ALOGIC DV4 Universal Quad Display Docking Station User Manual

ALOGIC DV4 Universal Quad Display Docking Station

Product Overview

1. USB-A 3.2 Port – 5 Gbps
2. SD Card Slot
3. microSD Card Slot
4. USB-C Port – 5 Gbps
5. 3.5mm Combo Jack
6. LED Indicator
7. USB-C with Power Delivery (to Computer)
8. USB-C PD input (100W/20V/5A)
9. HDMI Video (to Monitor)
10. DisplayPort Video (to Monitor)
11. HDMI Video (to Monitor)
12. Gigabit Ethernet Port
13. USB-A 2.0 Port – 480Mbps
14. Security Lock Slots

QUAD DISPLAY
UNIVERSAL DOCKING STATION – DV4 WITH LAPTOP CHARGING PASS-THROUGH

Package Contents

1. DV4 Docking Station
2. USB-C Cable
3. USB-C to USB-A Adapter
4. User Manual

Instructions

Thank you for purchasing this quality ALOGIC product. Please read these instructions for help with setting up the device and keep them handy for future reference. Refer to the accompanying images on page 5 for additional information.

Installing the Drivers

The dock uses DisplayLink technology to provide universal multi-monitor support for a wide range of computers and operating systems. The latest DisplayLink software should be installed following these steps:

• Download the DisplayLink driver for your operating system from www.displaylink.com/downloads
• Run the installer once downloaded and follow the prompts
• Restart your machine
• Additional assistance for installing the DisplayLink software can be found here: https://bit.ly/3guFvg7

Connecting a Power Adapter (Optional)

The dock can operate using power from the computer USB port that it is connected to or from an external USB Power Delivery (PD) power adapter (not included). Connecting a power adapter is recommended to ensure that the dock receives enough power to power all accessories that may be connected. When the dock is powered by the USB port on the computer it can only supply as much power to any connected devices as it receives from the computer. Connecting high-powered accessories or trying to charge mobile devices from the dock without a power adapter connected may cause the dock to shut down if the power available from the computer’s USB port is exceeded.

When a USB PD power adapter is connected to the USB-C PD input the dock will accept up to 100W of power; securing 15W to power the dock and making any remaining power available to charge the computer. The USB PD power adapter chosen for use with the dock should be rated at least as high as the wattage of the laptop’s original charger plus 15W, up to a maximum of 100W. Using a 100W PD power adapter with the dock is recommended and will provide adequate power to charge most laptops (85W).

Note that the computer must support USB PD charging for passthrough charging to work and USB PD charging will only work when the dock is connected to a USB-C port on the computer. USB PD charging does not work with USB-A ports (such as when the USB-A adapter is used to connect the dock to the computer). Some high-performance laptops require more power than the 85W maximum that this dock can provide; the original laptop charger for these computers should be connected directly to the laptop. There is no risk of damage to the laptop if separate

USB PD power adapters are connected to the dock and the computer at the same time. Not every USB-C port on notebook computers supports charging. If your computer doesn’t start charging when a power supply is connected to the device and the device is connected to your computer, try connecting the dock to a different USB-C port on your machine or consult the computer’s manual to determine which USB-C ports accept power from USB PD power sources.

Connecting the Dock to the Laptop
Connect the included USB cable between the USB-C port labelled TO COMPUTER on the front of the dock and your computer. Connecting the dock to a USB-C port on the computer is recommended to ensure that all video outputs can be used. If a USB-C port is not available on the computer, the dock may be connected to a USB-A port using the USB-C to USB-A adapter supplied with the dock. When the dock is connected to a USB-A port on the computer the DisplayPort 1 and HDMI 1 video outputs will not be available for use.

The dock will be detected and configured by your computer automatically when connected. This process will take a few seconds the first time you plug the device into your laptop. You may receive a notification that it has been installed and is ready for use.

Connecting Devices to the Dock
Connect external devices such as monitors, USB devices, Ethernet network cable and headphone/mic to the dock, as necessary. Refer to Page 2 and 3 of these instructions for an outline of the available ports and their functions.

Resolution Support Table

The quantity and resolutions of video outputs supported depend on the specifications and available ports of the connected computer. The table below provides the maximum output resolutions available for Windows computers based on the version of DisplayPort Alternate mode supported on their USB-C ports.

When connected to Apple Mac computers the DisplayPort 1 and HDMI 1 outputs will be mirrored. When used with a Mac this docking station is suitable for use with up to three monitors but cannot be used for multiple monitor extended desktop configurations where four independent monitors are required.

USB Port Video Support

The second and third HDMI 1) outputs on the docking station use DisplayLink technology and will work when the dock is connected to any USB port on a computer. If using the first HDMI © or DisplayPort 10) output on the docking station to connect to a monitor, the dock must be connected to the computer using USB-C. It is also important to understand that not all USB-C ports on computers support video output using the DisplayPort Alternate Mode standard, used to send video from the computer to these outputs.

The device can be used with USB-C ports which do not support video output as well as USB-A ports (using the included adapter) however you will | not be able to connect the first HDMI (9) or DisplayPort 40 output to an external monitor and show video. HDMI 2 and HDMI 3(1) outputs and the other ports (Ethernet, audio and USB ports) will be functional.

Troubleshooting

Specifications

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

EU Declaration of Conformity
Hereby, ALOGIC Corporation declares that this product complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address by clicking on the Compliance Documentation link: www.alogic.co

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>