nVent BC8PSM Conduit to Beam Clamp 1 2 Inch Emt 0.5 Inch Max Flange Owner’s Manual

June 16, 2024
nVent

nVent BC8PSM Conduit to Beam Clamp 1 2 Inch Emt 0.5 Inch Max Flange

Product Information

Specifications

  • Catalog Number: BC8PSM
  • Material: Spring Steel
  • Finish: nVent CADDY Armour
  • EMT Conduit Size: 1/2
  • Flange Thickness: 1/2
  • Max Torque: 2.21 ft lb
  • Ultimate Static Load: 15 lb

Features
The BC-PSM Conduit to Beam Clamp offers the following features:

  • Easy installation to beam flanges
  • Eliminates offset bending conduit

Product Usage Instructions

Installation
To install the BC-PSM Conduit to Beam Clamp, follow these steps:

  1. Select a suitable location on the beam flange for installation.
  2. Place the clamp over the beam flange, ensuring it is securely positioned.
  3. Tighten the clamp using an appropriate tool, applying the specified torque of 2.21 ft lb.
  4. Verify that the clamp is securely attached to the beam flange.

Conduit Attachment
To attach EMT conduit to the BC-PSM Conduit to Beam Clamp, follow these steps:

  1. Select the desired length of EMT conduit.
  2. Secure the conduit in place using appropriate fasteners or fittings.
  3. Repeat the process for any additional sections of conduit.

Warnings
It is important to follow the instructions and warnings provided by nVent to ensure safe and proper usage of the BC-PSM Conduit to Beam Clamp. Failure to do so may result in product malfunction, property damage, serious bodily injury, and voiding of the warranty.

Contact Information
If you have any questions or need further assistance, please contact nVent customer service:

  • Europe Netherlands: +31 800-0200135
  • France: +33 800 901 793
  • Germany: 800 1890272
  • Other Countries: +31 13 5835404
  • APAC Shanghai: +86 21 2412 1618/19
  • Sydney: +61 2 9751 8500

Brand Information
nVent is a trusted brand that offers a powerful portfolio of products. Some of the brands under nVent include CADDY, ERICO, HOFFMAN, RAYCHEM, SCHROFF, and TRACER. All trademarks and copyrights belong to their respective owners.

Specifications Changes
nVent reserves the right to change specifications without notice.

FAQ

  • Q: Where can I find the product instruction sheets?
    A: Instruction sheets for nVent products are available at www.nvent.com or from your nVent customer service representative.

  • Q: What happens if I don’t follow the instructions and warnings?
    A: Failure to completely follow nVent’s instructions and warnings may result in product malfunction, property damage, serious bodily injury, and voiding of the warranty.

FEATURES

  • Easy installation to beam flanges
  • Eliminates offset bending conduit

PRODUCT ATTRIBUTES

  • Material: Spring Steel
  • Finish: nVent CADDY Armour
  • EMT Conduit Size: 1/2″
  • Flange Thickness: 1/2″ Max
  • Torque: 2.21 ft lb
  • Ultimate Static Load: 15 lb

DIAGRAMS

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support

Europe

  • Netherlands: +31 800-0200135
  • France: +33 800 901 793

Europe

  • Germany: 800 1890272
  • Other Countries: +31 13 5835404

APAC

  • Shanghai: + 86 21 2412 1618/19
  • Sydney: +61 2 9751 8500

© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.

nVent.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals