
www.GoldenLighting.com.
Dimension
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant
for every 24″ of the island. Fixtures should hang at least 30″ above the
countertop.
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″
narrower than the width of the table.
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for
any opening doors.
For Customer Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT:
- All installation work should be done by an accredited professional.
- Shut off the power supply at the fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
Assembly Instructions
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power at
the circuit breaker and remove the old fixture from the wall, including the
old mounting strap.
-
Mounting strap (B) contains several threaded holes, find the pair of holes that matches the spacing of the holes on the junction box. Two sets of mounting screws (A & D) should be attached to the mounting strap (B). You may need to tighten the nuts (C) that hold these screws in place. If the screws are not attached, please hold canopy (F) up to the mounting strap (B). Line up the holes in the canopy (F) with the holes in the mounting strap (B) and insert mounting screws (A) into the mounting strap (B) so that mounting screws (A) protrude through the holes in the canopy (F). Mounting screws (A) are long, so please test the canopy against the mounting strap to see how far you should insert the screws. Tighten nuts (C) onto mounting screws (A) to hold the screws in place.
-
Place mounting strap (B) over the junction box. Secure the mounting strap (B) to the junction box using mounting screws (D) and a screwdriver. Tighten the screws securely. Pull house wires for the center of the mounting strap.
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation. Please proceed to the next step.
CONNECTING THE WIRES -
Have an assistant support the fixture’s weight while completing the wiring. Refer to the wiring diagram and attach the fixture’s wires to the power supply wires from the junction box. Attach the fixture’s wires to the power supply wires from the junction box. Connect Hot to Hot (transparent wire with black inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with white inner thread, white, or ribbed wire), and Ground to Ground (transparent wire with green inner thread, green wire, or copper). Twist the ends of the wire pairs together, and then twist on a wire connector. Make sure all twists are in the same direction. If there is no house ground wire coming from the junction box, locate ground screw (E) on the mounting bracket/mounting strap and wrap the fixture’s ground wire around the ground screw. Use a screwdriver to tighten the top of the ground screw (E) onto the wires and into the mounting bracket/mounting strap. Tuck the wires into the junction box.
How to Identify the Fixture’s Wires- Hot: Smooth, Black, or Transparent with Black Inner Thread
- Neutral: Ribbed, White or Transparent with White Inner Thread
- Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
FINISHING THE INSTALLATION
-
Hold the canopy (F) over the mounting strap (B) so that the holes in the mounting strap (B) line up with the holes in the canopy (F). Thread the deco nuts (H) onto exposed threads of the mounting screws (A) until canopy (F) is snug against the ceiling. 5. Install light bulbs (not included) to the socket (I) in accordance with the fixture’s specifications. Do not exceed the maximum recommended wattage. 6. Carefully attach glass (K) to the canopy (F) and secure the glass with the small screw (G) to the canopy (F). Your installation is now complete. Turn on the power and test.
Contact Information
Get help, quick tips, and explore curated content
Follow Us
- Facebook: @GoldenLighting
- Instagram: @GLFixtures
- Twitter: @GoldenLighting1
- Pinterest: @GoldenLighting
- GoldenLighting.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>