FRONTIER VMS1100 FMS2 Fiber TV Installation Guide
- June 15, 2024
- FRONTIER
Table of Contents
Fiber TV
Self-install guide
17046_0622_FiberTV_SIG
Frontier Fiber TV equipment:
Internet router set up
Tips
- For best Wi-Fi coverage, place your router in a central location
- If you are also connecting TV equipment, install your router first
A If you received a MoCA adapter, follow Step A (the red connections)
–Or—
B If you did NOT receive a MoCA adapter, follow Step B (the blue
connections)
TV equipment set up
Tips
- Your router must be connected to the internet before installing and activating your TV equipment
- If you received a DVR device, this box must be installed/activated before the other Set-Top Boxes (STB)
Press the STB power button on the remote control, turn the TV on and follow
the prompts for activation
Follow the TV screen prompts for activation
The activation of your video equipment is automatic and will complete within
30 minutes.
Installing a DCT700 Digital Adapter
-
Connect the coax wire from the wall outlet to the COAX IN port on the DCT700 Digital Adapter.
-
Connect the 2nd coax cable from the COAX OUT port on the DCT700 Digital Adapter to the TV coax port.
Note: RCA cables R/W/Y (not provided) could be used in lieu of coaxial cables from the adapter to the TV. -
Connect the power adapter cable to the DCT700 power port.
-
Plug the power adapter cable into the electrical outlet.
-
Use the remote control to power on the device.
-
Contact Frontier to activate the device at 1-866-739-4319.
Installing a CableCARD
The Motorola/Arris CableCARD, also known as the M-Card (Multi-stream Card) is leased separately for those that wish to use CableCARD-ready devices (such as TiVO or HDHomeRun and some television manufacturers) versus a digital High Definition set-top box.
-
Connect the CableCARD ready device to the home coaxial network.
-
Verify that all cables are connected correctly by following the device manufacturer instructions (power, HDMI or Audio / Video cables).
-
Write down the CableCARD (M-Card) serial number and Unit Address before inserting into the device (refer to the device manual for instructions on which slot to use).
-
Insert the CableCARD into the device following manufacturer device manual.
-
If a menu does not immediately appear, navigate to the device settings screen (CableCARD Pairing) to find the Host ID and Data ID:
-
Record the Host ID and Data ID numbers and contact Frontier for activation.
We’re available 24/7 at 1-866-739-4319.
• Note: Each time the CableCARD is removed from the device the Data ID will change.
A call to Frontier will be required to update the CableCARD if the card is removed and reseated.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>